Customers in the Midwest and Eastern parts of the USA, please be advised of potential delays in delivery due to inclement weather in your region. ADC regrets any inconvenience this may cause. For specific details regarding this delay and how your specific zip code may be effected please visit FedEx Service Alerts
Terminator I/O is the most practical distributed I/O system you can buy.
Add low-cost field I/O (such as a digital I/O module) to your programmable logic controller (PLC)
or PC-based industrial control system
Terminator I/O provides you with an industrial I/O system with remote I/O, distributed I/O and digital I/O module capabilities.
It combines the I/O points with their field terminations into a modular package to save panel space and money.
With Terminator I/O, you can use distributed I/O nodes close to field devices for faster and more efficient wiring
Terminator I/O was custom-designed for AutomationDirect by Koyo (the same people who designed the
original GE Series One PLC), a trusted name in control technology since 1983.
Network interface modules supporting Ethernet, Profibus, DeviceNET, MODBUS and Koyo remote I/O;
some adapters include an on-board RS232 serial port.
Discrete and analog industrial I/O modules with modular terminal bases
Configuration flexibility by plugging together a network interface module with up to 16 I/O modules.
Use local expansion for large I/O drops. No more confining I/O bases.
AC or DC power supplies. For high power systems, combine multiple supplies on a single I/O set.
All analog ranges are software configurable - no jumpers required!
"Hot-swap" analog modules for fast system repair
Terminator I/O High Speed Counter Module
8 DC sink/ source inputs 9-30 VDC, 4 isolated sink/ source DC outputs, 5-30 VDC, 1 A per point
2 quadrature encoder counters up to 100 KHz, or 4 single channel counters up to 100 KHz,
and 4 high speed discrete inputs for Reset, Inhibit, or Capture
4 independently configurable high speed discrete outputs or 2 channels pulse output
control, 20 Hz - 25 KHz per channel, pulse and direction or cw/ ccw pulses. NOTE: (Use with T1K-16B or T1K-16B-1 terminal base.)
Local expansion up to two additional rows!
Full backplane expansion through cables
Connect up to 16 modules across three total rows by plugging expansion cable from the right side of one
module to the left side of the next - the system automatically recognizes the I/O!
Optional cable that includes 24 VDC pins maximizes your power supply capability