SureServo Low Inertia Systems

Low inertia motor models:

• 100 W, 200 W, 400 W, 750 W and 1 kW



• Speeds up to 5,000 rpm. (4,500 rpm for 750 W and 1 kW models)

Low inertia motor features include:

• Square flange mounting with metric dimensions: 40, 60, 80, and 100 mm flanges
  
  
• Keyless drive shafts support clamp-on style coupling
  
  
• Integrated encoder with 2,500 (x4) pulses/revolution plus marker pulse (once per revolution)
  
  
• Optional 24 VDC spring-set holding brakes
  
  
• Standard hook-up cables for motor power/brake and encoder
  
  
• Standard DIN-rail mounted ZIPLink break-out kit for the drive CN1 connector (with screw terminal connections)

Low Inertia System Selection

Ordering Guide Instructions

Don't forget the cables and ZIPLink Break-Out Board Kit!
Select the "Technical Info" tab above to review the four page ordering guide for the eight standard SureServo systems. Each of the eight standard systems has a torque-speed curve including the motor inertia for reference. This is the fundamental information that you need to select the servo drive and matching motor for your application.

Included in the ordering guide are the available connection cables from the drive to the motor in standard lengths from 10 to 60 feet. The break-out board kit including 0.5 m (19 inch) cable for the CN1 user interface is listed for your convenience. All cables are 100% factory tested to make your system installation as easy and quick as possible. See the "Accessories" section for regeneration resistors, AC line filters, fuses, contactors, and RF noise filters.

We highly recommend that you order all five of the following items per system as a minimum:

• 1. A Servo Drive
• 2. A Servo Motor
• 3. A Motor Power Cable
• 4. A Motor Encoder Cable
• 5. A ZIPLink Cable Kit (order part no. ASD-BM-50A, which works with all SureServo systems)