IronHorse™ General Purpose DC Motors
IronHorse permanent magnet DC electric motors ranging from 1/3 to 2 Horsepower
IronHorse electric motors are manufactured by a leading motor supplier with over 20 years experience delivering high-quality
motors to the demanding U.S. market. Our supplier produces these permanent magnet DC motors in an ISO9001 facility which tests the electric motors during
production and after final assembly. This is how we can stand behind our IronHorse permanent magnet reversible DC motors with a
two-year warranty.
- In stock and ready to ship
- FREE ground shipping on DC electric motor orders over $49*
- 30 Day money-back guarantee
- 2-Year warranty on all IronHorse DC motors!
The IronHorse Permanent Magnet DC Motor (PMDC) Design:
- Use on unfiltered SCR (Thyristor) type rectified AC input
- May also be used with PWM (pulse width modulated) type DC adjustable speed drives
- Input power of 115 or 230 volts rectified AC can be used with an appropriate SCR drive (90 VDC or 180 VDC)
- Linear speed/torque characteristics over entire speed range
- High starting torque for heavy load applications
- Capable of dynamic braking for faster stops
- Reversible rotation
- Simple two-lead connection
|
|
Features
- Available in TENV or TEFC depending on model
- NEMA 56C flange mount
- Rolled steel shell frame / cast aluminum end bell
- Removable base
- Space-saving design
- Large brushes for longer brush life
- Easy access to DC motor brushes (DC motors ship with one set of
brushes installed and one set of spare brushes in the box)
- Large easy-to-wire junction box with rubber gasket
- Heavy duty oversized ball bearings
- High tensile strength steel shaft
- Large easy to read nameplate
- Electrically reversible
- Class F winding insulation
- Service Factor: 1.0
- Two year warranty
- cCSAus certified, CE
IronHorse DC electric motor prices start at $133.00
IronHorse General Purpose DC Motors Overview 
*shipped standard ground or LTL (see Shipping Options for complete details and restrictions)
|
Applications
- Conveyors
- Turntables
- Where adjustable speed and constant torque are required
- When dynamic braking and reversing capabilities are needed
The IronHorse DC Motor Lineup:
|
Form Factor
The voltage used to power a permanent magnet (PM) DC motor
is not pure DC. It is derived by rectifying a supplied AC voltage.
The resulting DC voltage has a ripple that is related to the
frequency of the AC input.
Form factor is the ratio of Irms to Idc and indicates how close the
driving voltage is to pure DC. The form factor for a DC battery is
1.0. The higher the form factor is above 1.0, the more it deviates
from pure DC.
Form factor should not exceed 1.35 for continuous operation.
Half wave rectification is not recommended as it drastically
increases form factor.
Operating Ironhorse PMDC motors with DC voltages with form
factors higher than 1.35 can result in premature brush failure and
excessive motor heating.
|
For more product details - select the "Products" tab and click on the desired "Item Code", or select the "Technical Info" tab.
This is the printable version of: 
Updating...