Process Controls
SOLO Temperature Controllers / Process Controllers
AutomationDirect’s SOLOTM is a single loop dual output temperature controller / process controller that can control both heating and cooling simultaneously.
- 1/32 DIN, 1/16 DIN, 1/8 DIN, or 1/4 DIN panel sizes available
- Four types of control modes: PID, ON/OFF, Ramp / Soak and Manual.
- Available outputs include relay, voltage pulse, current, and linear voltage (depending upon controller model)
- Up to three alarm outputs available (The SL4824 series supports only one)
- Seventeen alarm types available in the initial setting mode
- Accepts thermocouple, RTD, or analog inputs
- Built in RS-485 interface using Modbus slave (ASCII or RTU) communication protocol
SOLO Temperature Controllers / Process Controllers Overview  |
SOLO Controller Family |
Signal Conditioners
Signal integrity starts with quality measurement and good equipment. However, even with the best equipment
signals can be degraded if the equipment is not properly installed. Signal integrity can be greatly
impacted by poor shielding and wiring practices. The biggest factor is ground loop errors (ground noise).
Our signal conditioners protect your expensive electronic equipment against ground loops with up to 1500 V of
isolation.
The following signal conditioners are available:
- FC-11 - 4-20 mA loop-powered isolated signal conditioner
- FC-33 - DC selectable signal conditioner
- FC-R1 - Loop-powered signal conditioner for RTD signal
- FC-T1 - Signal conditioner and isolator for thermocouple/ mV input signal
Signal Conditioners Overview
|
Timers
AutomationDirect offers solid-state timer relays brought to you by two leaders in the industry,
FUJI Electric and Koyo.
FUJI Electric has been in business since 1923 and has been selling timer relays in the U.S. since 1970. All FUJI
products are produced under ISO9001 and ISO14000 criteria. Koyo has been selling timers for over 30 years.
All timers meet UL and CE conformity.
Whether you need a miniature DIN timer, a 1/16 DIN timer, or a full-blown 1/16 DIN digital timer,
and whether you need to time in seconds or hours, AutomationDirect can supply a timer relay that fits
your needs.
Koyo Timers Overview
|
NOTE: For further details or specifications, select a product category and then select the "Products" tab and
click on the desired "Item Code" link, or select the "Technical Info" tab.
|
