Pressure Switches, Pressure Transducers and Vacuum Transmitters

• ProSense pressure switches and vacuum sensors are a solid-state solution to mechanical pressure switches.
  
  
• These pressure sensors are smaller and easier to install than traditional mechanical pressure switches.
  
  
• Flexible film circuitry enables the system components to be mounted on flexible film rather than a rigid circuit board. The film is then rolled and placed inside a compact, stainless steel housing.
  
  
• ProSense offers pressure sensing solutions using capacitive sensing technology and strain gauge technology. The capacitive sensing technology sensors incorporate the same ceramic pressure measuring cell sensing technology found in high accuracy pressure transmitters.
  
  
• Vacuum sensors provide an accurate readout of increases and decreases in vacuum systems. With no moving parts such as pistons or springs that can stick or break, ProSense pressure sensors and vacuum sensors are a solid-state solution to mechanical switches.

• The pressure switch detects pressure ranges up to 5800 psi (400 bar).
• The one-piece welded measuring cell is capable of over 50 million switching cycles.
• Mechanical adjustment dials rotate quickly to establish the setpoint and resetpoint. The electronic pressure sensor is adjustable without system pressure and supply voltage and does not require calibration.

PSD series pressure switches $89.00

• The pressure transmitters offer quick installation and easy setup.
• Pressure transmitter output options include 4 to 20 mA or 0 to 10 V.
• Vacuum transmitters offer 20 to 4 mA or 10 to 0 V.
• New! ... five additional input ranges for higher and lower pressures.

PTD series pressure transmitters $125.00