Double-Level Terminal Blocks and Accessories

DINnectors™ (DIN Rail Terminal Blocks)

Quality materials Self-locking clamps High-contact pressure Low voltage drop Gas-tight electrical connections Double-Level Terminal Blocks offer twice the wiring density of single level feed-through blocks. The DN-D10X version is supplied with an internal jumper to common all four of its connection points. DN-D10xxx-A 24 to 10 AWG DN-D10X-A 24 to 10 AWG, Jumpered LED Terminal Blocks These terminal blocks provide built-in LED indicators. The LED illuminates when voltage is present. The LED1 version is for 24V AC/DC circuits, and includes current-limiting elements. DN-D10LED1-A 24 to 10 AWG Diode Terminal Blocks Typically, an inductive load produces a spike (neg.-going) when it is turned off. These terminal blocks with built-in clamping diodes help protect your PLC’s output circuits. DN-D10DR-A 24 to 10 AWG

Double-level terminal block features: Available in a variety of colors Virtually vibration-proof clamping system Internal jumpers Protective moldings Funneled wire entry Wire stops Snap-on solid foot Captive screws Zinc dichromate-plated, hardened steel screws and clamps Nickel-plated, copper current bar Marking system

Terminal Block General Accessories DIN Rail (15mm & 35mm) End brackets End covers Angled DIN rail support brackets Top terminal block covers Separators Jumpers Screwdrivers Wire cutter/stripper tools Marking tags and accessories (blank and printed tags, tag adapter, indelible marking pen, etc.)

DINnector Double-level Terminal Blocks Overview