Thermocouple Terminal Blocks and Accessories
DINnectors™ (DIN Rail Terminal Blocks)
- Quality materials
- Self-locking clamps
- High-contact pressure
- Low voltage drop
- Gas-tight electrical connections
New! ... Thermocouple Terminal Blocks
Thermocouple terminal blocks are designed
with only one screw clamp to provide suitable
connections to thermocouple sensors.
- The DN-THERM1 and DN-THERM2 clamping yoke terminal blocks have been designed to accept any type of thermocouple
lead connection within their rated wire size ranges.
- The thermocouple leads are simply stripped of their insulation to 20mm (0.79”), and then inserted into the
terminal block where the two wires overlap.
- The leads are clamped together on both sides of the terminal block resulting in an excellent electrical connection to the thermocouple
without the need for any other compensation metals/contacts.
DN-THERM1 50V AC/DC, 30-20 AWG
(no amp rating, intended for thermocouple wires only)
DN-THERM2 300V, 10A, 20-16 AWG
|
Thermocouple terminal block
shown with end cover open
|
Terminal Block General Accessories
- DIN Rail (15mm & 35mm)
- Angled DIN rail support brackets
- End brackets
- End cover (included)
- Screwdrivers
- Wire cutter/stripper tools
- Marking tags and accessories
(blank and printed tags, tag adapter, indelible marking pen, etc.)
|
DINnector Thermocouple Terminal Blocks Overview 
|
