Ground Terminal Blocks
DINnectors™ (DIN Rail Terminal Blocks)
- Quality materials
- Self-locking clamps
- High-contact pressure
- Low voltage drop
- Gas-tight electrical connections
Ground Terminal Blocks
Ground terminal blocks are used to mechanically and electrically connect wires to the DIN rail by means of a conducting clamping foot.
In this way, the DIN rail can function as a ground bus bar. Ground terminal blocks are molded in green and yellow per international
standards. The use of an end bracket is not required when a ground block is positioned at the end of a terminal block assembly.
- DN-G10 26 to 10 AWG
- DN-G8 22 to 8 AWG
- DN-G6 20 to 6 AWG
- DN-G4 14 to 4 AWG
- DN-G1/0 14 to 1/0 AWG
- DN-MG10 18 to 10 AWG Mini ground block for 15mm wide DIN rail
|
Ground Terminal Block
Mini Ground Terminal Block |
Ground terminal block features:
- Standard ground blocks are available in green and yellow
- Available in 4 AWG, 6 AWG, 8 AWG, 10 AWG and 1/0 AWG models
- Virtually vibration-proof clamping system
- Internal jumpers
- Protective moldings
- Funneled wire entry
- Wire stops
- Snap-on solid foot
- Captive screws
- Zinc dichromate-plated, hardened steel screws and clamps
- Nickel-plated, copper current bar
- Marking system
|
Terminal Block General Accessories
- DIN Rail (15mm & 35mm)
- Angled DIN rail support brackets
- Top terminal block covers
- Separators
- Jumpers
- Screwdrivers
- Wire cutter/stripper tools
- Marking tags and accessories
(blank and printed tags, tag adapter, indelible marking pen, etc.)
|
DINnector Ground Terminal Blocks Overview 
null
|
