Cable / Cord Grips: Strain Reliefs, Drop Support Grips and Pull Grips
New! ... Bryant® Wire Management Products - Wire and Cable Strain Relief Grips
- Deluxe Cord Strain Reliefs
- Dust-Tight Strain Reliefs
- Standard Duty Support Grips
- Bus Drop Support Grips
- Low Tension Pull Grips
Strain Reliefs are used to connect cable enclosures and industrial equipment. These strain relief cord grips prevent cable
pullout at the point of termination due to tension, vibration, flexure or motion.
Used in conjunction with bus drop support grips and safety springs, strain reliefs are an integral part of an overall cord support and strain relief system.
Support Grips are applied to the vertical or horizontal runs of cable or service lines to support dead weight and reduce potential damage
due to breakage or stress.
Pull Grips / Cable Pullers are designed to serve as reusable tools for light industrial pulling of electrical cable and for underground
and industrial plant wiring and re-wiring.
 Cord Grips: Strain Reliefs, Drop Support Grips & Pull Grips
|
Industrial Wiring Devices:
Cable / Cord Grips: Strain Reliefs, Drop Support Grips and Pulling Grips
|
 |
Deluxe Cord Strain Relief Grips
These grips are suitable for indoor or outdoor use where subject to moisture, splash or washdown. Examples are crane hoist and pendant drop stations,
hand tools, pumps, and processing equipment.
- Endless mesh weave for easy installation
- Indoor and outdoor applications
- Provides arc-of-bend control
- Stainless steel wire mesh grips
- Corrosion resistant
- Liquid-tight and dust-tight grips
- Range: 0.187" – 1.687" cable diameter
- Deluxe cord strain reliefs start at $29.00
(DC3712, DC5012)
|
 |
Dust-Tight Strain Reliefs
Ideal for use in bus drop grip systems, motor connections, panel boards, and internal wiring of machines.
- Dust-tight gripper
- Galvanized steel mesh
- For indoor applications only
- Range: 0.32" – 1.70" cable dia.
- Dust-tight strain reliefs start at $9.00
(BDSR32, BDSR43)
|
 |
Standard Duty Support Grips
These cord / cable grips are designed to be used indoors for cable support where flexible cable connects electrical equipment to the bus duct.
Applications also include support for hanging air hoses and water hoses.
- Single U eye closed mesh fits over cable end
- Indoor and outdoor applications
- Split mesh grip is used when cable end is inaccessible
- Strand equalizers reinforce gripping strength and position; distributes load equally
- Range: 0.54" – 1.74" cable dia.
- Standard duty support cord grips start at $15.50
(SPC050U)
|
 |
Bus Drop Support Grips
Bus drop cable support grips are applied to the vertical or horizontal runs of cable or service lines to support dead weight and reduce potential damage due to breakage or stress.
- Light duty
- Strand equalizers position wires for equal loading
- Single variable weave
- Indoor use only
- Range: 0.24" – 1.25" cable dia.
- Bus drop cable support grips start at $7.00
(BDS24U)
|
 |
Low Tension Pulling Grips
These cable puller grips offer protection from abrasion and ease the cable through bends and rough surfaces. Pull grips also serve as a temporary splice, when replacing
old cable with new, and to pull slack in new construction or maintenance operations.
- Ideal for use in utility work, industrial and commercial building service lines, underground transmission line stringing
- Light Duty Range: 0.75" – 1.74" cable dia.
- Junior Range: 0.25" – 1.24" cable dia.
- Low tension pulling grips start at $15.00
(PJ025)
|
Cable / Cord Grips Overview 
For more product details - select the "Products" tab and click on the desired "Item Code", or select the "Technical Info" tab.
This is the printable version of: 
Updating...