ST0S1 through ST0S8 shutters for M18 (18mm) through-beam sensors (SSE / SSR Series)
Reduces the emitted beam, allowing the detection of small
Shutter consists of a threaded ring-nut, a protective lens,
an O-ring and an aperture, which screws onto the optical head of
both the emitter and receiver.
ST03 right-angle M18 (18 mm) beam adapter
For use with M18 retro-reflective and through-beam photoelectric
switches Allows 90° light detection using an internal
mirror set at 45° to the optical axis. Sensitivity loss is about
ST02 plastic swivel bracket M18 (18mm)
Plastic mounting bracket for use with M18 photoelectric switches.
Has a ball-joint and set screws to adjust sensor orientation.
Allows orientation in all directions for retro-reflective and
ST18A axial bracket Metal mounting bracket
for M18 (18 mm) sensors. Has two mounting holes (use 4 mm screws)
and allows the rotation of an optical axis for right-beam-angle
adapter sensors. Includes hexagonal nuts to secure sensor.
ST18C metal right-angle bracket Metal
angular mounting bracket for M18 (18 mm) sensors. Has two mounting
holes (use 4 mm screws) and allows the rotation of an optical axis
for axial sensors. Includes hexagonal nuts to secure sensor.
for Cutler-Hammer High Performance Rectangular Photoelectric Sensors (Enhanced 50 Series).
Choose short, tall or ball-swivel style of mounting brackets depending on your needs. All styles allow 360° rotation of
Available models include:
6150E-6501 - Short right angle metal mounting
bracket. Allows full 360° rotation of sensor and up to 1.5" of
vertical adjustment. Nickel plated.
6150E-6502 - Tall right angle metal mounting bracket.
Allows full 360° rotation of sensor, up to 1.5" of vertical
adjustment in each slot, and 3.5" over overall positioning
6150E-6503 - Right angle plastic mounting bracket
with ball swivel. Allows full 360° rotation of sensor. Ball
swivel allows for +/-30° sensor angle