Attention Hubbell-Wiegmann Enclosure Customers: Effective March 7, 2019, the order deadline for same-day shipment of LTL (freight) orders direct-shipped from Hubbell-Wiegmann in Freeburg, IL will temporarily change to 3:00 pm ET. The order deadline for same-day shipment of all other direct-shipped products, including small parcel orders from Hubbell-Wiegmann, will remain at 4:00 pm ET. We appreciate your patience as we work with our vendors to get this freight shipped order deadline restored to its original time.
AcuAMP Solid Core AC Current Transformers
AcuAMP® Solid Core current transformers are instrumentation grade (commercial class) and provide a very cost-effective means of measuring primary current. Two different window openings and two mounting styles along with numerous secondary ratios are available.
With primary current ranges up to 1000A, the transformers are compact, accurate, and ideal for applications such as monitoring motor run status, conveyors, heaters, and power.
With 1.56" and 2.50" diameter apertures available, the solid-core case is convenient for installation over large wires or bus bars. Panel mount versions available.
Secondary current is 5A; multiple connection options for 5A input devices provide compatibility with standard power monitors, data loggers and panel meters.
Solid core current transformers start at $15.75 and have a 2-year warranty.
Self-Adjusting Crimping Tool with Rotatable Crimp Die
The DN-FE-16T crimping tool has a rotatable die and a trapezoidal crimp profile. The crimper is self-adjusting for ferrule sizes of 26 to 8 AWG, and the crimp head is rotatable to accommodate crimping from the side or from the front.
Other than the rotatable die and crimp profile, this new crimper is identical to our two existing self-adjusting crimpers. These DN-FE series crimpers are lightweight, compact and comfortable for crimping a wide range of insulated and non-insulated ferrules, crimping terminals, and connectors. The crimpers feature controlled-cycle ratcheting mechanisms to guarantee a uniform crimp every time.
With ergonomic handles, the crimpers are well balanced to avoid slipping and have a non-slip grip pad for applying pressure against a surface.
DN-FE series crimp tools are $218.00 each and have a 1-year warranty.
SureStep High-Torque IP65 Rated Stepping Motors
SureStep® IP65 rated stepping motors are protected from total dust ingress and from low pressure
water jets, making them suitable for many washdown applications.
These fully sealed, single-shaft motors are available with industry-standard NEMA 17, 23, and 34 mounting flanges and provide holding torque from 61 to 1288 oz-in. The motors use 2-phase technology with 200 full steps per revolution or 1.8 degrees per full step.
The square frame step motor style produces high torque; waterproof white epoxy coating on the motor laminations and special bearings and seals keep moisture out.
IP65 Motors are available in single-shaft only and have a 1-ft. cable and locking connector. Extension cables with IP65 connector are available in 6, 10, 20 ft lengths.
Starting at $128.00, IP65 stepper motors are CE compliant and have a 1-year warranty.
SOLO Basic Single Loop Temperature Controllers
Economical SOLO® Basic temperature controllers provide single loop control for heating and cooling processes using a thermocouple or RTD input signal and a relay, voltage pulse, or current output signal (depending on model).
The 1/16 DIN panel size controller operates on 100 to 240 VAC 50 / 60 Hz input power. Two 4 character 7-segment LED displays indicate process value and setpoint (°F or °C selectable).
SOLO Basic units accept 11 types of thermocouples, 4 types of RTDs, and
support three control modes: PID, ON/OFF, and Manual. An Auto Tuning (AT) function is available with PID control.
On select models two alarm outputs are available.
These basic controllers are IP66 rated and have a 0°C to 50°C operating temperature range.
With UL, CUL, and CE agency approvals, SOLO basic temperature controllers start at $39.00.
ProSense Air Differential Pressure Gauges
ProSense® DGA series differential pressure gauges are used with air and compatible non-combustible gases to measure and display difference in pressure between two points. Applications include air/gas flow indication, filter monitoring, cabinet purging, and more.
These gauges have an industrial grade black die-cast aluminum case with two high pressure and two low pressure connection ports (1/8" female NPT), and a 4-inch (100 mm) white aluminum dial with black pressure markings.
Gauges are available for pressure ranges up to 150 inches water column (WC) and zero-center ranges from +/-1 to +/-15 inches WC with and 2% full scale accuracy. Gauges have a high temperature tolerance of -40°F to 140°F (-40°C to 60°C).
Priced at $46.00, ProSense differential gauges are IP67 rated and have a 5-year warranty.
Harsh Duty and Quadruple Sensing Distance Proximity Sensors
New Contrinex DW series 4mm, 5mm, 8mm and 12mm diameter round body inductive proximity sensors have been added.
Priced at $99.00 and intended for harsh duty applications, 4mm smooth and 5mm (M5 threaded) models are available with full stainless steel housings.
Starting at $75.00, 8mm and 12mm diameter DW series sensor models are now available with quadruple sensing ranges. The 8mm M8 sensor has a 4mm (shielded) sensing distance and the 12mm M12 sensor has an 8mm (shielded) sensing distance.
DW series proximity sensors have an LED status indicator and are available with NPN and PNP, Normally-Open or Normally-Closed outputs. DW series sensors are IP67 protection rated and provide complete overload protection.
All sensors are cULus approved, CE compliant and have a lifetime warranty.
IronHorse Larger 325 Frame Size Cast Iron Worm Gearboxes
Larger frame size 325 (3.25") IronHorse® cast iron worm gearboxes are now available in ratios of 10:1, 15:1, 20:1, 30:1, 40:1, & 60:1 with outputs in left hand shaft, right hand shaft, dual shaft, and hollow shaft. The 325 gearbox C-face interfaces match NEMA 56C, 145TC, and 182/4TC motor frame sizes.
Designed to change drive direction by 90 degrees, worm gearboxes are used when space is at a premium, such as for conveyors, or to simplify mechanical design. IronHorse gearboxes are mountable in any direction, except motor pointing up.
Cast iron worm gearbox prices start at $157; the full line is normally available for same-day shipping and is backed by a one-year warranty. Mounting bases are available for ease of installation.
NITRA Pneumatic Miniature Solenoid Valves & Manifolds
NITRA GVP series pneumatic miniature solenoid valves are an excellent choice for many automation applications with low flow requirements. These two- and three-port valves are typically used for on/off flow control or with single-acting cylinders.
Starting at $26.00, GVP series 12 or 24 VDC solenoid valves are available in 10mm and 15mm valve widths and in 2-way or 3-way normally closed configurations. Latching solenoid valves are available in 3-way normally closed configuration.
Used with GVP series valves, NITRA GM-3 series compact, precision machined anodized aluminum manifolds are available in single to 4 or 6 stations and start at $16.50.
Also newly available are compact and miniature manual air valves, general purpose shuttle and bleed valve fittings, brass air jet nozzle kits and non-metallic pneumatic manifolds.
RHINO PSV "Value Series" DC Power Supplies
RHINO PSV series DIN rail power supplies are available in a wide range of voltages and wattages. 5V RHINO supplies are available in 15 and 25-watt ratings, and 12V supplies at 48W. 24VDC supplies are available in 30, 50, 100, 120, 240, 480W; and 48V RHINO supplies are rated up to 120W.
15 to 100W models, in ultra-compact plastic housings, have an efficiency rating of up to 89.0%, a full power operating temperature range from -10°C to +55°C and are NEC Class 2 / Limited Power Source (LPS) certified.
120-480W power supply models have a metal housing, provide full power from -10°C to +50°C and efficiencies up to 88.0%. These models have a built-in constant current circuit for reactive loads.
Starting at $32.00, RHINO PSV series DC power supplies are UL/cUL recognized, CE approved and have a 3-year warranty.
22mm Pushbutton Ease-of-Use Legend Plates
New 22mm legend plates are available in both metal and plastic.
Some special purpose 22mm pushbutton legend plates require a locator notch to be filed off in order for the legend to fit over standard pushbuttons. With no filing required, these new legend plates offer ease-of-use with all 22mm pushbutton devices.
Plastic legend plates have white engraved text on a black or red background. Aluminum legend plates have a black or red field with silver background.
Two sizes of legend plates are available: 30mm W x 45mm H standard, and jumbo at 40mm W x 45mm H. Over 50 text legends are available in black and EMERG. STOP and STOP are also available in red. Blank plates are available in red and black.
These new 22mm legend plates are $3.50 each with O-ring included, and are CE approved and have a 1-year warranty.
5-Conductor Flexible Portable Cord
In addition to existing 2, 3 and 4-conductor styles, Type SOOW and Type SEOOW flexible cord are now available with 5 conductors in 16, 14, 12 and 10 AWG.
Flexible portable cord or service cord is used for electrical power connections requiring flexibility in indoor and outdoor wiring applications. Grounded Wye or 5-wire systems are required in applications such as power drops and supply power for mobile equipment.
Type SOOW and SEOOW cord are rated at 600 VAC and are available in 18 to 10 AWG. With a thermoset rubber jacket, Type SOOW is best for abrasion resistance and offers a lower cost. Type SEOOW has a thermoplastic elastomer jacket, a wider continuous temperature range and offers better flexibility at very low temperatures.
5-conductor flexible portable cord is cut-to-length starting at $0.82 per foot (20-foot minimum).
Compact size, easy-to-use CFW300 high-performance AC drives
The WEG CFW300 variable frequency drive is a high-performance VFD for three-phase induction motors. The CFW300 series features a compact size and is ideal for applications on machines or equipment that require precise control with easy setup and operation. WEG vector control or scalar control can be selected.
The CFW300 includes built-in operator interface and SoftPLC with free WEG Programming Suite (WPS) software for custom tailored control schemes. A variety of plug-in option modules for additional I/O and communications protocols can be added to extend capabilities. A remote keypad and flash memory module are also available.
Starting at $138.00, sixteen units are available from 1/4 hp to 5 hp. Single-phase 100-127 VAC, and single or three-phase 200-240 VAC power supply options are available.
PSH High Efficiency and PSX Ruggedized RHINO DC Power Supplies
High efficiency RHINO PSH series 12, 24 and 48 VDC power supplies offer efficiencies up to 94.5%, temperature performance range of -25°C to 70°C and agency approvals for extreme conditions. The DIN rail clips can be moved to the side of the power supply for side mounting in flat panels. With a 5-year warranty and starting at $83.00, PSH series supplies are UL 508 and hazardous location listed, UL 60950 recognized, ATEX certified, CE marked and RoHS compliant.
RHINO PSX series power supplies are Class I, Div. 2 hazardous location rated and offer 12 and 24 VDC output voltages, universal 120/240 VAC input voltage, adjustable DC output, DC-OK LED indication, and output current limitation. Priced from $259.00, PSX supplies are IP67 and NEMA 4X rated, UL 508 listed, UL 60950 recognized, CE marked and RoHS compliant.
IronHorse MTCP2 Premium-Efficiency Cast-Iron Three-Phase AC Motors
IronHorse MTCP2 industrial duty motors are offered in T-Frame (1 to 300 hp) and TC-Frame/C-Face (1 to 30 hp) and meet premium efficiency requirements. C-face kits are available for motors over 30hp.
These motors are available in 1200, 1800, & 3600 RPM and have TEFC (Totally Enclosed Fan Cooled) enclosures with cast iron frame and ribbed design for maximum cooling. The motors feature full-length, cast iron mounting feet, steel fan cover, and cast iron junction box with rubber gasket and rubber dust cover.
The motors are electrically reversible and have Class F winding insulation.
MTCP2-series motors start at $180.00, have a two-year warranty, and are CSA and CE approved. Available accessories include bases, junction boxes, fans and fan shrouds.
AttaBox Brand Corrosion-Resistant Fiberglass and Polycarbonate Enclosures
The AttaBox brand from Robroy Enclosures offers large selections of non-metallic polycarbonate, fiberglass-reinforced polyester, and polyvinyl chloride (PVC) enclosures in a wide range of applications at significant savings over alternatives such as stainless steel.
AttaBox models are available from AutomationDirect in pushbutton, window and clear cover, keylocking, fiberglass, and NEMA 1, 3, 3R, 3S, 4X, 6P, 12, 13 enclosure offerings.
AttaBox Freedom, Commander, Centurion, MachoBox, and Triton Series enclosures feature Robroy's SolarGuard® fiberglass-reinforced polyester formulation for maximum UV resistance in a corrosion-resistant non-metallic enclosure.
Same-day shipping on most AttaBox enclosures and accessories is available directly from the Robroy manufacturing facility in Belding, Michigan. Non-stock models can be shipped within 20 days.
MOSAIC Modular Safety Integrated Controller System
The ReeR MOSAIC safety controller system is modular, expandable and configurable for managing all safety functions of a single machine or an entire plant.
As a stand-alone, the master MOSAIC module has 8 inputs, 2 safety outputs, 2 status outputs and 2 inputs for Start/Stop interlock (RST) and external device monitoring (EDM).
By adding up to 14 expansion modules, the safety controller system can have up to 128 inputs, 16 safety outputs, 16 RST/EDM inputs, 32 status outputs, and EtherNet/IP or MODBUS TCP/IP connectivity.
MOSAIC reduces number of devices and wiring used, the size of the project and speeds up control panel construction. All logic is configured through a pictorial interface, and by lowering the number of electromechanical components, higher safety levels are achieved.
The master module is $299.00, expansion modules start at $112.00.
NITRA Hybrid PVC Hose for Air and Water
NITRA® Hybrid PVC Hose is a blend of PVC and rubber with a polyester braided reinforcement. The PVC gives light weight, color stability and hardness for higher working pressures while the rubber gives improved flexibility and operating temperature range.
The black with green stripe color hose works with air or water (non-potable) and is strong, flexible, kink resistant and has a Shore A 62 hardness rating.
The hybrid PVC hose is available in 1/4" and 3/8" hose inside diameters and is sold with or without 1/4 inch male NPT nickel-plated brass rigid fittings (additional fittings may be purchased separately). The hose is available in 25 and 50-foot hose lengths with fittings; and in 100, 250 and 500-foot bulk hose lengths without fittings.
Hybrid PVC hose prices start at $16.00 (25 ft. length with fittings). Replaceable nickel-plated brass fittings start at $4.75.
Motors, Encoders and Inertia Dampers added to SureStep Stepping Systems
SureStep® series high-torque industry-standard NEMA 14, 17, 23, and 34 stepper motors now provide holding torque from 8 to 1288 oz-in. The new smaller frame size NEMA 14 motors (1.4" wide) start at $22.00 and are available in single and dual shaft versions.
The SureStep family has options for open loop control (no encoder), position monitoring (external encoder feedback), and position verification (integrated motor/drives with internal encoder).
Replacement and optional encoders (starting at $42.00) are available for standalone dual-shaft motors and standard integrated motor/drives in all NEMA 14, 17, and 23 sizes; resolutions include 400 ppr and 1000 ppr fixed, along with new configurable models (48 to 4096 ppr).
New inertia dampers (starting at $13.00) smooth step oscillations and can be used as a hand wheel for motor rotation when power is removed.
Harsh Duty Sensors for Ferrous, Non-Ferrous and Weld Applications
KS series Factor 1 inductive proximity sensors, with stainless steel housing, have a correction factor K=1 and provide a constant sensing range without adjustment on all ferrous and non-ferrous metals alike.
WK series (Factor 1) sensors and WS series sensors have a coating that makes them ideal for welding applications where weld slag build-up is a large cause of sensor failure. The PTFE material coating prevents slag build-up and allows weld spatter to be wiped off easily.
These harsh duty sensors are available in 8, 12, 18 and 30mm diameter sizes and operate on 10 to 30 VDC input voltage. Sensing distances range from 2mm to 30mm depending on series.
All sensors are cULus approved, CE compliant and have a lifetime warranty. KS series Factor 1 sensors start at $24.00 and weld slag resistant coated sensors are priced from $27.00.
High-Speed Counting Features added to the CLICK stackable micro brick PLC
New features supported by CLICK Ethernet PLCs with DC inputs (Basic, Standard and Analog Ethernet CPUs) include up to 100 kHz high speed counting, and interval, duration and frequency measurements
Up, Down, Up/Down, Pulse/Direction and Quadrature (with Z) counting functions have been added and new measurement functions include interval (edge-edge), duration (high/low), and frequency (Hz/RPM).
A Preset Table is used to trigger outputs or call interrupt programs.
No new programming instructions are required; the high-speed counting configuration is done in a new Graphical User Interface GUI software display (which is part of the free programming software) and guides the user through the available functions, features and options.
CLICK Ethernet PLC units with the new high-speed counting functions start at $129.00 and have a 2-year warranty.
More I/O capabilities with the Productivity1000 Stackable Micro PLC
The Productivity1000 PLC provides communications, user-friendly programming, integrated data storage, and a full lineup of discrete, analog and specialty I/O modules in a super-compact size.
The micro-modular P1000 PLC system supports up to 8 I/O modules for a total of 128 discrete I/O or 48 analog I/O.
Newly added direct current P1000 modules include 16- and 15-pt VDC models, and 8- and 16-pt VAC/VDC input versions.
120-240 VAC, 8-point input and output modules have been added; and new analog I/O includes RTD 4-channel input and combination 4-channel input, 2-channel output, 0-20 mA and 0-10 VDC modules.
Starting at $33.50, I/O modules are auto-discovered and easily added / removed. There are no module placement restrictions and no power budget limitations. QR (Quick Response) codes are printed on each module for latest specs and wiring.
U-Frame, L-Frame and Harsh Duty Fork Sensors
Fork sensors (slot sensors) are U or L shaped through-beam object detecting sensors that have the transmitter and receiver built into the opposing "fork" arms of the sensor housing.
New PS series fork sensor additions include harsh duty U-frame sensors for food applications, L-frame or angled fork sensors for unique mounting situations, and fork sensors for liquid detection.
Depending on model, PS series fork sensors are available in visible red, infrared and laser lighting and in sensing ranges from 5mm to 220 mm.
Fork sensor advantages include ease of installation with only one connection point, and operational reliability and repeatability with transmitter and receiver built into the same housing.
Starting at $86.00, all PS series fork sensors are IEC IP67-rated, have cULus approval and are CE, RoHs and REACH compliant. Harsh duty sensors are also IP69k rated.
Graphical Panel Meters
Trumeter graphical panel meters measure voltage, current or frequency and provide analog meter-style visual and accurate numeric readings.
Measurement options include 0-600 AC or DC voltage, current at 0-5A direct or 0-9,999A via transducer, and frequency from 2 to 400 Hz. The panel meter provides two independent alarm outputs and two fully scaled analog monitor outputs.
The 40-segment programmable bar graph display has a four-character custom message/alarm area, a large 4-digit measurement display area and a starburst display area for annunciators and alarms.
The dynamic display backlight can be set for brightness and to flash or change color (red, green, white) at a specific measurement range. Two LCD options are available, positive LCD for bright conditions or negative LCD for dark environments.
Trumeter graphical panel meters start at $64.00.
Patlite LR4 Series 40mm Stacklight Tower Lights
LR4 Series Tower Lights have a modular "Twist and Lock" system that easily customizes and reconfigures LED modules and sound modules. Pre-assembled 2, 3 and 4 tier LED modules are available, and a fifth tier can be added.
LED modules are interchangeable and color sequences are changeable by adding or removing up to 5 color module choices even after installation, and with no tools needed. LED modules of the same color within a signal tower will light up simultaneously. Prism-cut lens design enhances LED visibility from any direction.
LED module colors correspond to color coordinated wiring so re-wiring is not necessary. An optional alarm module is available with adjustable volume and selectable sound patterns. The maximum sound volume is 85dB at 1 meter.
LR4 series tower lights start at $65.00 and are NEMA type 4X and 13 rated.
StrideLinx Cloud Notify License for Remote Alarms and Messages
The new StrideLinx Cloud Notify License is an add-on service that provides remote "alarm" emails and push notifications when control limits are exceeded on HMI / PLC devices connected to the StrideLinx VPN router. The service provides customized alarm names, priority level and instructions for each alarm, and customized alarm recipients.
This license is a one-time $210.00 purchase and a free 30-day trial is available.
StrideLinx provides secure, reliable access over the "industrial internet" to field devices for the remote visibility needed in today's connected world. Cloud connect any Ethernet-ready devices at a reasonable, low cost. Connect to multiple site locations all from one browser to monitor or troubleshoot multiple systems without requiring an on-site visit.
Thermal Overload Relays for Fuji Contactors
New Fuji TK26E Series Thermal Overload Relays for 9 to 25A contactors protect motor windings from burning due to overloads, locked rotor current, or open-phases. Maintenance and inspection safety has been improved by employing a finger protection mechanism to cover exposed terminals (conforms to DIN 57106) and the tripped status of the overload relay can be visually checked with ease. A high-precision scale for the current adjustment dial enables easy and exact current setting.
Isolated normally open and normally closed contacts can be used with different potentials. The relays can be manually tripped and a trip-free mechanism is also provided. Mounting base units (TZ1H26E) can be added to enable separate mounting of the relays.
Fuji TK26E overload relays are $25.00, have a 1-year warranty, and are UL and cUL listed and CE compliant.
Continuous Flexing Cut-to-Length Motor Supply Cables
igus Chainflex® continuous flexing CF30 and CF31 motor supply cables are specifically designed, tested, and manufactured to be exposed to constant flexing; providing a cable service life between 5 million and 10 million cycles.
The cables are available with 4 unshielded (CF30 series) or 4 shielded (CF31 series) conductors in 16 AWG to 2 AWG sizes. Individual conductors are bare copper and stranded for flexing applications. Conductor insulation is a black TPE mixture that is sunlight and oil resistant and flame retardant. Chainflex cables have a unique jacket tear strip that allows the outer jacket to be easily stripped back from the conductors to the desired length.
Starting at $1.41 per foot, cables are cut to length in one-foot increments (10 / 20-foot minimum with no cut charges). The price per foot is the same per cable type regardless of length ordered.
Multifunction Power Meters
DIRIS A Power Meters from Socomec are easy to install and use power measurement devices with extended functionality for measuring electrical values in low voltage networks. Socomec power meters offer solutions for industry, infrastructure and data centers and provide reduced costs, reduced production losses, improved efficiency and enhanced performance.
With a large backlit screen, these power meters display key power system values, and direct access keys (four to six depending on the model) are used to access functions required for energy efficiency projects and electrical distribution monitoring.
DIN-rail-mountable (A10) and panel mount (A20) multifunction meter versions are available, and all units are equipped with an integrated test function used to detect incorrect wiring.
Multifunction power meters start at $215.75 and have a 1-year warranty.
UL 1008 Rated Manual Transfer Disconnect Switches
Socomec SIRCOVER UL 1008 rated manual transfer switches provide safe transfer and are extremely durable and tested and approved for use in the most demanding applications, such as resistive load or total system applications. The switches provide reliable operation with a double breaking per pole sliding bar contacts system.
SIRCOVER manual transfer switches have three stable, completely isolated positions and feature 2, 3 and 4-pole configurations; 100A, 260A and 400A ratings, with 240VAC and 600VAC max operation voltage (AC) ratings.
Accessories include direct and external handles, external shafts, bridging bars, auxiliary contacts and terminal protection screens and lugs.
UL 1008 manual transfer switches start at $289.00 and have a 1-year warranty. These transfer switches are not to be used as motor disconnects.
SureStep Integrated Stepper Motors and Drives
Integrated stepper motors and drives save panel space, require less wiring and are less expensive.
The new SureStep® integrated drive/motor units provide accurate micro-stepping position, speed control and require only 2 components, power supply and integrated stepper motor/drive. Standard and Advanced motor/drives are available.
The advanced motor/drives can operate with traditional high-speed inputs, but can also be commanded via 0-5V analog input. An internal indexer can accomplish point-to-point moves controlled via ASCII communication.
Free SureMotion Pro drive configuration software is available for Advanced integrated motor/drives to easily configure and setup the drive, including drive, motion control mode, I/O, and motor. A Status Monitor screen aids in troubleshooting alarms and faults.
SureStep integrated motor/drives start at $97.00.
High Density 6mm Width Signal Conditioners
ProSense® SC6 Series signal conditioners are housed in a narrow 6mm width package that allows high density mounting on a 35mm DIN rail to optimize panel space.
Models are available for conversion of standard DC voltage and current signals, bipolar signals, thermocouples, and RTDs. Isolation eliminates ground loop problems.
The SC6 Series includes single channel, two channel and signal splitter models. Power options include an in-rail power bus, loop powered output, as well as models that are powered directly from the input signal.
These 6mm conditioners offer excellent accuracy and fast response, a wide operating temperature range and are suitable for high vibration environments.
All models are UL Listed as well as FM approved for use in Class 1 Division 2 hazardous locations.
6mm signal conditioners start at $69.00.
Enclosure Deep-Hinged HMI Window Doors
Universal deep-hinged doors offer a viewing window for clear visibility and are ideal for protecting HMI and keypad operator devices while allowing monitoring of these devices. These doors with polycarbonate windows are available in various sizes to fit compatible Hubbell-Wiegmann NEMA 3R, 4, 4X or 12 rated enclosures.
The viewing windows allow the operator to monitor the devices while the door is latched shut,
keeping them protected during operation. The doors have quarter-turn style latching for easy access,
concealed hinges with removable pins, and are fabricated from 14-gauge carbon steel with a light-textured gray finish or 14-gauge polished 304 stainless steel.
A drill template and mounting hardware is provided, and poured-in-place gaskets seal both the door and the mounting surface.
Universal deep-hinged window doors start at $358.00.
Pneumatic Pushbuttons combine valve bodies and electrical contact blocks
ECP series 22mm pneumatic pushbuttons and switches are used with EVP series valve bodies to create manual valve assemblies, or hybrid electro-pneumatic actuators. These operators allow mounting up to two 3-way valves, or one valve and one to three ECX series electrical contact blocks. The operators fit in a standard 22mm pushbutton hole.
Available pneumatic pushbutton operators start at $2.75 and include momentary flush & extended pushbuttons, mushroom pushbuttons (also key operated), double-headed pushbuttons, and knob selector and key selector switches.
The EVP series manual valves also function as pneumatic limit switches. These plunger valves are available in roller, one-way roller, thru panel and flush mounting versions. Starting at $16.00, the valves have 5/32-inch push-to-connect connections in axial or side port configurations.
More BRX Discrete and Analog I/O Expansion Modules
BRX I/O expansion modules add digital and analog I/O as needed to expand machine and process control applications. BRX expansion modules easily snap onto the side of any BRX Micro PLC Unit (MPU) or the new BRX remote I/O controller.
Three new 32-point BRX discrete I/O and five analog I/O expansion modules as well as three new BRX temperature input modules have been added. Three 4-channel analog input and two 4-channel analog output modules are now available with current and voltage signal options. Current signal ranges are 0-20 mA, 4-20 mA; voltage ranges are 0-5 VDC, 0-10 VDC, +/- 5 VDC, +/- 10 VDC. Max input and output signal resolution is 16-bits. Also added are 8-channel thermocouple input, 6-channel RTD input and 8-channel Thermistor input modules; all with 16-bit resolution. BRX analog I/O expansion modules start at $134.00.
Remote I/O for the BRX Micro PLC System
BRX Remote I/O controllers allow thousands of additional I/O to be added to your system. Each remote controller unit can be expanded with up to eight I/O expansion modules providing 256 I/O points per remote rack. Six controller versions are available and are designed to work seamlessly with Do-more! systems, DirectLOGIC ERM modules or any Modbus Client/Master device. Supported protocols include Do-more! Ethernet Remote I/O, HOST Ethernet Remote I/O, Modbus RTU and Modbus TCP. All units have a built-in 10/100 Mbps Ethernet port. Modbus I/O units also have an onboard RS-485 port with removable 3-pin connector.
Both 120-240 VAC and 12-24 VDC powered units are available; the AC powered units include an integral 24VDC auxiliary output power supply.
BRX remote I/O controllers start at $159.00.
StrideLinx Secure Remote Access Premium Branding License
The new StrideLinx Premium Branding License allows the creation of a custom company IoT platform with a user-specified domain name, the company logo on the login screen, and customized support and contact information. The Premium Branding license is $1,850.00 (one-time charge).
StrideLinx provides secure access over the "industrial internet" to remotely connect, monitor and troubleshoot multiple field devices.
The StrideLinx platform consists of three types of VPN routers and two antenna sets (Wifi and cellular). 5GB monthly data bandwidth is included free.
StrideLinx Cloud subscription options, including additional bandwidth (up to 50GB), cloud data logging, and the new Premium Branding license provide added services to StrideLinx remote access.
VFD Cut-to-Length Cable
VFD cable is used to organize and protect the input and motor
power wiring for variable frequency drives. It is specially designed using grounding, shielding & insulation to reduce VFD-related interference (EMI) on nearby equipment.
AutomationDirect VFD cables utilize cross-linked Polyethylene (XLPE) conductor insulation with Class K, flexible stranded tinned annealed copper conductors. XLPE insulation can withstand voltages as much as 3x higher than standard PVC/nylon insulation for VFD cables.
VFD cable is available with 4-conductors (including ground) in 16 AWG to 2 AWG sizes, and is 1000V rated for use with 460 volt drives.
VFD cable starts at $2.20 / ft. and is available in cut-to-length one-foot increments with minimum 10 to 20-foot lengths depending on wire size. There are no cut charges and no shipping charges (on orders over $49).
Fuji Electric AR30 Series 30mm Pilot Devices
Fuji Electric AR30 pilot devices include a selection of 30mm pushbuttons, non-illuminated as well as illuminated, with flush round heads, extended round heads, and mushroom style heads. Other 30mm pilot devices include emergency stop pushbuttons, selector switches, pilot lights, joysticks, and buzzers. AR30 pilot devices can be mounted on panels from 1 to 6mm thick in panel cutouts of 30.5 mm diameter. Fuji AR30 pilot devices provide quick snap-on replacement of contact blocks and can be wired in horizontal and vertical directions making wiring in narrow spaces easier. The AR30 devices include a terminal cover for added safety; available oil and dust-proof operator modules are IP65-rated. Fuji 30mm pilot devices start at $11.50, have a one-year warranty and are UL listed and CSA, CE/RoHS approved.
Cut to length multi-conductor cables in 1-foot increments
Bulk multi-conductor industrial automation cable is now available cut to length in one-foot increments from 20 to 5000 ft.
Cut-to-length cable eliminates waste and lowers cost (only as much cable as required is purchased). With a low minimum cut length of 20 feet, the price per foot per cable type is the same regardless of length ordered. There are no cut charges (and no shipping charges on orders over $49). Cable is cut to length at AutomationDirect's own UL Certified respooling facility and is available for same day shipping if ordered by 6:00pm ET.
Cut-to-length cable types include flexible portable cord, RS232/ RS422/ RS485 data cable, flexible control (tray) cable, instrumentation cable, continuous flexing control cable, and continuous flexing industrial Ethernet cable.
Cut-to-length cables start at $0.30 / ft. (20-foot minimum) with standard 30-day return policy.
WDP series definite purpose contactors
Definite purpose (DP) contactors are designed for application-specific use to provide compact load control that can handle lower locked rotor switching needs.
WDP series DP contactors provide compact load control in applications such as HVAC, compressors, pumps, resistive heating, power supplies, refrigeration equipment, food service equipment, motors, compressors and welding.
Starting at $7.25, these reliable control components are available in 1- or 3-phase configurations at coil voltages from 24 to 480VAC. Contactor current capacity is up to 60A with 1-, 2-, and 3-pole configurations at 25A, 30A, and 40A; and 3-pole configurations at 50A and 60A.
Terminal box lug connections each have quick connect/disconnect terminals; and optional auxiliary contact blocks mount on WDP series contactors to serve as secondary switches.
Mini Stopper and Stopper Bolt Precision Limit Switches
Mini stopper limit switches from Metrol incorporate a mechanical stop along with the limit switch function, eliminating the need for a separate stop in many applications. With 10 micron repeatability, long service life, and high contact force, these stainless steel switches are ideal for use in precision indexing/positioning applications.
Stopper bolt limit switches can take the place of a stop bolt and a separate switch for indication. Metrol stopper bolt precision limit switches incorporate a mechanical stop along with the limit switch function and provide 2 tasks with one device by housing a high-accuracy built-in switch in a stopper bolt.
These are designed to have the sensed parts come to a stop against them and not damage the switch.
Mini stopper limit switches start at $35.00 and stopper bolt limit switches are priced from $48.00. Both have a one-year warranty.
Limit Switches for Safety Applications from IDEM
Starting at $20.50, safety limit switches from IDEM provide positively operated switching contacts to verify the position of machine elements or other moving parts for safety related purposes. A wide range of housing types are available, and each offers a variety of actuation mechanisms, such as plungers, rollers and levers, all with precise operating points.
HLM series limit switches with heavy duty zinc aluminum die-cast bodies and LSPS series limit switches with standard duty plastic bodies have IP67 ratings and 1/2-inch NPT conduit fittings.
The HLM-SS series of heavy duty stainless steel limit switches has an IP69K rating (ideal for high temperature washdown) and 1/2-inch NPT fittings.
LSMM series (die-cast zinc aluminum body) and LSPM series (plastic body) are compact size switches with 2m pigtails and IP67 ratings (suitable for washdown).
STRIDE Serial / Ethernet Modbus Gateways
STRIDE® Modbus Gateways provide the bridge between Modbus RTU/ASCII (Serial) products and
Modbus TCP (Ethernet) products.
The gateway converts bidirectionally between Modbus RTU or Modbus ASCII protocols and Modbus TCP. The compact STRIDE gateway features 1 or 2 10/100 Mbps Ethernet ports and 1, 2, or 4 Industrial serial ports. The Ethernet ports each support up to 16 TCP devices, client or server.
Serial ports each support up to 128 slave devices or 1 master device and provide a high serial isolation voltage of 2kV. There is a DIP switch selectable termination resistor for the RS-485 mode.
STRIDE gateways, with compact metal housings, have a wide temperature range of -40 to +75 deg C and a Class 1 Div 2 Hazloc rating (UL61010).
The three models of the STRIDE MB Gateway are priced from $185.00 and have a 5-year warranty.
Failsafe Force Guided Relays
Force guided relays are electromechanical switching devices that offer safe operation via mechanically linked contacts to ensure that all contacts move at the same time, and prevent movement if any contact is immobilized.
Dold force guided relays have at least one NC contact set and one NO contact set.
Dold force guided relays are available with up to 6 poles in several NO/NC combinations with 5A contact rating, and provide a large wire cross-section (12-24 AWG) to reduce thermal load on wires.
Mounting options include 35mm DIN rail mount integrated relay modules or mounting socket with plug-in relay; the relays include diode protection and modules provide LED indication.
Force guided relays are priced from $12.00 and relay modules start at $29.00.
IronHorse Left Hand Shaft Cast Iron Worm Gearboxes
IronHorse cast iron worm gearboxes (worm gear speed reducers) are mechanical power transmission drive components that can drive a load at a reduced fixed ratio of the motor speed. The IronHorse worm gearbox line now includes left hand shaft models in four frame sizes, and six gear ratios from 5:1 to 60:1. Constructed of cast iron one-piece housings, the worm gearboxes feature a C-flange input. Designed to change drive direction by 90 degrees, worm gearboxes are used when space is at a premium, such as for conveyors, or to simplify mechanical design. IronHorse gearboxes are mountable in any direction, except motor pointing up. Prices start at $147; the full line is normally available for same-day shipping and is backed by a one-year warranty. Worm gear reducer mounting bases are also available for ease of installation.
Complete Stratus Vortex Cooler Assemblies
New Stratus® Vortex Cooler kits include everything needed to implement enclosure cooling. The kits include Stratus vortex cooler with distribution tube and muffler, a Stego adjustable thermostat, a NITRA pneumatic filter/regulator with NITRA 5-micron filter element and a NITRA 2-way 2-position solenoid valve. Stratus vortex cooler kits are priced at $349.00.
Stratus vortex coolers have cooling capacities from 500 to 2,500 BTUH; vortex cooler advantages include small physical size, cools without refrigerants (no CFCs, HCFCs), exceptionally reliable with no moving parts and vortex coolers are suitable for harsh environments. The all stainless steel Stratus vortex cooler mounts in a single 3/4" electrical conduit knockout, and relief valves and seals are built-in which enable the units to maintain the sealed nature of NEMA 4, NEMA 4X and NEMA 12 enclosures.
Igus Polymer Bearings and Hard-Anodized Aluminum Shafts
Available in 4 shaft diameters in fixed and self-aligning housings, igus® DryLin R series polymer bearings (from $6.00) provide a low-cost alternative to recirculating ball bearings and are suitable for wet or dirty environments.
igus igubal series mounted spherical bearings are lubrication and maintenance-free and are lighter and more economical than traditional mounted spherical bearings. Starting at $10.25, these bearings are available in 5 mounting configurations to fit 4 common shaft sizes.
igus iglide series plain sleeve and flange bearings (from $6.75) fit shafts from 1/4 to 1 inch and are economical, dry-running, maintenance free and an excellent choice for a wide range of motion applications.
Starting at $9.25, igus DryLin R series hard-anodized aluminum shafts in both round and fully-supported shafting are specifically designed for DryLin R linear polymer bearings.