The CFW100 is a single-phase input, three phase output variable frequency drive (VFD) developed for simple applications ranging from 1/4 to 1hp (0.18 to 0.75 kW).
The CFW100 series features compact size and includes a built-in operator interface (HMI) and SoftPLC with free WPS programming software. A variety of plug-in option modules can be added to extend capabilities.
WEG CFW100 series AC drive units
start at $139.00
WEG CFW3100 Series A-B-C Frame Sizes
WEG CFW100 Series AC Drives
WEG CFW300 variable frequency drives are high-performance VFDs for three-phase induction motors. They are ideal for applications on machines or equipment that require precise variable-speed control with easy setup and operation.
The CFW300 series features compact size and includes a built-in operator interface (HMI) and SoftPLC with free WPS programming software. A variety of plug-in option modules for additional I/O and communications protocols can be added to extend capabilities.
WEG CFW300 series AC drive units
start at $139.00
WEG CFW300 Series A & B Frame Sizes
WEG CFW300 Series AC Drives
GS1 prices start at $112.00 (GS1-10P2)Complete GS1 Series AC Drives Overview
The GS2 series of AC drives offers V/ Hz control with advanced application features.
GS2 AC Micro Drives prices start at $165.00 (GS2-10P2)
- Mounting plate adapter for mounting smaller-frame GS2 drives onto 35mm DIN rail. This DIN rail mounting adapter will fit all GS2 Series drives 2hp and below. The DIN rail adapter will also fit 3hp GS2 series drives that are 460V and 575V. Includes adapter, drive mounting screws, and installation instructions. RoHS compliant.
Testimonials for GS1-10P5
I bought this drive to fit in a small space. I wanted a low cost drive as this was a basic application. It was easy to install, easy to setup and had excellent reference material. Fast delivery. Would buy it again. Also, spoke with the technical team at AD and as always, they helped great!
I used this VFD to control a 3 phase motor that re-powered a power hack saw I refurbished. I like the options to have multi-speed selections via digital inputs. It is quite a versatile drive, and the price makes it super competitive. I also really like the capability to configure it via the Gsoft software, but even without that it is simple to set up. The manual is terrific. I would absolutely purchase it again!
Testimonials for GS1-22P0
These are probably the easiest drives out there to wire and program. We run them throughout the factory on everything from fans, to pumps, and have had a great success rate with no failures that come to mind. Absolutely the best value around.
Testimonials for GS2-22P0
Very easy to program even with no prior knowledge of drives.
Testimonials for GS2-43P0
I have bought close to 100 of these drives (different sizes)over the last 3 years with 0 failures. I have one project with 23 of them, all controlled with modbus, half of them are near constantly starting / stopping and speed changing to control the process, they are in a not so nice environment for 2 years, with no issues. I like these drives because they are simple and easy to use, and most of the time, half the cost of anything else on the market.