Drive configuration and programming software allows the user to connect to a VFD from a PC for fast, convenient setup and/or programming of a built-in PLC, and offline storage of (multiple) configuration parameters. Communication modules, cables, converters, wiring solutions, and cloud data logging options are also available.
GSoft2 is the configuration software for the AutomationDirect GS4 and GS20(X) family of drives. It is designed to allow you to connect a personal computer to drives and perform a variety of functions. GSoft2 includes an integral help file with software instructions. GSoft2 can be downloaded for free or purchased on USB from AutomationDirect.com
Purchase GSOFT2 software on USB card for
The GS4 and GS20(X) drives include a built-in PLC. Programmed in ladder logic, the PLC provides a comprehensive set of instructions and 2,000 (GS20(X)) or 10,000 (GS4) steps of programming capacity. GSLogic PLC software includes a Help File which contains the detailed information needed to use the PLC.
GSLogic is the drive PLC programming software for the AutomationDirect GS4 and GS20(X) family of drives. It is designed to enable you to perform a variety of drive PLC programming functions. Windows editing functions like cut, copy, paste, multiple windows, etc., are supported. GSLogic also provides for register editing, settings, file reading, saving, online monitoring settings, and other convenience functions.
GSLogic includes an integral help file that includes software instructions, how to use GSLogic, and how to use the GS drive PLC.
Purchase GSLogic software on USB card for
CFW-WPS - WEG Electric Windows configuration software, USB card or free download. For use with WEG CFW100 and CFW300 series AC drives. Requires PC USB port or USB-485M serial adapter. WEG CFW-WPS configuration software is available as a Free Download or for purchase on a USB card ($9.50).
One of the following Communications Modules is required in order to use the WPS Programming Suite software.
CFW100 communications modules start at $35.50
CFW300 communications modules start at $35.50
DURApulse GS20(X) series communication module, EtherNet/IP™ and Modbus TCP
GS20(X) Series communications module is
Communication interface cards provide EtherNet/IP™ or ModbusTCP communication capability. Only one communication card can be installed at a time. These Ethernet cards can be used for supervisory control of the drive or can be used for data acquisition.
GS4 Ethernet option cards start at
The ZIPLink system eliminates the normally tedious process of wiring terminal blocks.