This version of Internet Explorer is either no longer supported by Microsoft, or is obsolete and some features of our store may no longer be supported.
Please consider upgrading or use a different browser.
Rack mounting accessories allow installation of rack-style equipment in an enclosure. Rails, angles and channels allow a variety of stationary mounting options. Swing-out frames with hinges allow easy equipment access.
For part listings and detailed specifications, go to Shop Now for each category.
Floor Stands and Floor-Mounting Legs
Used to set a wall-mount style enclosure on the floor, or to elevate a freestanding enclosure. Kits include two
mounting feet and hardware kit.
Hammond Floor Stand Kit
Wiegmann Floor Stand Kits and Stabilizers
Saginaw Floor Stands
Skirt kits block access to area under enclosure.
Saginaw Skirt Kits
Plinths provide a mounting base and/or additional space for cable entry for modular enclosures.
Plinth kits for Quadritalia modular enclosures
Plinth plate sets and flanges for Quadritalia modular enclosures
Pedestals and Bases
Pedestals and bases provide floor mounting options for many types of enclosures.
Mounting Feet and Mounting Flanges
Field installable, includes mounting hardware for various enclosure brands.
For AttaBox Centurion, Commander and Freedom Series Enclosures
For AttaBox DuraShield Series Enclosures
For AttaBox Heartland Series Enclosures
Hammond Eclipse Series Mounting Feet
Hammond Polycarbonate Miniature Cases
For Hammond Polycarbonate Flanged Miniature Cases
For Wiegmann Enclosures
For Integra Enclosures
For Saginaw Enclosures
Flush Mounting Frames
Used to easily convert a wall-mount enclosure to a flush-mount.
Saginaw Flush Mounting Frames
Provide a space between the enclosure and the mounting surface.
Hammond Wall-Mount Standoffs
Pole Mounting Kits
Designed to mount outdoor rated enclosures of various brands.
Mount on enclosure for easy and safe lifting.
Saginaw Lifting Lugs
Quadritalia Lifting Lugs
Console tops that fit specific console models provide a surface to install control devices and instrumentation.
Console writing desks that fit specific console models provide operators with a writing work surface.
More drip shields from Hammond
Protects door from dripping water and settling dust.
Hammond Drip Shield Kit
Wiegmann Drip Shields
Saginaw Drip Shield
Quadritalia Drip Shields
Designed for flush mount installation requirements.
Doors for modular enclosures
For Freedom series enclosures, in various sizes, opaque style or with viewing window.
AttaBox Freedom Series
Quadritalia OKK Series
Provides protection and easy access to components and equipment installed inside an enclosure.
Extender rings designed for use with specific series of Hammond enclosures provide extra depth to Type 1 screw-cover junction boxes.
Keyhole-shaped mounting holes for quick assembly
Easy installation with provided hardware
Painted steel (ANSI 61 gray) and unpainted galvanized versions available
Hinges and Hinge Pins
Replacement hinge pins for certain brands of enclosures.
AttaBox Freedom Series
Hammond Eclipse Series
Filler plates are used with modular enclosure kits to fill the gap between subpanels or roof plates of two joined enclosure bays.
For Quadritalia modular enclosures
Easily installed by making cutout in enclosure and attaching window and frame in place.
The door switch can be used for switching a light when opening a door (NC), or to activate a fan when closing a door (NO). The version with singlepole double-throw contact (SPDT) can be used as a normally closed and/or normally open contact.
Enclosure Door Switch
Adapter Plates for Disconnect Enclosures
Used to adapt flange mounted operating mechanisms to enclosures.
Hammond Flange Disconnect Operator Adaptor Kits
Wiegmann Adapter Plates for Disconnect Enclosures
Saginaw Disconnect Cutout Cover Plate
Gland plate allows easy cable entry into enclosure.
Hole Seals & Plugs
Seal unused pushbutton holes, conduit openings and knockout holes.
Folding shelves for modular enclosures
Folding shelves for various enclosure brands.
Hammond Folding Shelves
Wiegmann Folding Shelves
Saginaw Folding Shelves
Quadritalia Folding Shelves
Grounding and Isolation
Ground lugs and wire are used to provide proper grounding for enclosures.
Hammond Ground Lugs
Hammond Grounding and Bonding Busbar
Hammond Rack Isolation Plate
Wiegmann Enclosure Grounding
Saginaw Grounding Bars and Straps
Locks & Latches
Latch handles for modular enclosures
Locks and latches provide a means to latch only or latch and lock an enclosure door.
Hammond Locks & Latches
Wiegmann Locks & Latches
Integra Replacement Quick-Release Latches
Saginaw Locks and Latches
Quadritalia Latch Handles
Interlocks & Defeaters
Electrical interlocks prevent the enclosure door from being opened.
Wiegmann Interlocks and Defeater
Saginaw Interlocks and Defeaters
Subpanels for modular enclosures
Subpanels provide a surface to install components without compromising NEMA ratings.
Available parts include standard, perforated, back, side, half-height and side-mount
panels in various materials and/or finishes, depending on brand and style.
Wiegmann standard, perforated, half-height and side-mount panels
Hammond standard, perforated, half-height and side-mount panels
Saginaw standard, perforated, half-height and side-mount panels
Attabox standard and variable-depth panels
Integra standard, side-mount and XXL panels
Quadritalia 1680mm and 1880mm panels for modular enclosures
Swing panel kits for modular enclosures
Swing panels allow mounting of operator components near the front of the enclosure for easy access.