Sapiselco self-extinguishing nylon cable ties quickly and economically secure cables/wires as a group or to a surface. Natural-colored mounting head ties provide an eyelet for easy mounting with a screw or rivet; marker ties have a built-in identification tag for permanent marking. Available in lengths up to 7 inches, all are sold in 100-packs.
For more than 65 years, Sapiselco® has been a leader in the manufacture of Cable Ties. Authentic SapiSelco products are easily identifiable by the SapiSelco diamond logo or the commercial code 2S, stamped beneath the head of each cable tie.
These standard Nylon 6.6 cable ties are slotted and held in place by the resistance of the elastic tooth against the rack. The tail of the strap is pulled through the head to form a noose that can only be tightened. Used to fix and seal. The work load is calculated using a safety coefficient of no less than 2. A preload of no higher than 10% of the work load should be applied. These cable ties are resistant to solvents and reagents, oil, gasoline, and hydrocarbons when used at low temperatures, in low concentrations, and for short periods of time.
Standard nylon cable ties start at
SEL.2.202 (100 pcs)
The same as standard Nylon ties, colored Nylon 6.6 cable ties are slotted and held in place by the resistance of the elastic tooth against the rack.
Colored nylon cable ties start at
SEL.10.202 (100 pcs)
The increased size of the hardened stainless steel tooth (with added Molybdenum) ensures extremely high mechanical strength and optimal resistance to corrosion. The classic rack has been replaced by a single central raised section, making the MET tie particularly flexible, while guaranteeing maximum strength at the same time. The special design of the MET cable tie enables smoother insertion of the steel tooth, reducing the required insertion force.
Stainless steel tooth ties start at
MET.2.2102R (100 pcs)
Exposure to sun and ultraviolet rays causes deterioration in nylon. Our specialty Nylon UV Resistant cable ties can resist and endure the harsh conditions of outdoor applications for up to 10 years.
SEL.UVV2.210 (100 pcs)
These ties are produced with a special 6.6 polyamide with metal powder additive and are sensitive to electromagnetic fields. They are recommended in the food, pharmaceutical and chemical industry.
DET.11.2102 (100 pcs)
These ties have a tongue for temporary cabling/fixing applications, enabling the tie to be reused.
RIA.2.232 (100 pcs)
This nylon PA 6.6 wiring cable tie has a link above the head for inserting the left over tail which, after installation, does not need to be cut, thereby making installation faster.
ASO.3.251 (50 pcs)
The eyelet tie is designed to tie cable bundles onto even sharp-edged supports, by rivets or screws (not included) inserted through the eyelet.
OCH.2.2123 (100 pcs)
Nylon cable ties with built-in identification tag.
Double-headed locking cable ties offer more secure fastening. Made from a softer thermoplastic, these ties are more flexible than standard cable ties. Because these ties are difficult to fasten by hand, we recommend utilizing PIN.005 collar fastening plier.
COL.3.321 (100 pcs)
Bi-directional Nylon Square Bases
Cable Tie Cutting Tool
Collar Fastening Metal Plier
Cable Tie Gun Installation Tool