These units have all the capabilities of the Full Feature Models below AND huge high resolution screens AND 82MB of project memory AND a second SD card slot AND an HDMI video out port.
These Full Feature Models are NEMA 4/4X (IP65) and include full color TFT screens with LED backlight; 800MHz CPUs; 1 Ethernet, 3 serial, and 2 USB ports; and an SD card slot.
Offering exceptional value, the Base Models have most of the capabilities of the Full Feature Models above
The "one click" built-in simulator is one of C-more's most powerful features. You will find yourself using this feature every couple of minutes while developing your project. Use of this intuitive simulator will result in a better looking, more effective project AND reduce your development time.
Fully simulate your entire project (every object, every screen) while it is being developed, without being connected to a touch panel or PLC/PAC. Simply click on the "Simulate Project" button at any stage of project development. A window will appear over your development screen that contains a pixel-for-pixel representation of how your project will appear on your physical C-more panel. A second window will also appear with all the relevant Tag Names listed for that screen.
Now the fun begins. Simply click your mouse on any simulated screen object and it will behave as if your finger is actually touching a C-more panel. And the corresponding bit or data value will change on the tag list screen.
Want to see how an analog meter moves based on dynamic data from the PLC/PAC? Simply change the data value on the tag list screen and watch your meter move on the simulation screen.
And here's the really cool thing - whatever values you modify during simulation, the effect will be propagated throughout your entire project, object by object, screen by screen. This is a true "project simulator".
One last click ends the simulation, and you are back to project development. You can go back and forth in a flash. It's that easy!