Javascript is not enabled on your browser.
Javascript is required for many of our site's features to work properly. Please enable javascript in your browser preferences to continue.

Shopping Categories

Learn More

In Depth Product Sites

Product Selectors &
Configuration Utilities

> Wiring Solutions > Electrical Conduit > Non-metallic Two-piece Split Conduit

Non-metallic Two-piece Split Conduit

Non-metallic two-piece split conduit provides easy installation of terminated cables/wires where using a standard conduit would be difficult. The overlapping design prevents accidental wire exposure and adds mechanical protection. This conduit is available in various diameters and coil lengths.

Non-metallic Conduit

Metallic Conduit

Non-metallic Two-piece Split Conduit

Conduit Connectors

Shop Now

Electrical Conduit

Liquid-tight electrical conduit provides a routing channel for electrical wires and excellent protection from abrasion, sunlight, mild acids, alkaline, and oils. Split conduit allows for easy routing and installation of pre-terminated cables, provides moderate crush resistance, and is ideal for cobots, gantry systems, and retrofitting applications.

Electri-Flex Liquatite flexible conduit is especially useful when complete moisture protection is required and when installation requires several bends and turns. Liquid-tight flexible non-metallic and metallic conduit is available; also available are shielded models, and models specifically designed for extremely hot or cold environments.
Murrplastik non-metallic two-piece split conduit provides a simple solution when the job involves routing pre-terminated cables. With a continuous seam, the conduit can be opened and easily installed around the cable, eliminating the need to disassemble/reassemble the connectors.

For part listings and specifications, go to Shop Now

Non-metallic Liquid-tight Conduit

Electri-Flex Type NM flexible conduit provides excellent wire protection with a helically wound integral construction containing a spiral of rigid PVC reinforcement embedded within the wall.

For containment of 1000V and lower potential circuits
Listed and marked for outdoor use, direct burial, and in poured concrete
Suitable for use with standard metal liquid-tight fittings or non-metallic fittings

Starting at
$71.00 / 50ft. coil
(NM-11-50)

Metallic Liquid-tight Conduit

Electri-Flex Type LA flexible conduit offers outstanding protection against wet or oily conditions in exposed or concealed locations.

Electri-Flex Type ATLA is designed specifically for extreme environments. This conduit remains flexible at low temperatures, is flame retardant, and resists aging at elevated temperatures.

For containment of 1000V and lower potential circuits
Flexible inner core is made from a spiral-wound strip of corrosion-resistant, hot-dipped galvanized steel
Listed and marked for direct burial and in poured concrete

Electri-Flex Type SLA flexible shielded conduit is designed for wiring applications requiring protection of sensitive electronic circuits from electromagnetic and radio frequency interference.

Ideal for use with test and measurement equipment, data centers, radio / broadband antennas, medical diagnostics equipment, and wireless communications

Starting at
$56.00 / 25ft. coil
(LA-10-25)

Non-metallic Two-piece Split Conduit

New!

Murrplastik EWT-PA series split conduit is perfect for working with terminated cabling, wires, and retrofitting applications. Formed by two separate corrugated tubes, one inside the other, this conduit can be opened and reassembled at any time for easy cable insertion. The dual-tube construction provides increased mechanical protection and eliminates unintentional exposure of the cabling bundle inside.

Specially modified black polyamide construction
Simplifies addition, removal, or repairs of cables
High crush resistance, per IEC EN 61386:>900N
Sold in various diameter sizes in coils of 32 or 82 ft.

Starting at
$57.00 / 32ft. coil
(831000)

Conduit Connectors

RACO liquid-tight metallic connectors are used to positively bond the conduit to a box or enclosure. These connectors are made to fit flexible metallic and non-metallic liquid-tight conduit and can be used in hazardous locations.

Seven trade sizes: 3/8-inch to 2-inch (straight and 90-degree)
Patented split gland-ring grips the jacket of the conduit, assuring a perfect seal and preventing pullouts
Easy to disassemble and reuse
All steel / iron components are zinc-electroplated for added corrosion protection

Murrplastik split conduit connectors and accessories specifically made for Murrplastik split conduit, provide efficient and quick installations. All connectors consist of two sections that snap together with slight force and can be easily undone if needed without destroying the connector.

Bulkhead connectors with 90-degree connections
Straight and pass-through connectors
Couplings
Conduit clamps and holders
End sleeves
KE series wire insertion tool for easy wire installation

Starting at
$2.25
(3401-8)

Shop Now

Recent Orders

Your Account

Electrical Conduit

Non-metallic Liquid-tight Conduit

Metallic Liquid-tight Conduit

Non-metallic Two-piece Split Conduit

Conduit Connectors

Recent Orders

Your Account

Selection Assistance - {{ assistanceData.title }}

Electrical Conduit

Non-metallic Liquid-tight Conduit

Metallic Liquid-tight Conduit

Non-metallic Two-piece Split Conduit

Conduit Connectors

Company Information