Check out the list of all tutorial videos on the C-More Micro HMI at this link: https://c-moremicro.automationdirect.com/support/video.html
You can change the project to be in a portrait or landscape mode so the C-More Micro can be used in either a horizontal or vertical orientation. Just go to the Panel Manager from either the Navigation Menus FUNCTION Tab – Panel Manger, OR from the Setup Menu, Panel Manger. To change the orientation, just click the mode you prefer. Note: This feature is only available on the 4 inch and 6 inch C-more micro panels, - it is not available on the 3 inch models. If you choose a 3” panel, the option will be dimmed out. We’re currently in landscape mode, so let’s change this panel to portrait and see what happens. When you hit OK, you will have two choices: You can leave it at the original resolution or you can have the software try and adjust the objects to fit the new screen orientation. Let’s display at original size and see what happens. We have a problem here – the panel is too narrow for the object layout that we have. Let’s bring it back to Landscape and leave the objects as they were. This time when we leave landscape and go to portrait, let’s have the software automatically adjust the object to fit on the new screen. As you can see, the software automatically adjusted everything to fit the new orientation. Of course there’s always a few adjustments that need … That’s about it for changing the panel orientation – be sure to check out the other videos in this series. And as always, please send us any topics you would like to see covered – or - any other comments for that matter – we appreciate the feedback!