NITRA™ Pneumatic Polyurethane (PUR) Tubing is made from the highest quality, 100% virgin raw materials available and has a hardness specification of Shore A 98. It is also sometimes referred to as poly tubing.
Our FREE Practical Guide to Pneumatics eBook:
[music] >>Shane Crider: Welcome to KickStart, where you get to see new products from AutomationDirect. What we’re going to talk about today is our NITRA line of pneumatic tubing. Now, AutomationDirect has been carrying tubing, and push-to-connect fittings for quite some time. What we’re going to do is extend these product lines into three new categories, and I’ll talk about each category separately. If you’re not familiar, pneumatic tubing is cut to fit per application, and to connect it you use a push-to-connect fitting. Like I said, AutomationDirect does carry these push-to-connect fittings. Take a look at them on the website. First off, we have our straight tubing. Now, what we’ve got is some new colors, and these in our polyurethane you can get a red, a yellow, or a clear blue. Now, in our nylon style you can get a red or a yellow color. That’s in our straight tubing. They come in sizes anywhere from a 5/32nds or four-millimeters up to a twelve- millimeter diameter. Now, these are all sold in one hundred foot packs, or a five hundred foot reel. There are eighty new part numbers with the straight tubing. Next, what we have is our bonded tubing. You can get this in a two or a three style bonded tube. On the two style, it comes in a black or a clear blue as seen here. On the three style you get black, clear blue and a standard blue. Now the size is the same – 5/32nds or four-millimeters up to a twelve-millimeter diameter. Now, these only come in fifty-foot packs. And there’s sixteen new part numbers with these. Last but not least, is our coil tubing. You can get these in single style or get them bonded with a two bond or a three bond. Now, these come in 5/32nds or four-millimeters up to ten-millimeters. And instead of lengths on these, they come in coils so you can get it in a ten, a twenty, or a forty-coil configuration. And there’s a total of fifty-four part numbers on these. Now, with any of our tubing here at AutomationDirect they all carry a one-year warranty. So take a look at them – you’ll find them at automationdirect.com. Look under the NITRA Pneumatics. Thanks for watching and we hope to see you at the next video. [music] [music]