Welcome to Kickstart where you get to see new products here at AutomationDirect. Today I am going to show you our new analog modules for our CLICK PLC. We are now offering 8 new analog IO modules with 4 input modules, 2 output modules and 2 combo modules. These new CLICK analog modules include: a 4 channel input module with 0 to 20 milli amp, a 4 channel input module with 0 to 10v, a 4 channel input module with RTD sensor or resistive inputs and a 4 channel thermocouple or voltage input. The output modules are a 4 channel output with 4 to 20 milli amp source and a 4 channel output with 0 to 10v. The two new combo modules are 4 channel input with 0 to 20 milli amp and 2 channel output with 4 to 20 milli amp source. The last is a combo with 4 channel input with 0 to 10v and 2 channel output with 0 to 10 v. There are no jumper switches on these modules, and setup is easily configured with the easy-to-use programming software, available as a free download or for purchase on CD for $10. You can find the agency approvals and specs for these new CLICK analog modules on our website at: www.automationdirect.com Don't forget: we have over 2 dozen power packed I/O modules for the CLICK PLC. If you haven't tried the CLICK PLC, pick one up and give a try, you won't be disappointed. Check back with us often on AutomationDirects websites or on Youtube.com/Automationdirect for more Kickstart videos. If you are watching us on YouTube, please let us know what you think about these new CLICK Analog modules or how you plan to use them in your application by dropping us a comment down below. Thanks for watching and we hope to see you again soon.