In this video, we demonstrate in under two minutes how to add, remove or replace a module from the NITRA CMV valve product line.
Our FREE Practical Guide to Pneumatics eBook: https://go.pardot.com/l/548202/2018-08-06/7mysll
In this video we will show you how to assemble and disassemble AutomationDirect NITRA CMV Valve components. We are going to show you in under two minutes how quick and easy it is to assemble your NITRA CMV Valves, end plates and intermediate plates. When preparing to assemble the system, start on the left side end plate and stack each module to the right of the last as shown. Each module requires a two-point five-millimeter Allen wrench to tighten the set screws on both front and back of the modules. If additional set screws are required, AutomationDirect offers these. The right side of each module with the exception of the end right plates will have a pneumatic gasket and an O-ring. When assembling modules, be careful not to damage the pneumatic gasket and O-ring. If either the gaskets or O-rings are damaged, replacements can be purchased. Confirm that the O-ring is in place in the channel. The channel has small tabs to help keep the O-ring positioned. Once the modules are properly positioned, simply tighten the set screws on front and back. Modules in a system can be added, removed, and or replaced with ease. First, remove power, air supply and/or vacuum for safety. Next, simply loosen the front and back set screws on the module to be removed and the module to the right. Pull the modules apart being careful not to damage the gaskets and O-rings. Next, add, remove or replace a module. Slide the modules together and tighten the set screws. Thank you for watching and be sure to check out all of the other pneumatic Products that AutomationDirect offers. If you have any questions about using AutomationDirect's pneumatic products, please contact AutomationDirect's free award-winning support team during regular business hours. They will be happy to help. Click on this short video to learn more about AutomationDirect's support options and click here to learn more or see more videos on our pneumatic products. And be sure to click here to subscribe to our YouTube channel to be notified of new Videos. Don't forget to hit the like button below!