Cord Grips: Strain Reliefs, Drop Support Grips & Pull Grips KickStart
(VID-WD-0006)
from AutomationDirect.
Bryant® Wire Management Products
Wire and Cable Strain Relief Grips.
Strain Reliefs are used to connect cable enclosures and industrial equipment. These strain relief cord grips prevent cable pullout at the point of termination due to tension, vibration, flexure or motion. Used in conjunction with bus drop support grips and safety springs, strain reliefs are an integral part of an overall cord support and strain relief system.
Support Grips are applied to the vertical or horizontal runs of cable or service lines to support dead weight and reduce potential damage due to breakage or stress.
Pull Grips / Cable Pullers are designed to serve as reusable tools for light industrial pulling of electrical cable and for underground and industrial plant wiring and re-wiring.
Check out all of our videos at https://www.AutomationDirect.com/Videos
To subscribe: https://www.youtube.com/user/automationdirect?sub_confirmation=1
Facebook: https://www.facebook.com/AutomationDirect
Twitter: https://twitter.com/AutomationDirec
LinkedIn: https://www.linkedin.com/company/automationdirect
**Prices were valid at the time the video was released and are subject to change.
Welcome to Kickstart where you get to see new products here at AutomationDirect. Today I am going to show you our new Cord Strain Relief Grips from Bryant. We now offer 21 different Strain relief grips. These strain relief grips offer high strength, positive gripping, fast installation, no special tools, no cable stripping, they have slim profiles are long lasting and reusable as well. The deluxe cord strain relief grips are available for cable diameters of .187 inch up to 1.687 inch. These are suitable for Indoor and outdoor applications, made of stainless steel mesh, are corrosion resistance and are available in liquid and dust tight styles. The dust tight strain relief grips are available for cable diameters of .32 inch up to 1.7 inch. These are dust tight, galvanized steel mesh, ideal for use in bus drop systems, motor connections, panel boards and internal wiring of machines. Support Grips are applied to vertical or horizontal runs or service lines to support dead weight and reduce potential damage due to breakage or stress. These are available in Standard duty support grips: from .54 inch up to 1.74 inch for indoor and outdoor applications and Bus Drop support grips from .24 inch up to 1.25 inches and there are 15 new parts in this category. Last up are ten new pulling grips available in light duty and junior ranges. They are designed to serve as reusable tools for light industrial pulling of electrical cable and wiring. Ideal for use in utility work, industrial and commercial building service lines and underground transmission line stringing. They can be easily installed, they are reusable, simple construction and light weight and the slim profiles allow for easy passage through ducts, conduit, blocks and sheaves. They offer ranges from .25 inch up to 1.74-inch cables. You can find the agency approvals and specs for these Bryant strain relief cord grips on our website at automationdirect.com forget: we sell other cord and cable accessories as well as the cords and cables themselves. Check back with us often on AutomationDirects websites or on Youtube.com/Automationdirect for more Kickstart videos. If you are watching us on YouTube, please let us know what you think about the products or how you plan to use them in your application by leaving us a comment down below. Thanks for watching and we hope to see you again soon.
Safe &
Secure
We accept VISA, MasterCard, Discover, American Express, PayPal or company purchase orders.
Updating...