Welcome to Kickstart where you get to see new products here at AutomationDirect. Today I am going to show you our new Solenoid Valve Cables and Valve Connectors from MURR Electronik. There are 43 PNs with these new cables and connectors. They are square DIN style connectors that reduce wiring time when setting up your pneumatic application. These will fit most popular solenoid valves and sensors. We offer these in 24v, 110v and 230V ac/dc models. They come in Over Molded and Field wire-able styles. These cable connectors offer LED and Suppression in the 24v, and 110v ac/dc models. The Over molded cables are IP67 rated and the field wire-able cables are IP65. They come in several styles and sizes like: Form A, B, BI, C and CI. And the cables are PVC jacketed and come in 1, 3 and 5 meter lengths. One of the cool features of these is that the connector can be positioned in different directions. If you will zoom in, I will demonstrate. Lets say my existing setup would have my cable wires headed towards the middle of the solenoid valve which will work, but would be in the way. Here, I can remove the insert, rotate it and re-assemble and now my cable wire can be heading away from my solenoid valve. You can find the agency approvals and specs for these new Solenoid valve cables and connectors on our website at : www.automationdirect.com Don’t forget: we sell solenoids and other cables as well. Check back with us often on AutomationDirects websites or on Youtube.com/Automationdirect for more Kickstart videos. If you are watching us on YouTube, please let us know what you think about the products or how you plan to use them in your application by leaving us a comment down below. Thanks for watching and we hope to see you again soon.