This video details the steps in uploading and also downloading the configuration for the Stride SE2 series Managed Industrial Ethernet Switches.
First you will need to get connected to switch by entering the IP address of the switch into your web browser. You will then be asked to enter the user name and password for the switch. Now Expand the Device management and then select Configuration Upload and Download. First we will upload the configuration from our switch to our PC. Notice that this file saved as the name “config” to your default save location. Now let’s take that same file and download to our switch by first selecting choose file, then navigating to the file location, selecting the file. Now you will see your file name here. Then press Download To Switch Press Ok Once the configuration is loaded you will see this message. Select reboot the switch from device management, and you are done. If you need any help with using an Automation Direct device please contact Automation Direct’s free, award winning Technical support team during regular business hours – they will be happy to help. And don’t forget the forums. There are lots of folks there that love to share their years of experience. Just don’t post questions directed at Automation Direct’s Technical support staff there, they do not monitor the forums on a regular basis.