NITRA Pneumatic Heavy Duty NFPA Tie Rod Cylinders
NFPA cylinder bore Sizes: 1-1/2", 2", 2-1/2", 3-1/4", 4"
Air cylinder stroke lengths from 1" to 24"
Flange, pivot and clevis cylinder mount options available
The NITRA D-Series tie rod cylinders include bore sizes from 1-1/2" to 4" and stroke lengths from 1" to 24" to meet a broad range of applications where abusive conditions exist.
These heavy duty cylinders are constructed with high quality aluminum components and a magnetic piston fitted with a PTFE Wear Band.
The air cylinders are fitted with a Teflon® impregnated and hardcoat anodized heavy-duty external rod bearing. This bearing ensures smooth rod motion while maintaining rod rigidity and stability. The entire rod gland and bearing may be quickly removed and replaced without disassembling the pneumatic cylinder.
All D-Series NFPA cylinders have a magnetic piston that can be used along with solid state or reed switches for rod position sensing.
The solid state and reed switches sense the rod position by emitting an electrical signal when the magnetized piston reaches a point adjacent to their location.
Tie rod mounting allows fast and accurate positioning setup.
Our FREE Practical Guide to Pneumatics eBook:
Welcome to Kickstart where you get to see new products here at AutomationDirect. Today I am going to show AutomationDirects brand of NITRA NFPA pneumatic cylinders. If you are not familiar with NFPA it stands for National Fluid Power Association and NFPA cylinders all follow the same standards meaning that they are interchangeable regardless of the manufacture. We have 109 new parts with these new NFPA cylinders, and they are available in one and a half, two, two and a half, three and a quarter and four inch bore sizes and come in stroke lengths from one inch up to twenty four inch lengths long. These are NFPA dimensionally interchangeable, double acting, have a magnetic ring on the piston for sensing, tapped end plates and one side for mounting, numerous mounting components for a variety of configurations and they are rebuild able. Best of all… they are made here in the United States. You can find the agency approvals and specs for this Nitra line of NFPA pneumatic cylinders on our website at: www.automationdirect.com Don’t forget: we sell other styles of pneumatic cylinders as well as position switches, solenoid valves, fittings, tubing and more. Check back with us often on AutomationDirects websites or on Youtube.com/Automationdirect for more Kickstart videos. If you are watching us on YouTube, please let us know what you think about the products or how you plan to use them in your application by leaving us a comment down below. Thanks for watching and we hope to see you again soon.
Voted #1 mid-sized employer in Atlanta
Check out our job openings