- Barcode / RFID / Vision
- Bulk Wire & Cable
- Cables (Terminated)
- Circuit Protection / Fuses / Disconnects
- Communications
- Drives & Soft Starters
- Enclosure Thermal Management & Lights
- Enclosures & Racks
- Field I/O
- HMI (Human Machine Interface)
- Hydraulic Components
- Motion Control
- Motor Controls
- Motors
- Pneumatic Components
- Power Products (Electrical)
- Power Transmission (Mechanical)
- Process Control & Measurement
- Programmable Controllers
- Pushbuttons / Switches / Indicators
- Relays / Timers
- Safety
- Sensors / Encoders
- Stacklights
- Structural Frames / Rails
- Tools & Test Equipment
- Valves
- Water (Potable) Components
- Wire & Cable Management
- Wire & Cable Termination
- Retired Products
Configuration Utilities
- PLC Family Selector
- P1000 PLC Systems
- P2000 PLC Systems
- P3000 PLC Systems
- ProductivityCODESYS
- CLICK PLC Systems
- Do-more® BRX PLC Systems
- LS-Electric® XGB PLC Systems
- Productivity®Open Systems
- Datalogic® Safety Light Curtains
- LS-Electric® Servo Systems
- Nitra® Pneumatic Grippers
- Object Detection (Sensors)
- PAL Controller Configurator
- Precision Gearbox Selector
- Protos X® Field I/O
- Pyrometers Selector
- Quadritalia® Modular Enclosures
- Soft Starters
- Stepper System Selector
- SureFrame T-slot Extrusion
- SureMotion® XYZ Gantry
- SureServo2® System Selector
- SureStep® Linear Actuators
- Timing Belts & Pulleys
- Werma® Stacklights
- ZIPLinks
Precision Gearboxes for Servomotors
Use our selector tool to configure and order.
Precision gearboxes for servomotors are mechanical power transmission components that increase output torque at a reduced ratio of servo motor speed.
This page will refresh momentarily.
Warning
Some of the selected facets have been selected by the {{ assistanceData.title }} Help.
Resetting/clearing ALL facets will end {{ assistanceData.title }} Help.
![Help icon]()
Selection Assistance - {{ assistanceData.title }}
Gearboxes mate directly to servo motors
Click picture to start SureGear Gearboxes Video
- PGA Inline Series
- MSS Inline Series
- PGB Right Angle Series
- PGD Hub Style Inline Series
Precision Gearboxes Features
- Thread-in mounting style
- Best-in-class backlash
- Gear ratios available: 5:1, 10:1, 15:1, 20:1, 25:1, 35:1 and 50:1
- Mounting hardware is included for attaching to Servo motors
- Helical-cut planetary gears for quiet operation and reduced vibration
- Right-angle design allows motor to be positioned at 90 degrees to the reducer, providing a more compact footprint
- Uncaged needle roller bearings for high rigidity and torque
- Adapter bushing connection for simple and effective attachment to most servo motors
- High-viscosity, anti-separation grease does not migrate away from the gears; no leakage through the seal
- Maintenance free: no need to replace the grease for the life of the unit
- At nominal speed, service life is 20,000 hours
- Can be positioned in any or ientation
- IP65 environmental rating
- 5-year warranty on SureGear®, 2 year warranty on LS-Electric models
Applications
- Gantries
- Injection-molding machines
- Pick-and-place automation
- Linear slides
- Packaging machines
- Conveyors
Planetary Gear - The Optimal Servo Gear System
Planetary Gear Advantages:
- High Torque Density
- High Stiffness / Low lost motion
- High efficiency
- Balanced System
- Suitable for very high speeds
- "Self-distributed" Lubrication
Servomotor with Gearbox:
- Reduced load inertia
- Boosted torque
- Lower motor torque required
- Smaller motor, lower current rating, less costly driver
- A more compact and economical solution
For part listing and specifications, go to Shop Now
Inline Precision Servo Gearboxes
Right-Angle Precision Servo Gearboxes
The SureGear PGB series of high-precision right angle servo gear reducers is an excellent choice for applications that require a more compact footprint.
- The PGB right-angle planetary gear reducers offer similar technical specifications to the PGA series inline gear reducers, and provides the customer with an excellent solution when space and clearance requirements are limited.
- Offered with a six arc-min backlash rating for 2-stage and nine arc-min backlash for 3-stage, the SureGear PGB series performs to OEMs' demanding expectations.
SureGear right-angle series gearboxes start at
(PGB070-05A1)
Inline Precision Servo Gearboxes with Hub Style Output
The SureGear PGD series sets a new standard in applications requiring extremely high-torque ratings and rigidity.
- The compact design and hub style output is ideal for equipment that requires high-speed, high-precision indexing movement.
- The remarkable torsion stiffness and the low backlash of the planetary gearing combine to provide outstanding positioning accuracy.
- With a backlash rating less than 3 arc-minutes and exceptional torque handling capabilities, the PGD series offers a high performance robust planetary solution for OEM customers.
- The PGD reducer is often used for larger indexing applications and dial tables commonly found in packaging and filling equipment and assembly automation systems.
Starting at
(PGD047-05A1)
