Tubing accessories include tubing cutters and thread sealing tape. Clean/perpendicular cuts are critical for preventing leaks at push-connect fittings. Knives and wire cutters can cut at an angle or even crush tubing; use a tubing cutter for fast, accurate cuts. Use Teflon tape to seal threaded connections when the fittings do not have pre-applied sealant.
Tube Cutters, Sealant Tape, Pneumatic Manifolds
NITRA tubing cutters are available in two sizes: standard for 1/8 to 1/2-inch tubing diameters; and heavy-duty for tubing up to 2 inches in diameter.
NITRA aluminum manifolds are available in two variations. Round manifolds have one 3/8" NPT input and either two or three 1/4" NPT outputs. Rectangular manifolds have 1/2" NPT inputs on either end and either three or five 1/4" NPT outputs. Maximum input pressure = Up to 500 psi.
NITRA commercial grade thread sealant tape is made with 100% virgin PTFE for strong chemical resistance. Thread sealant color is white and is USDA and FDA compliant.
|TC-12||NITRA pneumatic tubing cutter for use with 1/8 to 1/2 inch and 4 to 12mm outside diameter flexible plastic tubing.||$4.00|
|TC-20||NITRA pneumatic heavy duty tubing cutter for use with polyurethane, nylon and other flexible tubing up to 2 inch [50mm] outside diameter.||$8.25|
|MYA-2||Pneumatic aluminum manifold, round, 3/8 inch female NPT inlet, two 1/4 inch female NPT outlets||$7.50|
|MYA-3||Pneumatic aluminum manifold, round, 3/8 inch female NPT inlet, three 1/4 inch female NPT outlets||$8.00|
|MLA-3||Pneumatic aluminum manifold, rectangular, 1/2 inch female NPT inlet, three 1/4 inch female NPT outlets||$21.50|
|MLA-5||Pneumatic aluminum manifold, rectangular, 1/2 inch female NPT inlet, five 1/4 inch female NPT outlets||$31.50|
|TS12-260||NITRA pneumatic PTFE thread sealing tape for use with pipe thread connections. 1/2 inch wide by 260 inch long roll||$1.25|