Loading...
- Barcode / RFID / Vision
- Bulk Wire & Cable
- Cables (Terminated)
- Circuit Protection / Fuses / Disconnects
- Communications
- Drives & Soft Starters
- Enclosure Thermal Management & Lights
- Enclosures & Racks
- Field I/O
- HMI (Human Machine Interface)
- Hydraulic Components
- Motion Control
- Motor Controls
- Motors
- Pneumatic Components
- Power Products (Electrical)
- Power Transmission (Mechanical)
- Process Control & Measurement
- Programmable Controllers
- Pushbuttons / Switches / Indicators
- Relays / Timers
- Safety
- Sensors / Encoders
- Stacklights
- Structural Frames / Rails
- Tools & Test Equipment
- Valves
- Water (Potable) Components
- Wiring Solutions
- Retired Products
- Programmable Logic Controllers
- Productivity1000 PLCs
- Productivity2000 PLCs
- Productivity3000 PLCs
- ProductivityCODESYS
- LS Electric XGB Series PLCs
- ProductivityOpen
- CLICK PLCs
-
Do-more H2 PLCs or
Do-more T1H Series - Do-more BRX PLCs
- C-more Touch Panels
- AC & DC Drives
- Motion Control Components
- Servos
- StrideLinx
- Pneumatics
Configuration Utilities
- PLC Family Selector
- P1000 PLC Systems
- P2000 PLC Systems
- P3000 PLC Systems
- ProductivityCODESYS
- CLICK PLC Systems
- Do-more® BRX PLC Systems
- LS-Electric® XGB PLC Systems
- Productivity®Open Systems
- Datalogic® Safety Light Curtains
- LS-Electric® Servo Systems
- Nitra® Pneumatic Grippers
- Object Detection (Sensors)
- PAL Controller Configurator
- Precision Gearbox Selector
- Protos X® Field I/O
- Quadritalia® Modular Enclosures
- Stellar® Soft Starters
- Stepper System Selector
- SureFrame T-slot Extrusion
- SureMotion® XYZ Gantry
- SureServo2® System Selector
- SureStep® Linear Actuators
- Timing Belts & Pulleys
- Werma® Stacklights
- ZIPLinks
Use our selector tool to configure and order.
L (0.375-inch pitch) belts are available in a range of circumferences (number of teeth) to match L timing pulleys for power transmission, allowing adjustment of speed and torque while connecting mechanically rotating components.
This page will refresh momentarily.
Warning
Some of the selected facets have been selected by the {{ assistanceData.title }} Help.
Resetting/clearing ALL facets will end {{ assistanceData.title }} Help.
![Help icon]()
Selection Assistance - {{ assistanceData.title }}
Timing Belts, Timing Pulleys & Tapered Bushings
Category Selection
Timing pulleys, bushings, and belts provide low-cost, reliable power transmission between rotating components with changes to speed and torque as needed.
- Select pulley sizes to accomplish the required speed or torque change
- Bushings allow the connection of one pulley type to different-sized shafts, or vice versa (bushings included with select pulleys)
- Toothed belts interlock with grooved pulleys for dependable power transmission
- For help, use our online Selector Tool for Belts and Pulleys
For part listings and specifications, go to Shop Now
MXL (0.080in Pitch) Timing Belts & Pulleys
MXL pitch (also known as mini extra light pitch) synchronous drive components are ideal for high-speed, low-torque applications.
- Timing belts with 36 to 500 teeth, constructed of neoprene or polyurethane with fiberglass or polyester reinforcement
- Aluminum pulleys from 14 to 72 teeth, with bore sizes from 1/8" to 3/8", and 1/4" width
XL (0.200in Pitch) Timing Belts & Pulleys
XL pitch (also known as extra light pitch) synchronous drive components are designed for medium-speed, low-torque applications.
- Timing belts with 30 to 130 teeth, constructed of neoprene with fiberglass reinforcement
- Aluminum pulleys from 10 to 72 teeth with bore sizes from 1/4" to 3/8", and either 1/4" or 3/8" width
L (0.375in Pitch) Timing Belts, Pulleys & Tapered Bushings
L pitch (also known as light pitch) synchronous drive components are intended for use in medium-speed, medium-torque applications.
- Timing belts with 33 to 160 teeth, constructed of neoprene with fiberglass reinforcement
- Aluminum pulleys from 10 to 40 teeth with bore sizes from 3/8" to 1-1/4", and either 1/2" or 1" width
- Pulleys are also available that include QD (Quick Detach) bushings
5M (5mm Pitch) Timing Belts & Pulleys
5mm pitch synchronous drive components are great for high-torque applications.
- Belts in sizes from 36 to 93 teeth with 9mm or 15mm widths
- Constructed of neoprene with fiberglass reinforcement
- Aluminum pulleys from 20-120 teeth in bore sizes from 5/8" to 1-1/8", and either 9- or 15-mm width
- Pulleys are also available that include QD (Quick Detach) bushings
8M (8mm Pitch) Timing Belts
8mm pitch timing belts are high-torque drive belts perfect for synchronous drive applications requiring premium efficiency and higher power capacity.
- Belts in 20mm or 30mm widths from 55 to 550 teeth
- Constructed of neoprene with fiberglass reinforcement
Safe &
Secure
We accept VISA, MasterCard, Discover, American Express, PayPal or company purchase orders.
Updating...