Loading...
- Barcode / RFID / Vision
- Bulk Wire & Cable
- Cables (Terminated)
- Circuit Protection / Fuses / Disconnects
- Communications
- Drives & Soft Starters
- Enclosure Thermal Management & Lights
- Enclosures & Racks
- Field I/O
- HMI (Human Machine Interface)
- Hydraulic Components
- Motion Control
- Motor Controls
- Motors
- Pneumatic Components
- Power Products (Electrical)
- Power Transmission (Mechanical)
- Process Control & Measurement
- Programmable Controllers
- Pushbuttons / Switches / Indicators
- Relays / Timers
- Safety
- Sensors / Encoders
- Stacklights
- Structural Frames / Rails
- Tools & Test Equipment
- Valves
- Water (Potable) Components
- Wire & Cable Management
- Wire & Cable Termination
- Retired Products
Configuration Utilities
- PLC Family Selector
- P1000 PLC Systems
- P2000 PLC Systems
- P3000 PLC Systems
- ProductivityCODESYS
- CLICK PLC Systems
- Do-more® BRX PLC Systems
- LS-Electric® XGB PLC Systems
- Productivity®Open Systems
- Datalogic® Safety Light Curtains
- LS-Electric® Servo Systems
- Nitra® Pneumatic Grippers
- Object Detection (Sensors)
- PAL Controller Configurator
- Precision Gearbox Selector
- Protos X® Field I/O
- Pyrometers Selector
- Quadritalia® Modular Enclosures
- Stellar® Soft Starters
- Stepper System Selector
- SureFrame T-slot Extrusion
- SureMotion® XYZ Gantry
- SureServo2® System Selector
- SureStep® Linear Actuators
- Timing Belts & Pulleys
- Werma® Stacklights
- ZIPLinks
DIN rails in enclosures and control cabinets allow quick and easy installation of terminal blocks and other DIN mounted snap-on devices. Straight or angled DIN rail brackets tilt and/or raise rails for easy wiring. Accessories include support brackets and clips.
This page will refresh momentarily.
Warning
Some of the selected facets have been selected by the {{ assistanceData.title }} Help.
Resetting/clearing ALL facets will end {{ assistanceData.title }} Help.
![Help icon]()
Selection Assistance - {{ assistanceData.title }}
DIN Rail
DIN rail provides a support structure within a control panel for numerous types of electrical devices. It allows for a much easier mounting method than directly mounting each component to the panel wall.
- Aluminum DIN rail is lightweight, easy to cut, and is designed for terminal block applications
- Steel DIN rail offers the added strength and durability needed when mounting heavier control devices like VFDs
DIN rail can also be used to supply a grounding connection and act as a ground busbar when mounted correctly and the appropriate ground terminal block is installed on the rail.
DIN rail accessories provide options to raise and/or tilt rails; mounting clips add rail mounting capability to small devices that were not manufactured with this mounting method and EMC cable clips provide a convenient method of grounding cable shields.
For part listing and specifications, go to Shop Now
DIN Rail
Newest Additions!
- Pre-cut steel DIN rail in various lengths
- Pre-cut aluminum DIN rail in various lengths
Aluminum DIN rails are easy to cut and deburr, and are suitable for lightweight applications. Sold in pre-cut (72-858mm) or standard (1m) lengths with various heights, these 35mm-wide DIN rails offer zinc plating and passivation (minimum thickness 6 microns).
- 35mm-wide x 10mm-high DIN rail (for terminal blocks only)
- 2-in raised 35mm-wide x 7.5mm-high DIN rail (allows user to raise terminal blocks 2.25in above the back panel)
- Sold in packs of 2, 5, or 10
Steel 35mm-wide DIN rails are available in pre-cut (50-600mm) or standard (1m) lengths.
- Meets international standards
- 35mm-wide x 7.5mm-high DIN rail (intended for lighter components)
- 35mm-wide x 15mm-high DIN rail (intended for heavier components)
- 15mm-wide x 5.5mm-high DIN rail (exclusively for mounting mini terminal blocks)
- Sold in packs of 2, 4, or 10
DIN Rail Accessories
DIN rail accessories include straight and angled support brackets that allow for easy wiring; mounting clips are designed for mounting non-DIN rail compatible devices.
DIN Rail Support Brackets
- Cold-rolled steel treated with galvanic zinc plating and passivation
- 30-degree angled support brackets raise and tilt mounting rails (sold in 10- and 50-packs)
- 1", 2", 2.75" and 3.5" heights (sold in 10-packs of one size)
DIN Rail Mounting Clips
- Clips that allow installation of small devices, designed without 35mm provisions, to be mounted to the rail
- Zinc-plated steel
- M4-0.7 and M5-0.8 screw size DIN rail mounting clips (sold in 5- and 40-packs)
EMC Cable Clips
EMC cable clips mount on 35mm DIN rail to secure shielded cables while providing a conductive path from the cable shielding to the DIN rail for grounding purposes.
- Available in various clip sizes in packs of 5
- Easy tool-free installation
- Zinc-plated spring steel construction
- 35mm DIN rail mounting inside an electrical panel/cabinet
- Easily secure with standard cable ties (not included)
Safe &
Secure
We accept VISA, MasterCard, Discover, American Express, PayPal or company purchase orders.
Updating...