Enclosure Heating & Climate Controls
Touch-Safe Convection Heaters
utilize natural convection, which results in a circulating current of warm air
Fan Heaters: DIN Rail and Screw Mounted
prevent the formation of condensation and ensure an evenly distributed interior air temperature in enclosures
Fan Heaters: Foot Mounted
are designed as stationary units to be mounted on the bottom of the control panel enclosure
single and dual fixed setpoint (pre-set) thermostats. N.C. Thermostat opens on temperature rise above fixed setpoint, N.O. thermostat closes on temperature rise.
single and dual adjustable setpoint versions available. Dual units house two separate thermostats, allowing independent control of heating, cooling or other equipment
Electronic Hygrostats (Humidistats)- sense the relative humidity in an enclosure and turn on a heater at the set point to help prevent the formation of condensation in the enclosure
Check out all of our videos at https://www.AutomationDirect.com/Videos
To subscribe: https://www.youtube.com/user/automationdirect?sub_confirmation=1
**Prices were valid at the time the video was released and are subject to change.
Welcome to Kickstart where you get to see new products here at AutomationDirect. Today I am going to show you some of our new products in our Thermal Management category. What we have today are our new tamperproof fixed style Thermostats and adjustable Thermostats and humidistats from STEGO. There are 14 new part numbers with these new thermostats and humidistats designed for enclosures. The tamperproof Thermostats are preset and come in single and dual set points. They are available in NO or NC and are color coded and you can get these in 2 different temperature ranges. They are DIN rail mounted style as you can see. We also have Adjustable single and dual set point thermostats. These are DIN rail mounted style as well and are also color coded for NO or NC. The temp ranges are 0 to 60C and work with 120vac or 240vac and 30vdc. The dual thermostats are basically 2 separate thermostats in 1 housing – 1 no and 1 nc. These are Electronic Hygrostats– they are for sensing humidity which we know humidity in an enclosure can quickly damage electrical and electronic components. These have adjustable relative humidity set points, are DIN rail mount style and very compact just like the thermostats. These work with 120vac, 240vac or 24vdc. Last we have electronic hygrotherms for sensing ambient temperature and relative humidity. These are DIN rail mount style, very compact as well and operate on 120vac. You can find the agency approvals and specs for these thermal management products on our website at : www.automationdirect.com Don’t forget: we sell other enclosure accessories like heaters, air conditioners, lights and more. Check back with us often on AutomationDirects websites or on Youtube.com/Automationdirect for more Kickstart videos. If you are watching us on YouTube, please let us know what you think about the products or how you plan to use them in your application by leaving us a comment down below. Thanks for watching and we hope to see you again soon.