Check out the list of all tutorial videos on the C-More Micro HMI at this link:
You can reset the C-More Micro panel to factory defaults from the Setup Menu. Press F1 and F5 at the same time for 3 seconds to bring up the setup menu. We can’t press both buttons at the same time with our mouse, so the simulator allows you to right click and select ‘Go To SETUP Menu’ to accomplish the same thing Choose “Setting” then scroll down to “Reset to Factory Default” hit F5 to do it and if you are sure you want to do it, hit F5 again. Your panel is now reset to factory default. Please be careful with this – this will completely Erase you entire panel. So make sure you have a backup of your project BEFORE doing this. Note that if the project was stored on the panel (usually it is) you can recover it before resetting the panel. Check out the How To Video on transferring a project to a panel to learn how to recover a project. That’s all there is to resetting the panel to factory default – be sure to check out the other videos in this series. And as always, please send us any topics you would like to see covered – or - any other comments for that matter – we appreciate the feedback!