- Barcode / RFID / Vision
- Bulk Wire & Cable
- Cables (Terminated)
- Circuit Protection / Fuses / Disconnects
- Communications
- Drives & Soft Starters
- Enclosure Thermal Management & Lights
- Enclosures & Racks
- Field I/O
- HMI (Human Machine Interface)
- Hydraulic Components
- Motion Control
- Motor Controls
- Motors
- Pneumatic Components
- Power Products (Electrical)
- Power Transmission (Mechanical)
- Process Control & Measurement
- Programmable Controllers
- Pushbuttons / Switches / Indicators
- Relays / Timers
- Safety
- Sensors / Encoders
- Stacklights
- Structural Frames / Rails
- Tools & Test Equipment
- Valves
- Water (Potable) Components
- Wiring Solutions
- Retired Products
- Programmable Logic Controllers
- Productivity1000 PLCs
- Productivity2000 PLCs
- Productivity3000 PLCs
- ProductivityCODESYS
- LS Electric XGB Series PLCs
- ProductivityOpen
- CLICK PLCs
-
Do-more H2 PLCs or
Do-more T1H Series - Do-more BRX PLCs
- C-more Touch Panels
- AC & DC Drives
- Motion Control Components
- Servos
- StrideLinx
- Pneumatics
Configuration Utilities
- PLC Family Selector
- P1000 PLC Systems
- P2000 PLC Systems
- P3000 PLC Systems
- ProductivityCODESYS
- CLICK PLC Systems
- Do-more® BRX PLC Systems
- LS-Electric® XGB PLC Systems
- Productivity®Open Systems
- AC Motors
- Datalogic® Safety Light Curtains
- LS-Electric® Servo Systems
- Nitra® Pneumatic Grippers
- Object Detection (Sensors)
- PAL Controller Configurator
- Precision Gearbox Selector
- Protos X® Field I/O
- Quadritalia® Modular Enclosures
- Stellar® Soft Starters
- Stepper System Selector
- SureFrame T-slot Extrusion
- SureMotion® XYZ Gantry
- SureServo2® System Selector
- SureStep® Linear Actuators
- Timing Belts & Pulleys
- Werma® Stacklights
- ZIPLinks
Field I/O (or distributed I/O) can greatly improve system efficiency and reduce wiring costs where end devices are located at a distance, which result in easier installations and faster troubleshooting.
This page will refresh momentarily.
Warning
Some of the selected facets have been selected by the {{ assistanceData.title }} Help.
Resetting/clearing ALL facets will end {{ assistanceData.title }} Help.
![Help icon]()
Selection Assistance - {{ assistanceData.title }}
Field I/O
Field I/O systems are available in a variety of form factors and protocol compatibility, most typically Modbus (RTU or TCP) and EtherNet/IP. IO-Link is a newer and very popular field I/O system that incorporates extended diagnostic information from IO-Link compatible sensors/actuators with standard I/O signals. Extremely fast and reliable EtherCAT communication is also supported by select LS Electric XGB bus couplers and Murrelektronik Premium EtherCAT IO-Link master module.
Field I/O overview
For part listings and specifications, go to Shop Now.
IO-Link
Newest Additions!
- Balluff EtherNet/IP IO-Link master modules and IO-Link hubs
- Wenglor OPT25 series laser distance measurement photoelectric sensors
- More Captron Caneo series capacitive pushbutton switches
- Murrelektronik Premium EtherCAT IO-Link master module and additional IO-Link hubs
IO-Link allows field I/O devices to connect to an IO-Link master module, which creates a more effective field I/O system that provides real-time process values and control signals, while adding the functionality of collecting data such as condition, parameters, and performance from intelligent field devices.
- IO-Link masters handle field I/O signals (e.g., temperature, pressure, etc.) and diagnostic data such as sensor/actuator errors and health of connected IO-Link devices
- IO-Link masters have a built-in web server to view device status, configurations, and diagnostics
- IO-Link masters with screen interface allow IP, subnet mask, and gateway configurations
- IO-Link master options convert IO-Link signals to/from EtherCAT, EtherNet/IP, OPC-UA, and/or MQTT
- IO-Link hubs available to connect discrete digital and analog sensors/actuators to an IO-Link master
- Other IO-Link capable devices include sensors, pushbutton switches, signaling devices/towers, identification products, and communication modules
Protos X I/O
The Protos X compact, modular field I/O system allows a user to monitor and control remote field I/O devices without having to invest in another controller. The easy-to-install design saves time and excess field wiring and speeds up troubleshooting.
- The ultra-compact design makes it perfect for applications where a typical PLC or I/O solution simply would not fit
- Unique interlocking design of the terminals means the data and power buses are carried from module to module and used only when needed
- Four bus coupler models support Modbus RTU, Modbus TCP and EtherNet/IP protocols
STRIDE I/O
The Stride Field I/O family of modules provides a simple and economical means to connect inputs and outputs to a Modbus TCP communications network. Each module operates as a standalone Modbus TCP server, and can be configured via a built-in web server.
- Interfaces remote I/O points to a Modbus TCP network via Ethernet 10/100 Base-T
- Digital inputs, discrete relay and transistor outputs
- Analog current, voltage, resistance and temperature inputs; analog current and voltage outputs
NITRA PAL I/O
The NITRA Pneumatic Automation Link (PAL) system is an electro-pneumatic system as well as a field I/O system that can include electrical I/O or pneumatic valves or both. A system can be controlled either by an EtherNet/IP master or direct wiring (for configurations with exclusively pneumatic valves).
- Supports up to 16 discrete input and 16 discrete output modules per system, plus 4 analog output, and 4 analog temperature
- IP65 rated, machine mountable system decreases design and installation time
- Quick-disconnect electrical and push-to-connect pneumatic connections keep installation clean and simple
- Local expansion allows for several subsystems controlled from one EtherNet/IP node
LS Electric XGB
LS Electric has been in the PLC and I/O business for decades and is well known for reliable control solutions. Their bus coupler and I/O options are an excellent choice for most field I/O needs.
Depending on the model chosen, these bus couplers can communicate with any EtherNet/IP, Modbus TCP or EtherCAT master and allows I/O connections to be installed near the system being controlled. Save time and money by using remote I/O bus couplers and one single Ethernet cable run from the master device instead of multiple wire runs for each I/O point.
One bus coupler can support up to 8 LS XGB PLC I/O modules including high-density 32-point discrete modules. The module features two 100/1000 Mbps RJ45 Ethernet ports for extremely fast real-time communication.
Terminator I/O
Terminator Field I/O combines I/O points with their field terminations into a modular package to save panel space and money. With Terminator I/O, you can use distributed I/O nodes close to field devices for faster and more efficient wiring and troubleshooting.
- Network interface modules support Ethernet, DeviceNET, MODBUS remote I/O; some adapters include an on-board RS232 serial port
- Discrete and analog industrial I/O modules with modular terminal bases
- Configuration flexibility by plugging together a network interface module with up to 16 I/O modules
- For high power systems, combine multiple power supplies on a single I/O set
Safe &
Secure
We accept VISA, MasterCard, Discover, American Express, PayPal or company purchase orders.
Updating...