Loading...
- Barcode / RFID / Vision
- Bulk Wire & Cable
- Cables (Terminated)
- Circuit Protection / Fuses / Disconnects
- Communications
- Drives & Soft Starters
- Enclosure Thermal Management & Lights
- Enclosures & Racks
- Field I/O
- HMI (Human Machine Interface)
- Hydraulic Components
- Motion Control
- Motor Controls
- Motors
- Pneumatic Components
- Power Products (Electrical)
- Power Transmission (Mechanical)
- Process Control & Measurement
- Programmable Controllers
- Pushbuttons / Switches / Indicators
- Relays / Timers
- Safety
- Sensors / Encoders
- Stacklights
- Structural Frames / Rails
- Tools & Test Equipment
- Valves
- Water (Potable) Components
- Wiring Solutions
- Retired Products
- Programmable Logic Controllers
- Productivity1000 PLCs
- Productivity2000 PLCs
- Productivity3000 PLCs
- ProductivityCODESYS
- LS Electric XGB Series PLCs
- ProductivityOpen
- CLICK PLCs
-
Do-more H2 PLCs or
Do-more T1H Series - Do-more BRX PLCs
- C-more Touch Panels
- AC & DC Drives
- Motion Control Components
- Servos
- StrideLinx
- Pneumatics
Configuration Utilities
- PLC Family Selector
- P1000 PLC Systems
- P2000 PLC Systems
- P3000 PLC Systems
- ProductivityCODESYS
- CLICK PLC Systems
- Do-more® BRX PLC Systems
- LS-Electric® XGB PLC Systems
- Productivity®Open Systems
- Datalogic® Safety Light Curtains
- LS-Electric® Servo Systems
- Nitra® Pneumatic Grippers
- Object Detection (Sensors)
- PAL Controller Configurator
- Precision Gearbox Selector
- Protos X® Field I/O
- Quadritalia® Modular Enclosures
- Stellar® Soft Starters
- Stepper System Selector
- SureFrame T-slot Extrusion
- SureMotion® XYZ Gantry
- SureServo2® System Selector
- SureStep® Linear Actuators
- Timing Belts & Pulleys
- Werma® Stacklights
- ZIPLinks
Hydraulic hoses enable the flow of hydraulic fluid from one device (e.g., a power unit, valve, manifold, or actuator) to another. They are constructed to be strong and flexible. Typically, hoses are fabricated on-site; these hydraulic hose assemblies are pre-cut and terminated with JIC fittings.
This page will refresh momentarily.
Warning
Some of the selected facets have been selected by the {{ assistanceData.title }} Help.
Resetting/clearing ALL facets will end {{ assistanceData.title }} Help.
![Help icon]()
Selection Assistance - {{ assistanceData.title }}
Hydraulic Hose Assemblies
Category Selection
Hydraulic hoses are normally sold in bulk and must be cut to the desired length and terminated with fittings on-site. Some manufacturing facilities have the capability to do this themselves, but oftentimes, a new hydraulic project or replacement requires calling a custom hose company to cut and terminate the hoses. Gates hydraulic hose assemblies alleviate the added time and cost associated with hydraulic hose installation, offering pre-cut and terminated assemblies that are ready for use.
For part listings and specifications, go to Shop Now
Gates MXT™ Hydraulic Hoses
New!
Gates MXT hydraulic hoses from Royal Brass & Hose are built using the latest technology, providing a light, flexible hose assembly with exceptional durability and strong construction for a longer life.
- Heavy-duty construction to withstand the harshest environments
- Terminated with the Gates MegaCrimp coupling, which is stronger and more durable than traditional fittings
- Oil resistant, synthetic, MSHA flame resistant black rubber with reinforced braided steel wire
- Hose diameters from 1/4 inch (-4 size) to 3/4 inch (-12 size)
- Hose assembly lengths up to 10 feet
- Straight female JIC swivel fittings on both ends
- Meets or exceeds SAE 100R2/EN 857 2SC/EN 853 2SN, SAE 100R16, SAE 100R17
- Tested to 3X impulse criteria (600,000 cycles)
- All models meet SAE 6149-3
Starting at
$40.00
(1/4MXT-24IN-FJXEE)
Gates ProFlex™ Hydraulic Hoses
New!
Gates PROFLEX hydraulic hoses from Royal Brass & Hose have higher flexibility than most hoses on the market. These are perfect for variable pressure applications or when cost is a concern.
- Compact construction with a smaller outside diameter requires less force to flex
- Terminated with the Gates MegaCrimp coupling, which is stronger and more durable than traditional fittings
- Synthetic, MSHA flame-resistant black rubber with reinforced braided steel wire
- Hose diameters from 1/4 inch (-4 size) to 3/4 inch (-12 size)
- Hose assembly lengths up to 10 feet
- Straight female JIC swivel fittings on both ends
- Meets or exceeds SAE 100R2/EN 857 2SC/EN 853 2SN, SAE 100R16, SAE 100R17
- Qualified for 200,000 cycles impulse life with MEGACRIMP, PCK, GB (-8, -12 & -16) couplings
- All models meet SAE 6149-3
Starting at
$29.00
(1/4PFX-24IN-FJXEE)
Safe &
Secure
We accept VISA, MasterCard, Discover, American Express, PayPal or company purchase orders.
Updating...