- Barcode / RFID / Vision
- Bulk Wire & Cable
- Cables (Terminated)
- Circuit Protection / Fuses / Disconnects
- Communications
- Drives & Soft Starters
- Enclosure Thermal Management & Lights
- Enclosures & Racks
- Field I/O
- HMI (Human Machine Interface)
- Hydraulic Components
- Motion Control
- Motor Controls
- Motors
- Pneumatic Components
- Power Products (Electrical)
- Power Transmission (Mechanical)
- Process Control & Measurement
- Programmable Controllers
- Pushbuttons / Switches / Indicators
- Relays / Timers
- Safety
- Sensors / Encoders
- Stacklights
- Structural Frames / Rails
- Tools & Test Equipment
- Valves
- Water (Potable) Components
- Wiring Solutions
- Retired Products
- Programmable Logic Controllers
- Productivity1000 PLCs
- Productivity2000 PLCs
- Productivity3000 PLCs
- ProductivityCODESYS
- LS Electric XGB Series PLCs
- ProductivityOpen
- CLICK PLCs
-
Do-more H2 PLCs or
Do-more T1H Series - Do-more BRX PLCs
- C-more Touch Panels
- AC & DC Drives
- Motion Control Components
- Servos
- StrideLinx
- Pneumatics
Configuration Utilities
- PLC Family Selector
- P1000 PLC Systems
- P2000 PLC Systems
- P3000 PLC Systems
- ProductivityCODESYS
- CLICK PLC Systems
- Do-more® BRX PLC Systems
- LS-Electric® XGB PLC Systems
- Productivity®Open Systems
- AC Motors
- Datalogic® Safety Light Curtains
- LS-Electric® Servo Systems
- Nitra® Pneumatic Grippers
- Object Detection (Sensors)
- PAL Controller Configurator
- Precision Gearbox Selector
- Protos X® Field I/O
- Quadritalia® Modular Enclosures
- Stellar® Soft Starters
- Stepper System Selector
- SureFrame T-slot Extrusion
- SureMotion® XYZ Gantry
- SureServo2® System Selector
- SureStep® Linear Actuators
- Timing Belts & Pulleys
- Werma® Stacklights
- ZIPLinks
DC gearmotors provide high torque at low speeds, and are designed for use on unfiltered SCR (Thyristor) rectified AC input. They may also be used with PWM (pulse width modulated) DC variable speed drives or across-the-line applications. DC gearmotors are available in a variety of operating voltages and output shaft configurations. Replacement brush kits are available.
This page will refresh momentarily.
Warning
Some of the selected facets have been selected by the {{ assistanceData.title }} Help.
Resetting/clearing ALL facets will end {{ assistanceData.title }} Help.
![Help icon]()
Selection Assistance - {{ assistanceData.title }}
DC Gearmotors
Category Selection
DC gearmotors enable powering a high-torque, low-speed load from a small-framed, low-voltage (12, 24, or 90VDC) DC motor. These gearmotors are usually controlled by a DC drive that outputs a power signal using SCRs or a PWM waveform.
Applications
- Conveyors
- Turntables
- Pick and place
- Indexers
- Small machinery
- Where reduced speed and/or increased torque are required
For part listings and specifications, go to Shop Now
Permanent Magnet DC Gearmotors
Newest Additions!
- IronHorse VP1 series DC gearmotors
IronHorse DC gearmotors are manufactured in the U.S.A. by a leading motor supplier with over 75 years of experience delivering high-quality motors and gearmotors . Our supplier does 100% dynamic testing of the gearmotors to ensure quality. Several shaft configurations are available including parallel and right angle dual shaft models.
- 1/20-1/4 hp
- 12, 24, or 90 VDC
- TENV enclosure
- IP40 environmental rating
- Externally replaceable brushes
- Double-shielded bearings
- Dynamically balanced armature
- Reversible design
- Simple two-lead connection with 18-inch leads, junction box with 8-inch leads, or 36 -inch jacketed power cord
- Not intended for DC power generation
- Made in the USA
DC Gearmotor Accessories
- All IronHorse permanent magnet DC gearmotors are shipped with brushes installed. An extra set of brushes is also included in the box. Replacement brushes are sold as sets.
- DC motor spare parts kit for applicable DC motors and gearmotors includes brush cap cover, terminal box, and two sizes of shaft keys.
Safe &
Secure
We accept VISA, MasterCard, Discover, American Express, PayPal or company purchase orders.
Updating...