ProductivityCODESYS: Built with proven Productivity hardware
CPUs
P2CDS-622
$529.00
ProductivityCODESYS CPU, up to 50 MB ladder memory, microSD card slot, (2) Ethernet 10/100Base-T (RJ45), (1) RS-232/RS-485 (RJ12), (1) RS-232/RS-485 (4-pin terminal) and (1) USB C port(s). Not compatible with Productivity Suite.
Bases
Power Supplies
P2-01AC
$104.00
AC Power Supply, accepts 85-265 VAC, powers any size base, no power budgeting required
P2-01DCAC
$119.00
AC or DC Power Supply, 24 VAC or 12-24 VDC, powers any size base, no power budgeting required
P2-01DC
$113.00
Productivity2000 DC base power supply, 24-48 VDC nominal input. (1) power supply required per base.
P2-02DC
$85.00
Productivity2000 DC base power supply, 24 VDC nominal input. (1) power supply required per base.
Analog Input Modules
All analog input cards require either a removable terminal block (sold separately, P2-RTB or P2-RTB-1) or an optional pre-wired cable and ZIPLink connector module. Ziplinks are not available for the THM, RTD, or the NTC modules.
P2-04AD
$278.00
4-channel, voltage or current, 16-bit, +/- 5 VDC, +/- 10 VDC, 0-5 VDC, 0-10 VDC, 0-20 mA, external 24 VDC required
P2-04AD-1
$210.00
4-channel, current, 16-bit, input current signal range(s) of 0-20 mA, external 24 VDC required.
P2-04AD-2
$216.00
4-channel, voltage, 16-bit, input voltage signal range(s) of 0-10 VDC, external 24 VDC required.
P2-08ADL-1
$205.00
8-channel, current, 13-bit, 0-20 mA, external 24 VDC required.
*Low resolution analog module without OLED display.
P2-08ADL-2
$222.00
8-channel, voltage, 13-bit, 0-10 VDC, external 24 VDC required
*Low resolution analog module without OLED display.
P2-16ADL-1
$252.00
16-channel, current, 13-bit, 0-20 mA, external 24 VDC required
*Low resolution analog module without OLED display.
P2-16ADL-2
$279.00
16-channel, voltage, 13-bit, 0-10 VDC, external 24 VDC required
*Low resolution analog module without OLED display.
P2-06RTD
$460.00
Temperature input module, 6-channel, RTD, 16-bit, Pt100, Pt1000, jPt100, 10 Ohm Cu., 25 Ohm Cu., 120 Ohm Ni.; resistance ranges of 0-10,000 Ohm, 0-6250 Ohm, 0-3125 Ohm, 0-1562 Ohm, 0-781.25 Ohm, 0-390.625 Ohm, 0-195.3125 Ohm
P2-08THM
$452.00
Temperature input module, 8-channel, thermocouple, 16-bit, Types J, E, K, R, S, T, B, N and C; voltage ranges of 0-39 mV, +/-39 mV, +/-78 mV, 0-156 mV, +/-156 mV, 0-1.25 VDC
P2-08NTC
$410.00
Thermistor input module, 8-channel, 16-bit, input range: -40°C to 150°C (-40°F to 302°F), input types: 2252, 10K-AN Type 1, 10K-CP Type 2, 5K, 3K, 1.8K
Analog Output Modules
All analog output cards require either a removable terminal block (sold separately, P2-RTB or P2-RTB-1) or an optional pre-wired cable and ZIPLink connector module.
P2-04DA
$276.00
4-channel, voltage or current, 16-bit, +/- 10 VDC, 4-20 mA, sinking / sourcing, external 24 VDC required
P2-04DA-1
$210.00
4-channel, current, 16-bit, output current signal range(s) of 4-20 mA, external 24 VDC required.
P2-04DA-2
$205.00
4-channel, voltage, 16-bit, output voltage signal range(s) of +/- 10 VDC, external 24 VDC required.
P2-08DAL-1
$287.00
8-channel, current, 12-bit, 4-20 mA, external 24 VDC required. *Low resolution analog module without OLED display.
P2-08DAL-2
$278.00
8-channel, voltage, 12-bit, 0-10 VDC, external 24 VDC required. *Low resolution analog module without OLED display.
P2-16DAL-1
$358.00
16-channel, current, 12-bit, 4-20 mA, external 24 VDC required. *Low resolution analog module without OLED display.
P2-16DAL-2
$343.00
16-channel, voltage, 12-bit, 0-10 VDC, external 24 VDC required. *Low resolution analog module without OLED display.
Analog Combo (Input & Output) Modules
All analog combo cards require either a removable terminal block (sold separately, P2-RTB or P2-RTB-1) or an optional pre-wired cable and ZIPLink connector module.
P2-8AD4DA-1
$441.00
8-channel input, 4-channel output, current, 16-bit, 0-20 mA, 4-20 mA, sourcing, external 24 VDC required
P2-8AD4DA-2
$441.00
8-channel input, 4-channel output, voltage, 16-bit, 0-5 VDC, 0-10 VDC, 0-5 VDC, 0-10 VDC, sinking / sourcing, external 24 VDC required
Discrete Input Modules
All discrete input cards require either a removable terminal block (sold separately, P2-RTB or P2-RTB-1) or an optional pre-wired cable and ZIPLink connector module.
P2-08ND3-1
$70.00
- 8-point Discrete Input
- 12-24 VDC
- Sinking or Sourcing
- 2 isolated commons
- 4 points per common
P2-08NE3
$57.00
- 8-point Discrete Input
- 24 VAC/VDC
- Sinking or Sourcing
- 2 isolated commons
- 4 points per common
P2-16ND3-1
$98.00
- 16-point Discrete Input
- 12-24 VDC
- Sinking or Sourcing
- 2 isolated commons
- 8 points per common
P2-16NE3
$98.00
- 16-point Discrete Input
- 24 VAC/VDC
- Sinking or Sourcing
- 2 isolated commons
- 8 points per common
P2-32ND3-1
$141.00
- 32-point Discrete Input
- 12 - 24 VDC
- Sinking or Sourcing
- 4 isolated commons
- 8 points per common
- ZIPLink connector module and pre-wired cable required, purchase separately
P2-32NE3
$141.00
- 32-point Discrete Input
- 20.4 - 27.6 VAC/VDC
- Sinking or Sourcing
- 4 isolated commons
- 8 points per common
- ZIPLink connector module and pre-wired cable required, purchase separately
P2-16NA
$149.00
- 16-point Discrete Input
- 100-240 VAC
- 2 commons, jumper selectable isolation
- 8 points per common
Discrete Output Modules
All discrete output cards require either a removable terminal block (sold separately, P2-RTB or P2-RTB-1) or an optional pre-wired cable and ZIPLink connector module.
P2-08TD1S
$68.00
- 8-point, 3.3-24 VDC, Sinking
- 2 commons, 4 pts per common
- 2A per point
- 3.3-24VDC @ 12mA external power required
P2-08TD2S
$68.00
- 8-point, 12-24 VDC, Sourcing
- 2 commons, 4 pts per common
- 2A per point
- 12-24 VDC @ 12mA external power required
P2-15TD1
$94.00
- 15-point, 3.3-24 VDC, Sinking
- 2 commons
- 1A per point, 8A per common
- 3.3-24 VDC @ 15mA external power required
P2-15TD2
$92.00
- 15-point, 12-24 VDC, Sourcing
- 2 commons
- 1A per point, 8A per common
- 12-24 VDC @ 15mA external power required
P2-08TD1P
$58.00
- 8-point, 12-24 VDC, Sinking
- 1 common, 8 pts per common
- 0.25A per point
- Short-circuit & OL protection
- 24 VDC @ 30mA external power required
P2-08TD2P
$58.00
- 8-point, 12-24 VDC, Sourcing
- 1 common, 8 pts per common
- 0.25A per point
- Short-circuit and OL protection
- 24 VDC @ 30mA external power required
P2-08TRS
$71.00
- 8-point, Relay
- 6.25-24 VDC or 6-120 VAC
- (6) FORM A (SPST) relays
- (2) FORM C (SPDT) relays
- 8 isolated commons, 1 per pt
- 4A/pt @ 60 deg C (AC or DC)
- 2A/pt if used w/ ZIPLink cable
- External fusing 6.3A max (user supplied)
P2-08TAS
$149.00
- 8-point, 100-120 VAC isolated
- 1A per point
- 8 isolated commons, 1 per pt
- External fusing 1.6A max (user supplied)
P2-16TD1P
$98.00
- 16-point, 12-24 VDC, Sinking
- 1 common, 16 points per
- 0.25A per point
- Short-circuit & OL protection
- 24 VDC @ 55mA external power required
P2-16TD2P
$98.00
- 16-pt, 12-24 VDC, Sourcing
- 1 common, 16 points per
- 0.25A per point
- Short-circuit & OL protection
- 24 VDC @ 55mA external power required
P2-32TD1P
$141.00
- 32-point, 12-24VDC Sinking
- 4 commons, non-isolated
- 0.1A per Point
- Short-circuit & OL protection
- 12-24VDC @ 80mA external power required)
- ZIPLink connector module and pre-wired cable required, purchase separately
P2-32TD2P
$141.00
- 32-point, 24VDC Sourcing
- 4 commons, non-isolated
- 0.1A per Point
- Short-circuit & OL protection
- 24VDC @ 80mA external power required)
- ZIPLink connector module and pre-wired cable required, purchase separately
P2-16TA
$184.00
- 16-point, 100-240 VAC
- 2 common(s)
- jumper selectable isolation
- 8 point(s) per common
- 0.5A/pt, 4A/com @ 55 deg C
- 0.3A/pt, 2.4A/com @ 60 deg C
- External fusing 6.3A max (user supplied)
P2-16TR
$134.00
- 16-point, Relay
- 6.25 - 24 VDC or 6 - 240 VAC
- FORM A (SPST)
- 2 commons, 8 pts per
- 1A/pt, 8A/common @ 60 deg C (VAC or VDC)
- External fusing 8A max (user supplied)
Specialty Modules
P2-04PWM
$128.00
High-speed pulse width modulation output module, 5-24 VDC, sinking/sourcing, 4-channel, single-ended output(s), external 5-24 VDC required.
ZIPLink Wiring Components
Three wiring options are available to better serve the specific needs of your application. Two terminal blocks; one screw type, and one clamp type are available, as well as our ZIPLink wiring system. Why spend the time wiring each I/O point to a terminal when you can get them prewired? ZIPLink pre-wired cables and terminals not only save you valuable time but also keep your installation clean and efficient, which helps when troubleshooting, and ZIPLinks use half the space at a fraction of the cost of standard terminal blocks. Simply snap the ZIPLink connector to the I/O module, connect your field wiring to the ZIPLink terminal and your wiring job is done.
AutomationDirect strongly recommends the use of ZIPLink cables and wiring modules, which eliminate the need for hand wiring of I/O modules to terminal blocks. In fact, many of the I/O modules do not include the terminal blocks for direct connection of I/O.
Note: ZIPLinks are available for most, but not all I/O modules.
ZIPLink Module
ZIPLink Pre-Wired
ZIPLink Pigtail Cable
Safe &
Secure
We accept VISA, MasterCard, Discover, American Express, PayPal or company purchase orders.
„
Updating...