- Barcode / RFID / Vision
- Bulk Wire & Cable
- Cables (Terminated)
- Circuit Protection / Fuses / Disconnects
- Communications
- Drives & Soft Starters
- Enclosure Thermal Management & Lights
- Enclosures & Racks
- Field I/O
- HMI (Human Machine Interface)
- Hydraulic Components
- Motion Control
- Motor Controls
- Motors
- Pneumatic Components
- Power Products (Electrical)
- Power Transmission (Mechanical)
- Process Control & Measurement
- Programmable Controllers
- Pushbuttons / Switches / Indicators
- Relays / Timers
- Safety
- Sensors / Encoders
- Stacklights
- Structural Frames / Rails
- Tools & Test Equipment
- Valves
- Water (Potable) Components
- Wiring Solutions
- Retired Products
- Programmable Logic Controllers
- Productivity1000 PLCs
- Productivity2000 PLCs
- Productivity3000 PLCs
- ProductivityCODESYS
- LS Electric XGB Series PLCs
- ProductivityOpen
- CLICK PLCs
-
Do-more H2 PLCs or
Do-more T1H Series - Do-more BRX PLCs
- C-more Touch Panels
- AC & DC Drives
- Motion Control Components
- Servos
- StrideLinx
- Pneumatics
Configuration Utilities
- PLC Family Selector
- P1000 PLC Systems
- P2000 PLC Systems
- P3000 PLC Systems
- ProductivityCODESYS
- CLICK PLC Systems
- Do-more® BRX PLC Systems
- LS-Electric® XGB PLC Systems
- Productivity®Open Systems
- AC Motors
- Datalogic® Safety Light Curtains
- LS-Electric® Servo Systems
- Nitra® Pneumatic Grippers
- Object Detection (Sensors)
- PAL Controller Configurator
- Precision Gearbox Selector
- Protos X® Field I/O
- Quadritalia® Modular Enclosures
- Stellar® Soft Starters
- Stepper System Selector
- SureFrame T-slot Extrusion
- SureMotion® XYZ Gantry
- SureServo2® System Selector
- SureStep® Linear Actuators
- Timing Belts & Pulleys
- Werma® Stacklights
- ZIPLinks
Enclosure thermal management devices cool or heat inside an enclosure to provide optimum conditions to prevent component failure. Industrial LED lighting provides clear illumination of work areas; enclosure LED lights provide lighting inside an enclosure.
This page will refresh momentarily.
Warning
Some of the selected facets have been selected by the {{ assistanceData.title }} Help.
Resetting/clearing ALL facets will end {{ assistanceData.title }} Help.
![Help icon]()
Selection Assistance - {{ assistanceData.title }}
Enclosure Thermal Management and Lights
An important consideration with electrical enclosures is the regulation of the temperature inside. Both external factors and internal electrical devices can cause wide temperature fluctuations within an enclosure. If not properly regulated, this fluctuation can cause damage to sensitive electrical equipment. Controlling the internal temperature of an enclosure can eliminate the risk of condensation and prevent overheating or freezing of the electrical components.
Another consideration with enclosures is internal visibility. LED lights provide bright lighting inside enclosures with long service life and easy installation.
For general purpose lighting needs, industrial LED lights are available. These rugged, industrial-grade light fixtures illuminate work areas in commercial and industrial environments and are capable of operating in extreme conditions.
For part listings and specifications, go to Shop Now
Enclosure Thermal Management Overview
Industrial LED Lighting Overview
Enclosure Air Conditioners
Newest Additions!
- Pfannenberg side mount and top mount air conditioners
Enclosure air conditioners are designed with internal closed loop cooling systems that provide optimum cooling and protection from dust, oil, and water, by keeping the ambient air outside the enclosure. These air conditioners are environmentally friendly and provide CFC-free service.
- Suitable for NEMA / UL Type 3R, 12, 4, 4X enclosures
- Rated voltages: 48 VDC, 115/120 VAC, 230 VAC and 460 VAC
- Digital temperature controllers
- Active condensate evaporation system
- High unit efficiency
- Tough industrial construction
- Compressor protection system
Thermoelectric Coolers
Thermoelectric coolers utilize internal and ambient heat sinks to dissipate heat into the external environment; they are resistant to extreme ambient conditions and can operate effectively even in dusty and oily environments.
- Rugged stainless steel housings are IP66 and NEMA 4X rated
- Cooling capacities up to 680 BTU/H (200W)
- Only moving part is an axial fan for low maintenance
Air-to-Air Heat Exchangers
Air-to-air heat exchangers are closed loop systems that offer low operating cost and low maintenance.
- For use with NEMA Type 3R, 4, 4X and 12 enclosures
- 120 VAC or 24 VDC powered models
- Easy mount on only one side of enclosure
- Energy efficient; uses no more power than a filtered fan system
- Filter-free; no diminished cooling capacity
Air-to-Water Heat Exchangers
New!
Air-to-water heat exchangers have a high cooling capacity, are extremely energy efficient, and require little maintenance once established.
- For use with NEMA Type 3R, 4, and 12 enclosures
- 115 VAC powered models
- Hydronic push-to-connect fittings
- High-performance ball bearing fans
- Integrated temperature monitoring with alarm contact
Directional Cooling Fans
StegoJet compact fans provide spot cooling for "hot spots" and high heat load components inside an enclosure.
- Rotating joints and hinges allow for air output in almost any direction
- DIN rail or panel mount models
- 100-240VAC, 50/60 Hz
Filter Fans
Filter fans displace hot air inside the enclosure with cooler air from the outside (purchase intake/exhaust grille separately).
Filter fans are available in various voltages, NEMA ratings, mounting options, and in a range of airflow options.
Rack Fans
Fan kits for data communication racks extend the life of rack-mounted equipment by increasing airflow within the rack or cabinet. Fan kits are available with one or two fans, or in a fan tray version with three or nine fans.
Vortex Coolers
Compressed air cooling is used where conventional enclosure cooling by cabinet air conditioners or heat exchangers is not possible.
- Suitable for harsh environments
- Small physical size
- Creates cool air without refrigerants (no CFCs, HCFCs)
- Exceptionally reliable - no moving parts and virtually no maintenance
Heaters
Enclosure heaters controlled with thermostats, hygrostats and hygrotherms protect against condensation. They heat the air inside enclosures, preventing water vapor from condensing on components while providing the greatest possible air circulation and low energy consumption.
- Flat heaters offer an ultra thin design
- Loop heaters are designed to achieve an optimal chimney effect to ensure continuous, even heat distribution
- PTC (positive temperature coefficient) convection and fan heaters in compact sizes and touch-safe designs
- Space-saving fan heaters in panel or 35mm DIN rail mounting styles
- Compact heaters rated for hazardous locations
- Foot-mounted fan heaters are stationary units for mounting on the bottom of an enclosure
Thermostats and Hygrostats
Thermostats and hygrostats regulate temperature and humidity inside an enclosure. Electronic and mechanical models are available, with fixed or adjustable setpoints to fit a wide range of applications.
- Thermostats rated for hazardous areas
- Tamperproof thermostats with single or dual fixed setpoints
- Adjustable single and dual setpoint thermostats; dual setpoint units allow independent control of heating, cooling or other equipment.
- Electronic hygrostats (humidistats) sense relative humidity in enclosure and control a heater to help prevent the formation of condensation
- Electronic hygrotherms sense the ambient temperature and relative air humidity and control a connected device ON to adjust both temperature and humidity level
Ambient Sensors
Ambient sensors measure temperature and humidity and convert the data into a standardized analog 4-20 mA or a digital IO-Link signal.
Vents & Grilles
Vents are ideal for applications where natural convection provides sufficient cooling for enclosure contents.
Grilles work together with filter fans to supply filtered cooler ambient air from outside the enclosure, reducing internal heat and protecting the devices inside the enclosure.
Pressure Compensators & Vent Plugs
Pressure compensators and vent plugs balance the pressure between the inside and outside of an enclosure, easing the strain on enclosure seals and gaskets. Reducing the pressure differential will extend the life of enclosure seals and ensure internal components remain protected from harmful contaminants for years to come.
- Designed to keep water, dust, and other contaminants out
- Metallic and non-metallic options, including stainless steel models
- Available in IP ratings from IP66 to IP69K to align with the specifications of the enclosure
Breathers & Drains
Temperature fluctuations and humidity may cause condensation buildup within an enclosure that can harm components and create corrosion.
Breathers provide a protected opening that allows air to flow freely in or out of the enclosure, helping to reduce condensation issues.
Drains provide a way to safely remove any condensate or accumulated liquids such as water or oil while maintaining IP ratings of the system.
- Available as breathers, drains, or breather/drain combo units
- Built of corrosion and UV resistant materials
- Models with vent channels to reduce insect intrusion also available
Fan Hoods
Fan hoods are designed as an additional protection cover for intake and exhaust filter fans. This protection increases the NEMA rating of the associated filter fan.
- Available in various sizes
- Stainless steel hood
- Seal and mounting screws provided
Filter Media
Newest Additions!
- Pfannenberg premium quick filters
Filter media includes an assortment of filters and filter mats designed for use with specific louvers, vents, air conditioners or filter fans.
Thermal Management Accessories
An assortment of accessories are available to help with installation and maintenance of thermal management products, including thermoelectric cooler mounting kits and vortex generators.
Enclosure Lighting
For easy visibility of components and potential hazards inside electrical enclosures, enclosure LED lights easily mount inside enclosures and provide bright lighting with long service life. Models are available with voltage ratings up to 240VAC or 110VDC, and screw mounting or magnet mounting (for steel enclosures); activation options include an ON/OFF switch or motion sensor.
Industrial LED Lighting
LED lights, also called "machine lights", provide ample illumination for low-visibility work areas while operating under adverse conditions including high temperature, high pressure, and/or strong vibration. AC- or DC-powered units are available, as well as models rated for food and beverage applications.
Safe &
Secure
We accept VISA, MasterCard, Discover, American Express, PayPal or company purchase orders.
Updating...