- Barcode / RFID / Vision
- Bulk Wire & Cable
- Cables (Terminated)
- Circuit Protection / Fuses / Disconnects
- Communications
- Drives & Soft Starters
- Enclosure Thermal Management & Lights
- Enclosures & Racks
- Field I/O
- HMI (Human Machine Interface)
- Hydraulic Components
- Motion Control
- Motor Controls
- Motors
- Pneumatic Components
- Power Products (Electrical)
- Power Transmission (Mechanical)
- Process Control & Measurement
- Programmable Controllers
- Pushbuttons / Switches / Indicators
- Relays / Timers
- Safety
- Sensors / Encoders
- Stacklights
- Structural Frames / Rails
- Tools & Test Equipment
- Valves
- Water (Potable) Components
- Wiring Solutions
- Retired Products
- Programmable Logic Controllers
- Productivity1000 PLCs
- Productivity2000 PLCs
- Productivity3000 PLCs
- ProductivityCODESYS
- LS Electric XGB Series PLCs
- ProductivityOpen
- CLICK PLCs
-
Do-more H2 PLCs or
Do-more T1H Series - Do-more BRX PLCs
- C-more Touch Panels
- AC & DC Drives
- Motion Control Components
- Servos
- StrideLinx
- Pneumatics
Configuration Utilities
- PLC Family Selector
- P1000 PLC Systems
- P2000 PLC Systems
- P3000 PLC Systems
- ProductivityCODESYS
- CLICK PLC Systems
- Do-more® BRX PLC Systems
- LS-Electric® XGB PLC Systems
- Productivity®Open Systems
- AC Motors
- Datalogic® Safety Light Curtains
- LS-Electric® Servo Systems
- Nitra® Pneumatic Grippers
- Object Detection (Sensors)
- PAL Controller Configurator
- Precision Gearbox Selector
- Protos X® Field I/O
- Quadritalia® Modular Enclosures
- Stellar® Soft Starters
- Stepper System Selector
- SureFrame T-slot Extrusion
- SureMotion® XYZ Gantry
- SureServo2® System Selector
- SureStep® Linear Actuators
- Timing Belts & Pulleys
- Werma® Stacklights
- ZIPLinks
IO-Link hubs allow several digital sensors/actuators to connect to an IO-Link master via a sensor/IO-Link cable to provide a low-cost high-quality decentralized installation solution. Use them for basic field I/O signals (no diagnostics), or IO-Link master modules to monitor current/voltage anomalies.
This page will refresh momentarily.
Warning
Some of the selected facets have been selected by the {{ assistanceData.title }} Help.
Resetting/clearing ALL facets will end {{ assistanceData.title }} Help.
![Help icon]()
Selection Assistance - {{ assistanceData.title }}
IO-Link Hubs
Newest Additions!
- Balluff IO-Link hubs
- Additional Murrelektronik IO-Link hubs
The standard architecture of an IO-Link system consists of an IO-Link master and at least one IO-Link device. The system can also support standard field I/O devices to transmit basic sensing/control data to/from a host controller.
An IO-Link hub can be used to aggregate sensor and actuator signals to be transmitted back to an IO-Link master via a single standard cable, providing an economical solution for field I/O data transmission. IO-Link hubs do not support IO-Link diagnostic information data, except for the Balluff hubs, which do support diagnostic data transmission; however, the IO-Link master module does monitor each channel for current and voltage anomalies. (Balluff and Murrelektronik models are available)
IO-Link hubs feature:
- 8 I/O ports (8 or 16 inputs/outputs) for digital modules
- Up to 8 ports (8 inputs) for analog modules (current/voltage or temperature)
- M8 or M12 signal connections, depending on model
- M12 IO-Link connections
- Up to 4A per output (within power limits of IO-Link master)
- Extended channel diagnostics
- Realtime power data monitoring
- Simple installation using A-coded M12 cordset
- Fully-potted, machine-mountable plastic housings or die-cast zinc nickel-plated housings - no enclosure required
- IP65, IP67, and/or IP68 ratings (depending on model)
- All hubs require an IO-Link master module
Starting at
(59710)
For part listing and specifications, go to Shop Now
Safe &
Secure
We accept VISA, MasterCard, Discover, American Express, PayPal or company purchase orders.
Updating...