- Barcode / RFID / Vision
- Bulk Wire & Cable
- Cables (Terminated)
- Circuit Protection / Fuses / Disconnects
- Communications
- Drives & Soft Starters
- Enclosure Thermal Management & Lights
- Enclosures & Racks
- Field I/O
- HMI (Human Machine Interface)
- Hydraulic Components
- Motion Control
- Motor Controls
- Motors
- Pneumatic Components
- Power Products (Electrical)
- Power Transmission (Mechanical)
- Process Control & Measurement
- Programmable Controllers
- Pushbuttons / Switches / Indicators
- Relays / Timers
- Safety
- Sensors / Encoders
- Stacklights
- Structural Frames / Rails
- Tools & Test Equipment
- Valves
- Water (Potable) Components
- Wire & Cable Management
- Wire & Cable Termination
- Retired Products
Configuration Utilities
- PLC Family Selector
- P1000 PLC Systems
- P2000 PLC Systems
- P3000 PLC Systems
- ProductivityCODESYS
- CLICK PLC Systems
- Do-more® BRX PLC Systems
- LS-Electric® XGB PLC Systems
- Productivity®Open Systems
- Datalogic® Safety Light Curtains
- LS-Electric® Servo Systems
- Nitra® Pneumatic Grippers
- Object Detection (Sensors)
- PAL Controller Configurator
- Precision Gearbox Selector
- Protos X® Field I/O
- Pyrometers Selector
- Quadritalia® Modular Enclosures
- Soft Starters
- Stepper System Selector
- SureFrame T-slot Extrusion
- SureMotion® XYZ Gantry
- SureServo2® System Selector
- SureStep® Linear Actuators
- Timing Belts & Pulleys
- Werma® Stacklights
- ZIPLinks
Bronze Exhaust Silencers
An exhausting valve or cylinder port can be outfitted with exhaust silencers to quiet the sound of the escaping air and protect the system from dirt and debris. These bronze silencers are available in cone and flat styles, with NPT, BSPT, or M5 threaded connections.
This page will refresh momentarily.
Warning
Some of the selected facets have been selected by the {{ assistanceData.title }} Help.
Resetting/clearing ALL facets will end {{ assistanceData.title }} Help.
![Help icon]()
Selection Assistance - {{ assistanceData.title }}
Bronze Exhaust Silencers
SBC and SBF series bronze exhaust silencers reduce compressed-air exhaust noise while helping block debris from open valve and cylinder ports. SBC cone models provide greater than 20dB noise reduction, while lower-profile SBF flat models provide greater than 30dB. Both families are rated to 150 psi (10 bar) with M5 x 0.8 and 1/8 to 1/2in threaded connections.
- SBF flat models measure 0.35 to 0.71in long, compared with 0.47 to 1.10in for SBC cone models where exhaust-port clearance affects selection
- 40-micron filtered elements combine exhaust silencing with protection against dirt and debris entering open pneumatic ports
Starting at
/ 2 pk.
(SBC-M5)
