Loading...
- Barcode / RFID / Vision
- Bulk Wire & Cable
- Cables (Terminated)
- Circuit Protection / Fuses / Disconnects
- Communications
- Drives & Soft Starters
- Enclosure Thermal Management & Lights
- Enclosures & Racks
- Field I/O
- HMI (Human Machine Interface)
- Hydraulic Components
- Motion Control
- Motor Controls
- Motors
- Pneumatic Components
- Power Products (Electrical)
- Power Transmission (Mechanical)
- Process Control & Measurement
- Programmable Controllers
- Pushbuttons / Switches / Indicators
- Relays / Timers
- Safety
- Sensors / Encoders
- Stacklights
- Structural Frames / Rails
- Tools & Test Equipment
- Valves
- Water (Potable) Components
- Wire & Cable Management
- Wire & Cable Termination
- Retired Products
Configuration Utilities
- PLC Family Selector
- P1000 PLC Systems
- P2000 PLC Systems
- P3000 PLC Systems
- ProductivityCODESYS
- CLICK PLC Systems
- Do-more® BRX PLC Systems
- LS-Electric® XGB PLC Systems
- Productivity®Open Systems
- Datalogic® Safety Light Curtains
- LS-Electric® Servo Systems
- Nitra® Pneumatic Grippers
- Object Detection (Sensors)
- PAL Controller Configurator
- Precision Gearbox Selector
- Protos X® Field I/O
- Pyrometers Selector
- Quadritalia® Modular Enclosures
- Stellar® Soft Starters
- Stepper System Selector
- SureFrame T-slot Extrusion
- SureMotion® XYZ Gantry
- SureServo2® System Selector
- SureStep® Linear Actuators
- Timing Belts & Pulleys
- Werma® Stacklights
- ZIPLinks
Use our configuration tool to configure and order.
Protos X DC I/O terminals allow distributed monitoring and control of ON/OFF signals and devices that switch DC power such as limit switches, pneumatic solenoid valves, and indicating lights. These field I/O DC terminals provide 4, 8, or 16 points of sinking or sourcing 24VDC I/O in a single module.
This page will refresh momentarily.
Warning
Some of the selected facets have been selected by the {{ assistanceData.title }} Help.
Resetting/clearing ALL facets will end {{ assistanceData.title }} Help.
![Help icon]()
Selection Assistance - {{ assistanceData.title }}
Protos X™ I/O
DC Terminals
DC Terminals
Category Selection
The Protos X "Xpansion" I/O System ...
using serial Modbus RTU (RS-485) or Ethernet Modbus TCP or Ethernet/IP communications protocols
Protos X "Xpansion" Field I/O
Protos X I/O DC Terminals
Eight DC I/O terminals are available.
- 4, 8 and 16-point 24VDC discrete inputs
- 4-point (0.5A and 2A), 8 and 16-point 24VDC discrete outputs
- 8-point input / 8-point output 24VDC combination terminal
The Protos X compact, modular field I/O system
Allows a user to install remote field I/O devices without having to invest in another controller. The unique slim design and low cost of the Protos X I/O makes it the most practical distributed I/O available today. The ultra-slender form factor makes it easy to install on or near machine or application components, saving time and excess field wiring and speeding up troubleshooting. The ultra-compact design makes it perfect for applications where a typical PLC or I/O solution simply would not fit.
PX-149
24VDC Discrete Input Terminals
4, 8 and 16-point 24VDC discrete inputs
- PX-144 DC Input Terminal provides four electrically isolated 24VDC sinking inputs with LED status. For use with 3-wire and 2-wire sensors.
- PX-148 DC Input Terminal provides eight electrically isolated 24VDC sinking inputs with LED status
- PX-149 DC Input Terminal provides sixteen electrically isolated 24VDC sinking inputs with LED status
24VDC Discrete Input Terminals Overview
PX-249
24VDC Discrete Output Terminals
4, 8 and 16-point 24VDC discrete outputs
- PX-244-1 DC Output Terminal provides four 24VDC 0.5 A short-circuit protected sourcing outputs with LED status. For use with 3-wire and 2-wire devices.
- PX-244-2 DC Output Terminal provides four 24VDC 2A short-circuit protected sourcing outputs with LED status
- PX-248 DC Output Terminal provides eight 24VDC 0.5 A short-circuit protected sourcing outputs with LED status
- PX-249 DC Output Terminal provides sixteen 24VDC 0.5 A short-circuit protected sourcing outputs with LED status
PX-549
24VDC Discrete
Combination Terminal
8-point input / 8-point output 24VDC combination terminal
- PX-549 DC Input/Output Terminal provides eight 24VDC inputs and eight 24VDC 0.5 A outputs with reverse polarity protection and LED status
The 24VDC combination input/output terminal is
$138.00
(PX-549)
Configure your Protos X Distributed I/O System
Choose system components and send the selected parts directly to your shopping cart
Safe &
Secure
We accept VISA, MasterCard, Discover, American Express, PayPal or company purchase orders.
Updating...