What's New at AutomationDirect

Morse bi-metal hole saws offer a cost-effective, high-performance solution for various cutting tasks, featuring a patented tooth set design that enables faster hole cutting. For tougher materials, carbide-tipped hole cutters deliver clean, efficient cuts in stainless steel, aluminum, pipe, conduit, and composites, ensuring long-lasting use. Impact-rated hole saws are designed specifically for sheet metal, with expertly engineered features that provide quick, effortless cuts and easy size changes via a 1/4-inch impact shank. These tools are available individually or in convenient sets, complete with essential accessories to keep your work moving efficiently.

Morse hole saws start at $6.50 (MHS12), and hole saw sets start at $42.00 (IHSKITIMP).

LUTZE^® SILFLEX FBP VFD cable is the ultimate solution for the cabling challenges faced by today's food and beverage machine builders and processing companies. Phthalate-, talc-, and silicone-free cables reduce contamination risk and provide resistance to oils and fats that are common to food processing. The SILFLEX FBP flexible VFD cables from LUTZE are safe for food contact per FDA guidelines 21 CFR 175.300, certified by Ecolab for resistance to the most common cleaning agents, and feature reduced cable diameter for easy routing and installation. These FBP cables may be run without conduit in some areas due to their external wiring approval, washdown certification, and food contact rating. Made in the USA, these cables are available with 18 AWG to 10 AWG size shielded conductors and are cut to length in 1 ft increments with a 20 ft minimum length.

LUTZE^® SILFLEX FBP VFD cable starts at $4.00 / ft. (20 ft. min.) (A6061804-1).

Endress+Hauser iTHERM and iTEMP series temperature transmitters offer precise and reliable temperature measurements with easy integration, a rugged design, flexible configurations, and IO-Link or HART communication options.

Endress+Hauser's TM311 iTHERM CompactLine integrates an RTD and transmitter in a stainless steel housing, featuring an adjustable temperature range within 32 to 302^° F (0 to 150^° C) and probe insertion lengths of 30-150mm. They are available with 4-20 mA or IO-Link outputs, 1/4" or 1/2" NPT process connections, as well as 3-A approved sanitary tri-clamp fittings, and an IP69 rating with suitable cables.

TMT36 iTEMP series head-mounted temperature transmitters support Pt100 and Pt1000 RTD inputs with a single-channel IO-Link output for easy configuration and diagnostics. They are available with screw or push-in terminals and can be used with the optional TID10 series digital display.

TMT72 iTEMP series programmable, HART-compatible temperature transmitters accept RTD, thermocouple, resistance, or voltage inputs and are available with connection head or DIN rail mounting options. They feature configurable measuring ranges, linearized 4-20 mA outputs, Bluetooth setup via the free SmartBlue app, and adjustable filtering. They also support the optional TID10 series digital display.

The rugged TMT142B iTEMP transmitter supports multiple input types and offers configurable ranges, HART communication, adjustable filtering, and a built-in digital display. Its IP67-rated die-cast aluminum housing is suited for harsh environments, and Bluetooth via the SmartBlue app enables remote configuration.

Endress+Hauser iTHERM and iTEMP series temperature transmitters are CSA and CE marked, RoHS compliant, and offer a 1-year warranty.

The iTEMP series temperature transmitters start at $210.00 (TMT36-13A9/101), the iTHERM series start at $234.00 (TM311-TLU6/0), and the head-mount digital display (for TMT36 & 72 series) is priced at $121.00 (TID10-1009/0).

WAGO lean managed industrial Ethernet switches integrate principles of lean manufacturing into their design and functionality, offering advantages such as waste reduction, improved efficiency, and more. Their web-based interface and easy-to-use diagnostic tools reduce configuration, monitoring, and troubleshooting time, and the diverse communication protocol choices eliminate the need for specialized switches, making these switches an ideal IIoT solution. The VLAN support allows logical segmentation of the network, which improves traffic management and performance with efficient bandwidth utilization. Select models add MAC Security, which limits unauthorized network access, helps isolate traffic, and improves overall network security without the need for expensive complex hardware.

WAGO lean managed switches start at $713.00 (852-1812).

Define Instruments Twin Link series point-to-point wireless I/O devices provide a cost-effective solution for applications where wiring is difficult or impractical, such as long distances, physical obstacles, or moving equipment. They create a dedicated, bidirectional radio link between a pre-paired set to reliably transmit analog or digital signals with minimal setup. The signals can be transmitted up to 0.9 miles line-of-sight or 500 feet through walls, and up to 15 repeaters can be used to improve the signal path or extend the range.

The sender/receiver pair accepts thermocouple, RTD, mA, or frequency inputs and provides two isolated 4-20 mA outputs for seamless integration with control or monitoring systems. Discrete I/O is also included to support advanced control, alarms, or transparent signal pass-through. The free Define ToolBox software simplifies configuration and includes advanced features such as signal simulation, configuration export, and PDF documentation.

Define Instruments Twin Link series point-to-point wireless I/O devices are FCC certified, CE marked, RoHS compliant, and offer a 5-year warranty.

The Twin Link point-to-point wireless I/O sender/receiver pair is priced at $675.00 (DEFINE-TWIN-LINK) and repeaters are priced at $260.00 (DEFINE-REPEATER).

Ashcroft B-Series mechanical pressure switches deliver precise, reliable pressure sensing in a compact and rugged design. Equipped with cost-effective, high-capacity 15A relay outputs, they eliminate the need for external contactors or interposing relays. Select models feature a narrow deadband for highly accurate trip points. With adjustable setpoints, wide pressure ranges up to 3000 psig, versatile wall and conduit mounting options, durable epoxy-coated aluminum housings, and NEMA 4X/IP66 ratings, these switches are built for demanding industrial, process, and outdoor applications.

B-Series pressure switches are UL Listed, CSA approved, CE marked, RoHS compliant, and offer a 1-year warranty.

These new Ashcroft pressure switches start $206.00 (B424B15).

Made in the USA with high-carbon USA steel, CHANNELLOCK tools are designed with strength and durability in mind. CHANNELLOCK straight jaw pliers feature undercut tongue and groove channels to prevent slipping, and their Griplock jaw tongue and groove pliers have an offset head for greater leverage with patented SAFE-T-STOP^® technology to prevent pinching. CHANNELLOCK long nose pliers, with a crosshatch tooth pattern and narrow nose profile, and slip joint pliers, with a serrated jaw and an added wire cutting shear, are perfect for soft wire. High-leverage diagonal/curved cutting pliers, with precision-machined knife and anvil-style cutting edges, ensure perfect mating for superior performance and longevity. Assorted pliers sets as well as technicians' pliers sets are available.

New CHANNELLOCK multi-purpose wiring tools feature models that can perform a variety of tasks, including wire stripping, wire cutting, deburring, reaming, crimping, or bolt cutting.

CHANNELLOCK adjustable wrenches are made of rugged chrome vanadium steel and feature non-protruding jaws for accessing hard-to-reach areas. Measurement scales are laser-engraved for sizing nuts, pipe, and tube diameters while its four-thread knurl adjuster boosts accuracy. Models with extra-wide jaws are also available to accommodate larger nuts and bolts.

CHANNELLOCK pliers start at $14.00 (526), multi-purpose wiring tools start at $16.00 (958), adjustable wrenches start at $18.00 (804), and tool sets start at $45.00 (WS-2).

Gates hydraulic hose assemblies, from Royal Brass & Hose, eliminate the need to cut and terminate hydraulic hoses on-site and are offered in the ProFlex or MXT series. The ProFlex series features a compact construction with a smaller outer diameter, allowing them to flex with less force. This series is perfect for variable pressure applications or when cost is a concern. The MXT series provides a light, flexible hose assembly with exceptional durability and strong construction for a longer life. This series is ideal for harsh environments. Both MXT and ProFlex hose assemblies are offered in pre-cut lengths up to 10 feet and are terminated with a Gates MegaCrimp coupling, which is stronger and more durable than a traditional fitting. HY-TECH adapters are made from plated steel and are available in many connection styles, allowing for the final connections to be made between hoses and valves, actuators, or manifolds. All products meet SAE J514 & 6149-3 and come with a 1-year warranty.

Gates hydraulic hose assemblies start at $29.00 (1/4PFX-24IN-FJXEE), and HY-TECH adapters start at $3.75 / 2pk. (4MJ-4MB).

Laumas precision-engineered load cells, transmitters, and accessories deliver reliable performance in industrial weighing and force measurement applications. The FCAL series high-precision bending beam load cells are ideal for low- to mid-capacity systems. CTL series load cells are designed for both tension and compression, with excellent linearity. The CBL series low-profile compression load cells are perfect for space-limited applications.

Laumas load cell transmitters provide reliable signal conversion for precise monitoring and control. Single-channel models offer a 4-20 mA output and support Modbus RTU. Multi-channel models support Modbus RTU and offer I/O for batching, taring, and alarm functions. Depending on the version, select models also support Modbus TCP, EtherNet/IP, or include a built-in web server for remote access. The Laumas Instrument Manager software optimizes multi-channel transmitters by enabling PC-based setup, real-time monitoring, and calibration, simplifying installation and reducing downtime.

Mounting accessories are engineered to protect load cells, maintain accuracy under dynamic loads, and extend equipment life. Equalization junction boxes ensure consistent readings across multi-cell systems.

All Laumas products deliver excellent value and are backed by a one-year warranty.

Load cells start at $295.00 (FCAL50), transmitters start at $210.00 (TLE), the equalization board is priced at $89.00 (CE41N), and mounting accessories start at $49.00 (ANTIV45).

Patlite industrial signal beacons provide clear and unambiguous visual indication ensuring quick and easy detection by floor personnel. These beacons are available in three series with various monocolor options and a Fresnel lens that distributes ambient, uniform light from all globe surfaces, including the top. All series are IP23 rated and can reach the IP65 rating by using the optional gasket. The SF series is a multifunction unit that offers 22 selectable light patterns including simulated rotation, flashing, and pulsing. The SK series has a 120rpm rotating reflector mounted on steel ball bearings for reduced wear and long-lasting operation. The SL series has a wider light-emitting surface with over 5 times the luminous intensity of competing products and includes a selectable continuous blinking or triple flash lighting pattern.

Patlite audible-visual monocolor industrial signal beacons are identical to the visual series above, but each series adds an 86- or 88-dB audible signal for increased indication awareness.

Patlite visual industrial beacons start at $89.00 (SKS-M1J-B), and the audible-visual industrial beacons start at $112.00 (SL08-M1KTB-B)

Drag chains route cables / hoses to moving components and help to extend cable / hose life, reducing equipment downtime and repair costs. igus 2500 series cable / hose drag chains feature a snap-open mechanism along the chain's outer radius to allow convenient access to the chain's channel after installation. The hinged crossbar can be swiveled by more than 180° on both sides, which allows for lightning-fast closure by hand and a secure fit without additional locking devices. These chains are constructed of rugged igumid^® G material and support cables up to 23mm [0.91in] in diameter. End brackets provide a secure mounting point for chains and have cable tie strain relief tabs for securing cables and hoses. This series can be designed into systems requiring 2.2m [7.4ft] of unsupported spans and is capable of extending up to 100m [328ft] in a gliding configuration. The chain is packaged in chain lengths of 1m [3.2ft] (22 connected links) and may be shortened or extended by one or more links to fit the application.

igus 2500 series cable / hose drag chains start at $59.00 (2500-03-055)

ifm fail-safe inductive sensors feature (2) OSSD outputs that can be connected to a safety relay for safety applications requiring the detection of metal objects. These sensors are designed to trigger a safe state (like stopping a machine) if the sensor fails, reducing the risk of injury to personnel or damage to equipment. They are available in 12mm, 18mm, and 30mm tubular and 40 x 40mm cube styles and are constructed of stainless steel or bronze-plated brass. Flush mount and non-flush mount models offer installation flexibility. All models come with a 4-pin M12 quick-disconnect and have environmental ratings of IP65/IP67/IP68 or IP68/IP69K.

ifm fail-safe inductive sensors have a 5-year warranty and start at $125.00 (GF854S)

IronHorse VP1 series DC gearmotors are designed to power high-torque mechanical loads at lower speeds with a compact motor. They are powered by 90 VDC and are designed for use with unfiltered SCR or PWM waveforms generated by a DC drive. They can also be used in across-the-line applications. They are available in a rugged die-cast aluminum frame in three frame sizes. These gearmotors can provide torque up to 280 in-lbs, with a maximum speed of 165 rpm. Wiring is a simple two-lead connection and brushes are externally replaceable for easy maintenance.

IronHorse VP1 series DC gearmotors are manufactured in the USA and come with a 1-year warranty. They start at $230.00 (VP1C-90V-1007).

Balluff EtherNet/IP IO-Link master modules provide EtherNet/IP communications capability for IO-Link systems, with IIoT, REST API, and/or MQTT depending on model. They are available in a rugged IP67 die-cast zinc nickel-plated housing for harsher environments, or in a weld-proof potted plastic format. Select models include built-in screen interface for easy IP, subnet mask, and gateway configuration. Balluff IO-Link hubs allow several sensors and actuators to be easily connected to an IO-Link master via a standard sensor cable and are housed in die-cast zinc nickel-plated housings to withstand extreme conditions. These hubs transmit standard field I/O signals, including analog and temperature data. Both masters and hubs are machine mountable and do not require enclosures. Also available is a Balluff IO-Link analog converter which provides a low-cost solution to convert various analog I/O signals into a single I/O-Link connection.

The Balluff EtherNet/IP IO-Link master modules start at $549.00 (BNI00HM)), the new IO-Link hubs start at $291.00 (BNI00F4), and the IO-Link analog converter is priced at $249.00 (BNI00C6).

New Comepi SB series pre-assembled polycarbonate control stations offer emergency stop and start/stop combo options. The emergency stop control stations include one red mushroom head twist-to-release pushbutton with various contact configurations. Models with guards that are padlockable and models with M12 quick-disconnects are available. The start/stop combo control stations offer various pushbutton, selector switch, and/or indicator combinations to best fit your application. You can also configure your own station using one of the new IP67/IP69K rated pushbutton enclosures (use with appropriate pilot devices to maintain rating).

Also added are ECX series operator-only momentary pushbuttons, maintained selector switches, and an emergency stop mushroom head twist-to-release pushbutton. All are plastic, 22mm, IP65 rated, with 30mm operators for pushbuttons (40mm for mushroom head), and are available with various functions. Contact blocks are sold separately. Accessories to complement these devices have also been added, including legend plates, mounting flanges and magnets, contact blocks, special tools, and more.

Comepi pilot devices start at $3.00 (ECX4111), pushbutton enclosures start at $13.00 (SB114), and control stations start at $22.00 (SB114-081-G).

Pfannenberg DTT 6000 series top-mounted air conditioners are 100% condensate safe, provide up to 14,000 BTU/H, and are ideal for space-saving installation on the top of a NEMA 12 control enclosure. Pfannenberg's DTS series 3000 air conditioners are made in the USA, offer cooling capacities up to 25,000 BTU/H, and can be used with NEMA/UL Type 3R, 4, 4X, and 12 enclosures. They offer several frame sizes, filter-free operation, and feature compressor and fan motors outfitted with integral temperature switches.

Pfannenberg air-to-water heat exchangers are ideal for applications where a tempered water source is readily available and in any environment where ambient air temperature is high and the atmosphere is corrosive. Air-to-water heat exchangers have a high cooling capacity, are extremely energy efficient, and require less maintenance once established.

Premium quick filter rolls from Pfannenberg provide a low-cost, single-use filter option. These premium quick filters are affixed externally, acting as the first line of defense for critical equipment and eliminating the need for tools and maintenance downtime when a filter change is needed. 60 filter sheets per roll allow for more than a year's worth of fast weekly changes.

Pfannenberg air-to-water heat exchangers start at $1,536.00 (12351010005), air conditioners start at $2,698.50 (13383144255), and PQF rolls start at $119.00 (18881500018).

New WAGO 787-3861 series single-channel electronic circuit breakers offer a lower cost option and a compact 6mm form factor to provide safe and reliable supplementary protection for 24 VDC control circuits.

These electronic circuit breakers offer remote monitoring and control, clear LED indicators, and fast response to overloads and short circuits, minimizing downtime. They are designed for demanding environments and enhance system reliability with robust protection and easily understood diagnostics.

Distribution modules are also offered and allow expansion of 787-3861 series electronic circuit breaker terminals. Models are available for Vout, GND, or both and are rated up to 20A.

In addition, a new 60W model has been added to the WACO Eco2 series power supply lineup, which is value-priced and UL approved for Class 1, Div 2 hazardous locations.

The WAGO 787-3861 series single-channel electronic circuit breakers and Eco2 series power supply are UL Listed, CE and UKCA marked, and offer 2-year warranties. WAGO electronic circuit breaker components start at $11.00 (787-3861/000-1000) and the Eco2 power supply is priced at $93.00 (2687-2143).

New AchieVe FKL series 18mm tubular photoelectric sensors feature a rugged nickel-plated brass construction with a high IP67 protection rating. They employ Class 1 or Class 2 red lasers to provide sensing distances up to 50 meters.

These sensors, offered in diffuse with background suppression, diffuse, polarized retroreflective, and through-beam sensing styles, offer complementary light-on/dark-on operation, a 10 to 30 VDC operating voltage range, potentiometer or teach-in button sensitivity adjustment, and up to a 1.5kHz switching frequency.

The new AchieVe 18mm photoelectric sensors are UL Listed, CE and UKCA marked, and RoHS compliant. They offer a 3-year warranty and start at $108.00 (FKLS-BN-1E).

AttaBox Heartland/Heartland SL series hinged screw cover enclosures provide an alternative to conventional latch enclosures. The hinged screw cover configuration gives the enclosure the highest level of protection against water intrusion (NEMA 6P), and the polycarbonate resin in the Heartland series has attained the best available "F1" rating, having passed critical tests for UV exposure and water immersion. Without latches, covers for these models are screwed into place, ensuring the NEMA 6P rating remains in effect, and can be padlocked for added security.

Clear Stahlin SolarShield HMI covers are now available in addition to existing opaque models, with larger sizes of both versions added to accommodate a wider range of HMIs. These clear covers are composed of lightweight, high-impact rated, and UV-resistant polycarbonate material and are ideal for protecting HMI screens from UV and harsh environmental conditions.

Newly added AttaBox Heartland/Heartland SL hinged screw cover enclosures start at $82.00 (AH664HW); new clear Stahlin HMI covers start at $152.00 (HMICVR1008C).

Pre-cut aluminum DIN rail, available in sizes from 72mm to 858mm, helps eliminate the risk to personnel and saves time spent on cutting and drilling products with sharp edges and blades. Pre-cut DIN rails are also deburred for safety and to prevent cables and wires from being damaged during installation. Aluminum DIN rails are lightweight, allowing for increased maneuverability, easy mounting, and a dependable support structure for terminal block applications.

Pre-cut aluminum DIN rails start at $9.75 / 5pk. (DN-R35SAL1-072-5)).

Vision lighting fixtures now available from Lumher include bar, ring, flat, and spot lights. Bar lights are offered in two series, the standard power PD series and the high-power FD series, which emit twice the light from the same package. They are available in semi-diffuse and ultra-diffuse lighting angles, as well as in white, red, and infrared models. Ring lights are available in the same lighting angles with white or infrared LED options. Flat lights offer semi-diffused lighting angles and emit a white light. Spotlights provide a narrow 6° lighting angle for highly focused light at varying distances. All lights offer continuous operation; select models support continuous or strobe operation. All Lumher lights are rated IP65 and operate on 22.8-25.2 VDC. A wide range of mounting accessories is available to simplify the installation process. Lumher products come with a 3-year warranty.

Lumher vision lighting fixtures start at $226.00 (PD01PD5CY).

Helukabel's HELUKAT industrial Ethernet and Profinet cables feature a halogen-free, flame-retardant, and durable construction built to support a variety of industrial requirements. New Type B, Type B Hybrid (with power conductors), Type R, and Type C Profinet cables are designed to provide reliable data transmission in dynamic or harsh industrial applications while protecting against environmental factors like oil, chemicals, and abrasion. Tray rated, flexible, and continuous flexing versions are offered. HELUKAT industrial Ethernet cables of varying flexibility have also been added, with Cat5, Cat5e, Cat6, Cat6a, Cat7, Cat7a, and Cat7e versions available to serve a wide range of industrial and robotic applications.

Newly added HELUKAT Ethernet cables start at $1.05 / ft. (20 ft. min.) (H805702-1) and HELUKAT Profinet cables start at $1.78 / ft. (20 ft. min.) (H802914-1).

Also known as string encoders or string potentiometers, Lika draw wire linear measurement devices use a steel cable wrapped on a spring-loaded reel to measure distance. The reel is connected to a rotary encoder or potentiometer that can provide very accurate feedback on how far the steel cable has been extended. Lika draw wire encoders provide encoder (quadrature) or 0-10V or 4-20mA analog outputs and are available in pull-lengths from 2 to 10 meters.

They are a good solution when the operational space is constricted, or the environmental conditions are severe. The body of the encoder can be mounted in a safe place, easily accessible, and adequately protected, while the measuring wire requires minimum space and can be subjected to harsher conditions. They can also replace traditional encoders in some cases.

Typical applications include linear measuring, vertical lift measurement, cylinder stroke measurement, or any application where accurate, inexpensive, and easy-to-install measurement of a linear distance is required.

Lika draw wire encoders start at $249.00 (DWI-2M-H0500-RL2).

GC Valves 71 series 2-port water valves are now available and are constructed of durable lead-free brass. They are certified to NSF/ANSI 61 and have NSF-approved EPDM diaphragms. They are a great choice for drinking water applications and are ported for the most popular NPT sizes (up to 2") with a 120 VAC or 24 VDC solenoid coil. Series 71 valves are offered in normally closed (N.C.) or normally open (N.O.) styles, have a piloted diaphragm, and include an 18mm (DIN 43650A) style wiring plug. These valves also feature a 150 or 200 psi max operating pressure.

GC Valves NSF brass water valves are made in the USA, have a 3-year warranty, and start at $128.00 (NS711YH02C9CG1).

ICON Process Controls Truflo^® TKM series paddle wheel liquid flow meters provide reliable, full-pipe liquid flow measurement with exceptional long-term performance. These rugged, highly repeatable sensors deliver outstanding value with no scheduled maintenance required. Built with a chemically resistant PVC body, they are ideal for corrosive liquid process applications. Each unit comes preprogrammed, and offers a bright, 360° rotatable LED display for clear, convenient readability.

Models offer sensing ranges up to 357 GPM and are available with 1/2 to 2-inch Schedule 80 socket process connections. Featuring 4-20 mA and pulse outputs, they incorporate the proprietary ShearPro^® paddle wheel and through-pin designs for enhanced reliability and ±0.5% accuracy. The true-union design enables easy installation, allowing quick sensor removal and servicing without disrupting the pipeline.

The new ICON flow meters are CE marked and RoHS compliant. They offer a NEMA 4X and IP66 protection rating, a 1-year warranty, and start at $944.00 (TKM-15-P).

Datasensing SH4 series 14mm finger and 30mm hand safety light curtains are available in basic models with automatic restart or standard models, which add external device monitoring (EDM) and an optional manual restart. Body protection models in 300 or 400mm resolution are available only in the standard version. The finger and hand protection light curtains offer no dead zone for maximum protection.

14mm resolution light curtains provide a protective height from 300 to 1200mm and operate at a distance of 0.2 to 10m. Hand protection models provide a protective height from 300 to 1800mm and have a 0.2 to 20m operating distance. The body protection models come in protective heights from 800 to 1200mm and operate from 0.5 up to 70m.

All light curtains for this launch include 2 OSSD outputs, M12 connectors, IP65 and IP67 protection ratings, and simple alignment with an LED guide. Accessories to aid with installation and setup are also offered.

Datasensing SH4 Category 4/Type 4 safety light curtains are available as sender/receiver pairs, come with a 1-year warranty, and start at $662.00 (SH4-30-0300-B-5).

Wenglor OPT25 series laser measurement sensors offer best-in-class distance sensing for ranges within 1 meter. These sensors are IO-Link v1.1 compatible, employ a Class 1 red or Class 2 blue laser, use triangulation to measure distances with extreme accuracy, and can reliably detect tiny objects with a reproducibility up to 0.8µm.

Powered by Wenglor's proprietary TripleA technology, the OPT25 series ensures precise distance readings regardless of object material, color, or shape, even in demanding environments with fluctuating light and temperature conditions. They can even detect flat objects directly in front of a background. T-splitters are also offered to allow two sensors to make automatic thickness measurements.

Blue laser light models provide enhanced performance for red-hot or organic surfaces, polished metals, shiny plastics, or dark paints. The shorter wavelength blue laser light does not penetrate as deeply into the surface, resulting in high accuracy. Sensor configuration methods vary by model, with options including a teach-in button, an easy-to-read OLED display, or the intuitive Wenglor weCon Bluetooth app.

The new Wenglor laser measurement sensors are UL Listed, CE and UKCA marked, and RoHS compliant. They offer a 1-year warranty and start at $802.00 (OPT2512).

Autonics BTF, BTS, and BPS series miniature photoelectric sensors feature ultra-compact slim or narrow housings that are easy to install in tight spaces. The lineup includes:

• BTF ultra-thin series with housings only 3.7mm thick (4.6mm including lens)
• BTS ultra-slim series with housings only 7.2mm wide
• BPS compact series low-profile, flat housings only 7.5mm thick (8.1mm including lens)

These miniature sensors offer sensing distances up to 3m, durable PBT thermoplastic housings, and an IP67 protection rating. They feature highly visible red LED or infrared light sources for reliable detection and are available in diffuse, diffuse with background suppression, retroreflective, and through-beam sensing styles.

The new Autonics miniature photoelectric sensors are CE and UKCA marked and RoHS compliant. They offer a 3-year warranty and start at $79.00 (BTF30-DDTL).

New ProSense linear potentiometers offer reliable and consistent position measurement while delivering exceptional value and performance. These position sensors measure linear displacement by converting mechanical movement into a resistive output. Typically, they require a signal conditioner or a 10 VDC supply to provide an analog signal for a PLC.

ProSense linear potentiometers provide accurate position feedback for a variety of applications, from manufacturing equipment and robotics to automotive systems. These versatile devices are offered in fixed, rodless, spring-loaded, and pivoting-slide mechanical styles with stroke lengths ranging from 10 to 1250 mm.

The new ProSense linear potentiometers are CE marked, RoHS compliant, and offer a 1-year warranty. They are competitively priced and start at $103.00 (LSR-33P-0030-A5-C1).

IronHorse worm gearboxes with IEC inputs offer all the same features and advantages as our existing aluminum models, including 30mm to 75mm frame sizes, 10:1 to 100:1 ratios in most sizes, and maintenance free operation. They are factory filled with synthetic oil and their double lip oil seals prevent leakage. These new models offer IEC input flange types B5 and B14 in order to fit IEC motors in frame sizes 63, 71, 80, and 90.

Just like their NEMA input counterparts, they offer hollow shaft outputs, with single or double output shafts available as accessories, and a hardened worm shaft for increased durability.

Aluminum worm gearboxes are a lower cost, lower weight alternative to stainless steel and cast-iron models. They are ideal for medium-duty applications that have a less frequent run rate or can justify a shorter service life.

IronHorse aluminum gearboxes with IEC inputs start at $130.00

METEcon multi-wire connectors feature quality and cost-effective inserts and housings. Inserts are available in multiple pole configurations from 2 poles plus ground up to 108 poles plus ground, with screw or crimp termination types and sizes ranging from 26 to 12 AWG, 10 to 80 Amps. METEcon housings are made of die-cast aluminum with a polyester powder finish or self-extinguishing thermoplastic and are suitable for use in electrical panels, power connections, and other industrial applications. Crimp contacts ensure a gas-tight, corrosion-free connection with very low contact resistance. METEcon multi-wire connectors provide secure connections and carry UL and CE agency approvals.

METEcon multi-wire connector housings start at $1.75 (29644), inserts start at $2.25 (29007), and crimp contacts start at $39.00 / 100pk. (14106164).

CLICK PLUS CPUs offer the utmost versatility with up to two option slots for custom I/O configurations. These option slots also allow for specialty modules including the C2-DCM serial communication module and the new C2-NRED and C2-OPCUA modules.

The C2-NRED module provides an industrial interface to the most popular open-source software tool for developing IIoT applications - Node-RED^�. With low-code Node-RED programming, you can easily facilitate interactions between the CLICK PLUS CPU and upper-level IT/business systems. This intelligent module utilizes its own processor, ensuring the main CPU remains unburdened but has direct access to the memory of the PLC and all the data needed. The C2-NRED also supports custom JavaScript programming, extending the CLICK PLUS platform's functionality even further.

OPC UA� (Open Platform Communications Unified Architecture) is a long-standing communication protocol used throughout industry and provides a standardized way for industrial systems, regardless of manufacturer, to communicate and share data. The C2-OPCUA module, when added to a CLICK PLUS CPU, allows the simplicity and reliability of CLICK PLCs to be deployed in many more applications that support this protocol.

Also now available is the C2-14TTL option slot module which supports up to 14 low-voltage (~5VDC) high-speed motion control signals. TTL I/O has a much faster response time than standard I/O and provides a long service life due to solid-state switching.

For both the CLICK PLUS and standard CLICK PLCs, a new 4-channel 12-bit analog simulator (C0-04POT) is available. This stackable I/O module connects to the side of the CPU and provides 4 potentiometers that can be used to simulate an analog device for testing or manual control.

All modules come with a 2-year warranty and a 45-day money-back guarantee.

The new option slot modules for CLICK PLUS CPUs start at $65.00 for the C2-14TTL output module, $195.00 for the C2-OPCUA module, and $235.00 for the C2-NRED module. The stackable C0-04POT analog simulator for CLICK and CLICK PLUS is only $68.00.

The new Titanio series of stepper drives from Ever Motion Solutions^® offers peak performance, a rich feature set, and works with our existing SureStep^® stepper motors. Three new drives are available with two open-loop (no encoder feedback) models and one open/closed-loop version (a motor mounted encoder provides position feedback to the drive). Unlike typical stepper drives, Titanio steppers can detect stalls in open-loop control mode by monitoring the motor's back EMF. This allows system designers to take advantage of stall detection without the hassle and expense of a closed-loop system.

Among other advanced features, the Titanio drives use sinusoidal current control to provide extremely smooth motor movement, with reduced audible noise, significant dampening of vibration and resonances, and higher system efficiency (less heat) along with increased and more consistent torque output at all speeds.

The LW3A model is a high-bus-voltage unit which accepts 100-240 VAC power input and is compatible with all STP-MTRACx series high-bus-voltage stepper motors.

While basic dip-switch setup is possible for all models, the optional Ever Studio configuration software (a free download) allows advanced configuration of the LW3A and LW4D stepper drives, including setup of additional microstepping resolutions, and even allows jogging/indexing and a built-in oscilloscope for tuning and debugging the LW4D.

Ever Motion Solutions stepper drives start at $105.00 (LW4D3070N2I1-00).

Murrplastik MP10 series cable/hose drag chains and chain brackets have been added to our growing selection of wire and cable management products. Drag chains route cables/hoses to moving components and help to extend cable/hose life, provide protection for personnel, and reduce equipment downtime and repair costs. The MP10 series is built from rugged polyamide (PA) and is available in various widths with support for cables up to 8mm in diameter. MP10 series cable / hose drag chains feature open slots that allow cables and hoses to be added or replaced after installation. In addition, they can easily be extended or shortened by adding or removing chain links, are available with one, two, or three chambers to enable segregation of cables/hoses within the same chain, and have end brackets that provide secure mounting points.

Murrplastik MP10 drag chains start at $34.00 (CDC-04X02R07T) and drag chain accessories start at $6.00 (CDC-KAZ-04X02).

BLOCK CT and USTE series open core control transformers provide a flexible solution for stepping down a wide range of voltages from 208 to 600 VAC.

The BLOCK CT series is made in the USA, offering a rugged design specifically engineered for isolation, lighting, or signaling systems. It is available with a 240/480 or 600 VAC primary and a 24 or 120 VAC secondary. Ratings range from 50 to 2500 VA, providing a cost-effective solution to guarantee uninterrupted power delivery in various applications. Fused versions are available.

The BLOCK USTE series provides a versatile solution for a wide range of input voltages, allowing OEMs and system integrators to save time and reduce costs by standardizing on a single model. Available in ratings from 40 to 3200 VA, they feature low inrush current, tool-free push-in wire terminals, and thirteen jumper selectable primary inputs from 208 to 600 VAC. In addition, the 12/24 VAC models comply with safety standards to ensure a safe power supply for SELV (Safety Extra Low Voltage) circuits.

BLOCK open core control transformers are RoHS compliant, CE marked, and come with a 3-year warranty. The CT series is UL Recognized and starts at $53.00 (CT-005-060-24-0), while the USTE series is UL Listed and starts at $64.00 (USTE40/2X12).

Additional Murrplastik frames and grommets have been added to our current offering of cable entry systems. Cable entry frames used in conjunction with the required grommets provide easy cable installation through an enclosure and strain relief while maintaining environmental ratings. This expansion adds more frame sizes to our existing KDL/D and KDL/D-Mono series, a blank large BTG/XL grommet to the KDT/X series, and the new KDL/D-R and KDP/Z series which provide more solid- and split-frame options. The KDP/Z series features a built-in sealing membrane that does not require separate grommets to be purchased.

Murrplastik KDP/Z series frames have a high IP65, IP66, IP67, IP69K protection rating (depending on model) and start at $69.00 (567409); KDL/D, KDL/D-R, and KDL/D-Mono series frames start at $32.00 (568318), and KDT/X and BTG/XL large grommets start at $16.50 (568375).

Our growing selection of wiring solutions has expanded to include WAGO splicing connectors. The 221 series LEVER-NUTS^� are equipped with WAGO's CAGE CLAMP^� spring technology, allowing quick and easy connection of all conductor types of different cross sections using two-, three-, and five-wire connectors without soldering or using tools. The 221 series connectors accommodate solid, stranded, and fine-stranded conductors in two variants from 12-24 AWG and 10-20 AWG. The 221 series inline splicing connector includes all the trusted advantages of the 221 series but in a slim design. The 2773 series' PUSHWIRE^� technology allows solid, stranded, ferruled, and fine-stranded conductors to be terminated by simply pushing them in, with no operating tool needed.

WAGO 221 series LEVER-NUTS splicing connectors start at $15.50 / 25pk. (221-415), the inline 221 series splicing connector is priced at $24.00 / 60pk. (221-2401), and the 2773 series splicing connectors start at $9.50 / 60pk. (2773-405).

New WEG general-purpose CFW320 AC drives and full-featured SSW900 soft starters are now available. The CFW320 series VFDs offer all the features of the existing CFW300 plus provide support for 460 VAC operation and Ethernet communications. These drives support 230 VAC 3-phase motors up to 5 hp and 460 VAC motors up to 10 hp. Dynamic braking is built in on many models, so no external braking chopper is required. The optional Ethernet module communicates over EtherNet/IP and Modbus TCP networks.

The new SSW900 soft starters offer motor support up to 950A and a voltage range of 220-575 VAC. These soft starters feature an advanced setup with parameter help and event history on the included HMI. Software setup is optional using free WPS software and the same software is used for all WEG drives and soft starters. Ethernet communication is optional on the SSW900.

All WEG AC drives, soft starters, and accessories come with a 1-year warranty. WEG CFW320 drives start at $165.00 (CFW320A01P6S2NB20) and the SSW900 soft starters start at $860.00 (SSW900A0010T5E2B).

New Gladiator GPB1 and GPB2 series enclosed style terminal blocks provide a safe and reliable way to connect multiple electrical circuits to a single power source.

The GPB1 series terminal blocks are ultra-compact, offering time-saving multiple wire connection options for a variety of control panel applications. Push-in spring connections save installation time by locking the screwdriver into place for virtually hands-free wiring. GPB1 series terminal blocks are offered in ampere ratings up to 130 Amps and voltage ratings up to 1000 VAC / 1500 VDC (suitable for solar applications). They provide an IP20 finger-safe protection rating and a 100kA SCCR with proper fusing.

The GPB2 series terminal blocks feature a space-saving modular design and an innovative interlocking system for easy multi-pole assembly. They offer a 100kA SCCR rating with proper fusing and are available in ampere ratings up to 510 Amps and voltage ratings up to 1000 VAC / 1500 VDC (suitable for solar applications). The blocks can be reversed to group multiple inputs into a single output. Covers can be opened in two directions; pre-printed markers provide fast and easy identification.

The Gladiator enclosed style terminal blocks and busbars are UL recognized, CE approved, and RoHS compliant. They come with a 1-year warranty and start at $12.50 (GPB2-80P1-4L).

Additional Zener barriers from STAHL have been added to isolate various control signal types from hazardous environments. For automated systems installed in potentially explosive atmospheres (ex., oil and gas production), extra precautions must be taken to ensure the electrical circuits do not become ignition sources. Properly grounded Zener barriers isolate the electrical signal from the hazardous area. New barriers are available to protect the following circuits: 4-20 mA/PNP sensor, NPN sensor/dry contacts, pulse trains (11 or 18 VDC), and strain gauges.

STAHL Zener barriers come with a 1-year warranty and start at $201.00 (9002/22-240-024-001).

AutomationDirect announces the addition of configurable and programmable safety relays from Schmersal. Many safety systems require more than one specialty safety relay but don't justify the need for a safety controller. Schmersal PROTECT SRB-E configurable relays are easy to set up and reduce the number of safety relays required for a machine or system. They include up to 4 pairs of safety inputs and up to 5 safety outputs. Configurable relays support several different applications and can monitor all conventional safety devices. Schmersal PROTECT SELECT programmable relays can replace up to 8 safety relays, have a simple multilingual menu on a color display, and report error and status messages. Programmable relays require no prior programming experience and offer 4 pre-configured safety monitoring programs to choose from.

All relays provide a safety level up to PLe/SIL 3, come with a 1-year warranty, and start at $171.00 (SRB-E-201LC).

Dold VARIMETER series voltage and phase monitoring relays safeguard electrical equipment and prevent costly downtime by evaluating voltage levels and phase sequences to provide early detection and response to abnormalities such as undervoltage, overvoltage, phase loss, phase reversal, and phase imbalance. The VARIMETER series monitoring relays feature wide voltage measuring ranges, compact frame sizes, and integrated terminal bases.

The new Dold voltage monitoring relays are available in measuring ranges up to 250 VDC or 300 VAC. They continuously monitor voltage levels and respond when the voltages exceed or fall below a predetermined threshold. Four single-turn switches offer quick and easy configuration for a broad range of applications.

VARIMETER series phase monitoring relays detect phase unbalance, phase reversal, phase loss, and missing or broken neutrals in three-phase AC systems up to 525 VAC. Select models offer advanced phase loss protection, while others provide overvoltage, undervoltage, voltage range, and missing neutral monitoring options for single- or three-phase applications. Simple single-turn switches allow quick and easy configuration without a complex menu structure.

The new Dold VARIMETER series phase and voltage monitoring relays are UL listed, CE marked, and RoHS compliant. They offer a 1-year warranty and start at $121.00 (RN9877-1203P4W525V)

Seven new sizes of PBC Linear guide tracks with slides are now available in lengths up to 2000mm. The guide tracks are ceramic coated 6061-T6 aluminum, paired with a self-lubricating slide. The slides have a proprietary, PTFE (FrelonGOLD^�) plain bearing bonded to the mating surface.

These guide tracks and slides are rated for static loads up to 8,200 N (1,843 lbf) and extreme temperatures from -400�F to 400�F (-240�C to 204�C). They offer smooth, quiet operation with inherent vibration damping and shock resistance, and the maintenance free bearing surfaces require no additional lubricant.

New roller pillow blocks have aluminum housings with sealed cam follower bearings (carbon steel) and offer linear travel speeds up to 7.6m/s (25ft/s). These industry-standard pillow blocks are designed for use with precision ground linear shafts such as the PBC Simplicity 60 Plus series (sold by AutomationDirect) and are available in single, double, and twin styles. Single styles are self-aligning and can be used on curved rails.

New PBC Linear guide tracks with slides included start at $48.50 (MR07-0100-1). The roller pillow blocks start at $145.00 (SPB-12-OPN).

Southwire flexible metal conduit has joined our growing selection of electrical conduit and wiring solutions. Southwire's Alflex^™ type RWA (Reduced Wall Aluminum) and Galflex^™ type RWS (Reduced Wall Steel) conduits are built using a metal strip that is helically formed into a continuously interlocked flexible metal conduit which can withstand impact and crushing forces. Southwire's Alflex type RWA and Galflex type RWS are designed for use with connectors intended for NEC Type FMC (Flexible Metal Conduit) and are REACH/RoHS-2 compliant. Alflex type RWA is manufactured with a lightweight, high-strength aluminum alloy 66% lighter than steel and has superior corrosion resistance. Galflex type RWS is hot-dipped for a heavy zinc, rust/corrosion resistant coating.

Alflex type RWA flexible metal conduit coils start at $22.00 (55082021), and Galflex type RWS flexible metal conduit coils start at $25.50 (55081711).

ProSense FLG series detecting grids offer a cost-effective solution for object detection, featuring a simple setup with no programming required. They have no dead zone on the full detection height and are perfect for a variety of applications, such as material handling, counting, and warehousing.

The ProSense FLG series detection light grids with discrete complementary outputs provide object detection signals and are available with detection heights up to 1580mm. They offer 20 or 40mm beam resolution options, a 0.1 to 10m operating distance, and rugged aluminum housings with an IP67 protection rating.

ProSense detection light grids are NOT protective devices and should not be used to guarantee personnel safety.

ProSense FLG series detection light grids are sold in sender/receiver pairs, are UL listed, CE marked, and RoHs compliant. They offer a 1-year warranty and start at $308.00 (FLG-A46-0280).

New Penn-Union compression lugs provide a secure method of terminating electrical cables, especially high power or large diameter cables, to electrical equipment. Unlike mechanical lugs, that are screwed/clamped in place, these connectors are crimped onto the cable using the appropriate crimping tool for a permanent installation. These connectors are rated for use with copper conductors, have a beveled entry for easy cable insertion, and have color-coded barrels that are marked with die index numbers making inspections and certified installations much simpler. Penn-Union compression connectors are certified to be installed using commonly found tools and do so without loss of agency certification.

Also included are Penn-Union compression lug tools that feature a small head designed for use in confined spaces. The unique telescopic handle design (TDM) provides increased leverage when needed and the tools support 8 AWG up to 500 MCM wire/cable.

The new Penn-Union compression lugs offer quick and easy cable/wire installation and start at $1.50 (BLU-8S14-1). The Penn-Union compression lug tools start at $361.25 (TDM-250).

Four new series of Lika Electronic encoders are available, with unique features or applications. Linear measuring wheel encoders are also available.

A41 series models are compact (41mm diameter body) medium duty encoders with hollow or solid shafts. Resolutions from 100 to 3600 PPR are available.

A50 series units are medium duty encoders designed to withstand high temperature environments up to 100 C (212F) with � inch or 3/8 inch hollow shafts, in resolutions from 360 up to 2048PPR.

A80 series medium duty encoders are designed to fit large AC motors, with a 30mm hollow shaft and 1024 PPR resolution. A selection of reducer bushings is available to accommodate metric or SAE shafts.

AQ5x series medium duty encoders have programmable resolution from 1 to 16,384 PPR. These encoders have a 58 mm or 59 mm body diameter and either a 3/8 inch solid shaft or a 15mm hollow shaft; reducer bushings are available.

All Lika Electronic encoders operate at 5-30VDC and have universal output circuitry which provides push-pull (HTL/totem pole), NPN/PNP open collector (HTL), or line driver (TTL) output signals. A selection of M12 and M23 cables are available for connectorized encoders.

AR01 series encoder linear measuring systems are designed to ride directly on a product or a conveyer belt to measure length, distance, or provide speed control feedback. They are often used for cut-to-length and positioning applications.

New Lika rotary encoders start at $101.00 (A41S-0200-HZCP6-AL2). The encoder linear measuring systems are priced at $329.00 (AR01-0250-HM12-A). A complete line of accessories (cables, bushings, couplings and replacement parts) is also available.

Endress+Hauser Soliphant vibration rod level switches detect fine- or coarse-grained, non-fluidized bulk solids in silos, hoppers, and bins. They can even detect solids underwater, such as sediment buildup in a tank. These robust switches are insensitive to build-up, providing maintenance-free operation and easy setup with no calibration required.

They feature rugged plastic or aluminum housings, 316L stainless steel sensing elements, and come with solid state or relay outputs. Select models offer hazardous location ratings. These cost-effective sensors have a wide range of applications and can be installed in any orientation to indicate full, demand, or empty status.

The new Endress+Hauser Soliphant vibration rod level switches are UL Listed, CSA general purpose or FM hazardous location approved (certain models), CE marked, and RoHS compliant. They offer a 1-year warranty and start at $706.00 (FTM20-AM23A).

Captron capacitive pushbuttons utilize touch control and are activated without pressure when a hand or body part nears the device's surface. They feature a robust IP69K design, wear-free operation, resistance to water, oil, and harsh environments, and are available in various mounting/operator sizes.

Caneo Series10 additions include more standard and stainless-steel hygienic models with static or dynamic switch types and blank, power symbol, or RESET legends. They are available in automatic or semi-automatic LED control modes and provide a convenient 7.87in. (200mm) pigtail connection for quick installation.

New Caneo Series41 solid display capacitive switches combine a flange-mount capacitive switch with a sturdy aluminum terminal base that can withstand the harshest of environments. These switches feature an ergonomic design for ease of use and a robust construction for long-lasting, reliable performance. They combine status, control signal, and 7-segment display into one compact device.

New Caneo Series40 puck-style standard and display type capacitive switches offer the same reliable performance as the Series41 in a compact, encapsulated polycarbonate housing. Their standard 22mm mounting provides a low-cost solution to quickly and easily retrofit and modernize aging installations.

The new Captron Caneo series capacitive pushbuttons start at $63.00 , are CSA approved, CE marked, RoHS compliant, and come with a 5-year warranty.

Advantech Modbus gateways allow connections of multiple serial devices to an industrial Ethernet network for centralized machine communication management. Advantech Modbus gateways provide easy integration of Modbus TCP and Modbus RTU/ASCII networks and offer two 10/100 Mbps Ethernet ports for LAN redundancy. These gateways allow quick setup and easy troubleshooting with a simple-to-use web interface and provide up to four software selectable RS-232/422/485 ports. Configurations allow up to 16 peer connections under Modbus Client mode and up to 32 peer connections under Modbus Server mode on each serial port.

Also added is the ZIPLink ZL-CMA9 9-position terminal block to 9-pin D-sub female port adapter communication module. This adapter provides fast and convenient screw terminal connections for D-sub ports on Advantech Modbus gateways or any other compatible device.

The Advantech Modbus gateways start at $278.00 (EKI-1221-CE). The ZIPLink ZL-CMA9 adapter is $26.00 (ZL-CMA9).

Teknokol Eco series HMI enclosures and suspension arm systems are designed to work together to provide customized arm systems using a selection of their components and cut-to-length arm profiles to best fit specific applications. The medium-duty TK060 series suspension arm system is designed for lighter loads and includes component options that allow custom configurations. The TK120 series offers the same design flexibility but is a heavy-duty option for heavier enclosures. Accessories that fit these specific enclosures have been added including various handle options that can be mounted on the sides or bottom of the enclosure and removable front plates.

Teknokol HMI enclosures start at $349.00 (ECO1500.0008), suspension arm system components start at $27.00 (TK120.310), and accessories start at $26.00 (ECO.HAND.401).

The new Murrelektronik Premium EtherCAT IO-Link master module adds more communication options to our IO-Link product lineup. IO-Link masters provide standardized, point-to-point connections between smart devices and controllers. The new Murrelektronik master module adds EtherCAT capability to our IO-Link offering which also includes options for MQTT, OPC UA, and EtherNet/IP. Typical IO-Link systems consist of one IO-Link master (the interface between IO-Link and higher-level systems that also controls data traffic between the connected IO-Link devices) and at least one IO-Link device. Murrelektronik IO-Link hubs allow several sensors and actuators to be easily connected to an IO-Link master via a standard sensor cable. These hubs transmit standard field I/O signals, and several new models have been added, including more discrete I/O modules and modules that support analog/temperature inputs.

The Murrelektonik Premium EtherCAT IO-Link master module is priced at $415.00 (54632), the new IO-Link hubs start at $224.00 (59712).

New high quality Helukabel unshielded "extra hard use" 600V SOOW and 300V SJOOW portable cord is now available. Portable cord (also called service cord) is a cable with multiple conductors used for electrical power connections that are not intended to be permanent. Applications for these cables often involve portable equipment such as power tools or temporary installations such as work site lighting. These cables have EPDM thermoset rubber conductor insulation material and a black CPE thermoset rubber jacket that provides excellent resistance to abrasion, hot surface contact, harsh conditions, and extreme temperatures.

Order Helukabel SOOW and SJOOW portable cord cut to length in 1-foot increments with a 20 ft. minimum, starting at $0.33 / ft. (H11131802-1).

AutomationDirect announces the addition of more high-performance ACCU-Torq motors from Nidec U.S. MOTORS. ACCU-Torq motors are inverter duty motors and are an excellent cost-effective solution for applications that require 100% torque down to zero speed. These motors are available in 230/460 VAC and are now offered in sizes up to 20 hp at 1800rpm and from � to 10 hp at 1200rpm. Additionally, models with a preinstalled encoder are available in sizes from � to 20 hp at 1800rpm. A separately purchased encoder retrofit kit, which includes an Avtron HS35A full-quadrature encoder, is also now available.

ACCU-Torq motors with a 143 frame or larger come with a 3-year warranty and start at $578.00 (UN1T3BC).

New Schneider Electric Easy TeSys series manual motor protectors, contactors, thermal overload relays, and accessories have been added to AutomationDirect's lineup of motor control products. Schneider Electric Easy TeSys series IEC manual motor protectors are compact, easy to use, and cover the functions of disconnect, controller, thermal overload relay, and branch circuit protection in a single device. They are pushbutton operated and available in ratings up to 32A. Easy TeSys series IEC magnetic contactors offer a compact design for easy installation, a 45mm frame width, and have a long life expectancy of up to one million electrical operations. They have a built-in N.O. auxiliary contact and are available in a variety of coil voltages, with ratings from 3 to 20 hp (38A) at 480 VAC. Schneider Electric Easy TeSys series IEC thermal overload relays offer an adjustable current range and are designed for direct connection to the Easy TeSys contactors. They protect against overloads, phase failures, Iong starting times, and are available in ratings up to 32A.

Schneider Electric motor controls have a 1-year warranty and are UL Listed, CSA approved, CE marked, and RoHS compliant. The Easy TeSys series IEC manual motor protectors start at $69.00 (GP2E01), contactors start at $29.50 (DPE09B7), and thermal overload relays start at $29.50 (DPER01).

New FTG enclosed style power distribution and terminal blocks provide a convenient central location to connect several wires and distribute power from a single source to multiple loads.

The enclosed power distribution blocks feature a modular design for easy multi-pole assembly and an IP20 finger-safe protection rating. They are offered in ampere ratings up to 380A, UL voltage ratings up to 1000 VAC/VDC, and a 100kA SCCR with proper fusing. These enclosed style blocks include many innovative refinements, such as selectable phase identification, color marking plates, simple and secure DIN mounting clips, an incoming cable safety slide, and connection clips for multi-pole applications.

The enclosed style terminal blocks feature an IP20 finger-safe construction and are available in ampere ratings up to 840A, voltage ratings up to 600 VAC, and a 10kA SCCR. They are suitable for aluminum or copper conductors for maximum safety and flexibility. DIN rail or surface mounting makes installation fast and easy.

In addition, new Gladiator cuttable busbars for GMCB/GMCBU series miniature circuit breakers and supplementary protectors are now available. These busbars feature an IP20 finger-safe protection rating, are rated up to 100A (200A with center feed), and can connect up to (57) 1-pole, (28) 2-pole, or (19) 3-pole breakers without auxiliary components.

The FTG enclosed style power distribution and terminal blocks are CE marked, RoHS compliant, and offer a 2-year warranty. The power distribution blocks are UL listed and start at $21.00 (38680C); the terminal blocks are UL recognized and start at $15.50 (38049AL); the new Gladiator busbars start at $22.50 (GMCBU-BB1P-12-100C).

New AchieVe FDM series 12mm tubular photoelectric sensors offer a rugged metal construction, high IP67 protection ratings, and sensing distances up to 4 meters. These photoelectric sensors feature selectable light-on/dark-on operation, a 10 to 30 VDC operating voltage range, potentiometer or teach-in button sensitivity adjustment, and a fast 1kHz switching frequency. Highly visible red LED models are offered with the polarized reflective sensing style, while infrared models are available in diffuse and through-beam styles.

The new AchieVe FDM series photoelectric sensors are UL Listed, CE and UKCA marked, and RoHS compliant. They offer a 3-year warranty and start at $38.50 (FDM3-0N-1A).

Bondhus hex and Torx tools are precision machined in the USA with a proprietary high-torque steel for reliable long-lasting service life. Hex-end L-key sets have chamfered tool tips to eliminate burrs and provide proper seat. Ball-end L-key sets insert at a 25� angle, allowing for superior torque transfer and natural wrist movement, ideal for hard-to-reach places. Torx L-key sets are designed for more torque and can be used on Torx and star screws. GorillaGrip fold-out hex and Torx sets are compact, color coded, easy to use, and include a speed-wrench feature. HEX-PRO^™ pivot head wrenches feature a head that pivots from 90� to 270� and eliminates constant removal and repositioning of the tool. ProHold� socket bit sets provide firm grip of the bits and seat firmly into sockets, providing stability and efficiency.

Bondhus hex and Torx tool sets start at $7.00 (BH12237).